Sistem Pendukung Keputusan Menentukan Sales Terbaik Menerapkan Metode Simple Additive Weighting (SAW)
- Rima Tamara Aldisa Universitas Nasional, Jakarta, Indonesia
-
Fifto Nugroho
*
Universitas Bung Karno, Jakarta,
Indonesia
- Mesran Mesran Universitas Budi Darma, Medan, Indonesia
- Susi Agustini Sinaga Universitas Budi Darma, Medan, Indonesia
- Kelik Sussolaikah Universitas PGRI Madiun, Madiun, Indonesia (*) Corresponding Author
Abstract
In this study, the author uses the SAW (Simple Additive Weighting) method to determine the best sales at marketing company. The SAW method is considered appropriate in determining the best sales because the SAW method performs the weighted summation process of the performance rating on each alternative on all attributes. This research was conducted by determining the criteria, alternatives and weights, then carried out the matrix preparation process, calculating normalization and calculating preferences. So from the results of the calculation of preferences, a ranking process is carried out to determine the best alternative. The results of the study provide recommendations for the 6th alternative which has the highest value with a value of 0.879 being the best sales.
Downloads
References
V. C. Hardita, E. Utami, and E. T. Luthfi, “Sistem Pendukung Keputusan Pemilihan Sales Terbaik,” Creat. Inf. Technol. J., vol. 5, no. 2, p. 138, Jul. 2019.
R. Y. Simanullang, Melisa, and Mesran, “Sistem Pendukung Keputusan Penerima Bantuan Covid-19 Menggunakan Metode Simple Additive Weighting (SAW),” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 2–9, 2021.
I. J. T. Situmeang, S. Hummairoh, S. M. Harahap, and Mesran, “Application of SAW (Simple Additive Weighting) for the Selection of Campus Ambassadors,” IJICS (International J. Informatics Comput. Sci., vol. 5, no. 1, pp. 21–28, 2021.
R. Fauzan, Y. Indrasary, and N. Muthia, “Sistem Pendukung Keputusan Penerimaan Beasiswa Bidik Misi di POLIBAN dengan Metode SAW Berbasis Web,” J. Online Inform., vol. 2, no. 2, p. 79, 2018.
E. Turban, J. Aronson, and T. Llang, Decision Support Systems and Intelligent Systems. 2003.
T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.
S. Ayu Rizkandari, R. Saptono, and , W., “Pemanfaatan Metode Simple Additive Weighting (SAW) Dalam Penentuan Mahasiswa Berprestasi Tingkat Universitas Sebelas Maret Surakarta,” J. Teknol. Inf. ITSmart, vol. 3, no. 1, p. 34, 2016.
Asminah, “Penerapan Metode Simple Additive Weigthing Untuk Penentuan Level Kondisi Penyandang Disabilitas,” Build. Informatics, Technol. Sci., vol. 3, no. 4, pp. 559–565, 2022.
R. P. Sari and M. R. Maulana, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” J. Sist. Komput. dan Inform., vol. 2, no. 3, pp. 472–478, 2021.
S. K. Simanullang and A. G. Simorangkir, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 472–478, 2021.
S. H. Sahir, R. Rosmawati, and K. Minan, “Simple Additive Weighting Method to Determining Employee Salary Increase Rate,” Int. J. Sci. Res. Sci. Technol., vol. 3, no. 8, pp. 42–48, 2017.
R. P. Sari and E. Rasimin, “Sistem Pendukung Keputusan Pemilihan Kategori Skripsi Bagi Mahasiswa Sistem Informasi,” J. Sist. Komput. dan Inform., vol. 2, no. 3, pp. 339–347, 2021.
J. D. Manik and A. R. Samosir, “Penerapan Metode Simple Additive Weighting dalam Penerimaan Siswa Magang pada Universitas Budi Darma,” sudo J. Tek. Inform., vol. 1, no. 2, 2022.
M. R. Ramadhan, M. K. Nizam, and ..., “Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Siswa-Siswi Berprestasi Pada Sekolah SMK Swasta Mustafa,” TIN Terap. Inform. …, vol. 1, no. 9, pp. 459–471, 2021.
M. D. L. Siahaan, Elviwani, A. B. Surbakti, A. H. Lubis, and A. P. U. Siahaan, “Implementation of Simple Additive Weighting Algorithm in Particular Instance,” Int. J. Sci. Res. Sci. Technol., vol. 3, no. 6, pp. 442–447, 2017.
S. Yudha Prayogi, “Penerapan Metode Simple Additive Weighting Dalam Pemilihan Tablet Pc Untuk Pemula,” CESSJournal Comput. Eng. Syst. Sci., vol. 1, no. 1, pp. 35–40, 2016.
S. Sumarno, I. Gunawan, and H. S. Tambunan, “Sistem Pendukung Keputusan Menentukan Aparatur Sipil Negara Terbaik Pada Dinas Pengelolaan Sumber Daya Air Unit Pelaksana Teknis Dinas dengan Metode Simple Additive Weighting,” J. Sist. Komput. dan Inform., vol. 1, no. 1, p. 31, 2019.
A. Zumarniansyah, R. Ardianto, Y. Alkhalifi, and Q. Nur Azizah, “Penerapan Sistem Pendukung Keputusan Penilaian Karyawan Terbaik Dengan Metode Simple Additive Weighting,” J. Sist. Inf., vol. 10, no. 2, 2021.
M. T. Vaneza, Mesran, J. Afriany, W. Julitawaty, and K. Sussolaikah, “The IJICS ( International Journal of Informatics and Computer Science ) Implementation of the Simple Additive Weighting ( SAW ) Method in the Selection of Recipients of Social Funds for Poor Families,” IJICS (International J. Informatics Comput. Sci., vol. 5, no. 3, pp. 298–304, 2021.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Pendukung Keputusan Menentukan Sales Terbaik Menerapkan Metode Simple Additive Weighting (SAW)
Pages: 548-556
Copyright (c) 2022 Rima Tamara Aldisa, Fifto Nugroho, Mesran Mesran, Susi Agustini Sinaga, Kelik Sussolaikah
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
