Penerapan Metode Simple Additive Weighting (SAW) dan SWARA dalam Pendukung Keputusan Pemilihan Penerimaan Karyawan Apoteker
Abstract
Drugs are the most important needs in alleviating and overcoming complaints of illness suffered by patients, a patient will certainly go to the nearest drug store or pharmacy to ask for advice in drug selection to a pharmacist, as a pharmacy or drug store Of course, it is very dangerous to choose a pharmacist without proper knowledge and insight into medicines. Failure to choose a pharmacist will result in losses to the company or pharmacy as well as patient safety, so an expert understanding is needed to determine the standards of a pharmacist to be trusted, selecting employees using a decision support system is the right step to reduce the risk that will occur. in the future. The decision support system in this study uses the SWARA method in determining the weight of the criteria based on expert opinion and the Simple Additive weigh (SAW) method as a ranking method based on the highest value. The results of this study selected alternative A4 on behalf of Tika which has a value of 95% as the alternative that most meets the standards
Downloads
References
Z. Ying, Z. Jianqiu, U. Akram, and H. Rasool, “TAM model evidence for online social commerce purchase intention,” Inf. Resour. Manag. J., vol. 34, no. 1, pp. 86–108, 2021.
B. Phadermrod, R. M. Crowder, and G. B. Wills, “Importance-Performance Analysis based SWOT analysis,” Int. J. Inf. Manage., vol. 44, pp. 194–203, 2019.
Despitaria, H. Sujaini, and Tursina, “Analisis Asosiasi pada Transaksi Obat Menggunakan Data Mining dengan Algoritma A Priori,” Justin, vol. 4, no. 2, p. 6, 2016.
A. Kualitatif et al., “Sabtanti Harimurti *, Asep Setiyawan Laboratorium Kimia Farmasi : Program Studi Farmasi , Fakultas Kedokteran dan Ilmu Kesehatan , Universitas Muhammadiyah Yogyakarta , Jl . Brawijaya , Tamantirto , Kasihan , Bantul , Yogyakarta ,” vol. 6, no. 2, pp. 43–50, 2019.
I. Wijaya and Mesran, “Penerapan Metode AHP dan VIKOR Dalam Pemilihan Karyawan Berprestasi,” in Seminar Nasional Teknologi Komputer & Sains (SAINTEKS), 2019, pp. 301–309.
S. Hashemkhani Zolfani, M. Yazdani, and E. K. Zavadskas, “An extended stepwise weight assessment ratio analysis (SWARA) method for improving criteria prioritization process,” Soft Comput., vol. 22, no. 22, pp. 7399–7405, 2018.
V. Keršulienė, E. K. Zavadskas, and Z. Turskis, “Selection of Rational Dispute Resolution Method By Applying New Step‐Wise Weight Assessment Ratio Analysis (Swara),” J. Bus. Econ. Manag., vol. 11, no. 2, pp. 243–258, 2018.
L. N. Hayati and R. Anugrah, “MIPA TINGKAT SD MENGGUNAKAN METODE SAW ( SIMPLE ADDITIVE WEIGHTING ),” vol. 3, no. 2, pp. 82–88, 2020.
E. Sugiyarti and A. Maseleno, “Sistem Pendukung Keputusan (Dss) Penyeleksian Pemilihan Penerima Beasiswa Sma N 1 Ulubelu Tanggamus Mengunakan Data Mining,” Konf. Mhs. Sist. Inf., vol. 6, no. 1, pp. 62–69, 2018.
G. N. Yücenur and A. Ipekçi, “SWARA/WASPAS methods for a marine current energy plant location selection problem,” Renew. Energy, vol. 163, pp. 1287–1298, Jan. 2021.
E. W. Winarni, Teori dan Praktik Penelitian Kualitatif dan Kuantitatif PTK dan R&D. Jakarta: Bumi Aksara, 2018.
E. Kılıç Delice, G. F. CAN, and E. KAHYA, “improving the rapid office strain assessment method with an integrated multi-criteria decision making approach,” Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Derg., no. September, 2020.
H. Halimah, D. Kartini, F. Abadi, I. Budiman, and M. Muliadi, “Uji Sensitivitas Metode Aras Dengan Pendekatan Metode Pembobotan Kriteria Sahnnon Entropy Dan Swara Pada Penyeleksian Calon Karyawan,” J. ELTIKOM, vol. 4, no. 2, pp. 96–104, 2020.
Z. Chen, P. Zhong, M. Liu, H. Sun, and K. Shang, “A novel hybrid approach for product concept evaluation based on rough numbers, shannon entropy and TOPSIS-PSI,” J. Intell. Fuzzy Syst., vol. 40, no. 6, pp. 12087–12099, 2021.
M. E. Saputri, “Pengaruh Perilaku Konsumen Terhadap Pembelian Online Produk Fashion Pada Zalora Indonesia the Effect of Consumer Behavior Toward the Online Purchase of Fashion Product of Zalora Indonesia,” Sosioteknologi, vol. 15, no. 2, pp. 291–297, 2016.
M. Badaruddin, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Menerapkan Kombinasi Metode Simple Additive Weighting (SAW) dengan Rank Order Centroid (ROC),” J. Media Inform. Budidarma, vol. 3, no. 4, p. 366, 2019.
I. J. T. Situmeang, S. Hummairoh, S. M. Harahap, and Mesran, “Application of SAW (Simple Additive Weighting) for the Selection of Campus Ambassadors,” IJICS (International J. Informatics Comput. Sci., vol. 5, no. 1, pp. 21–28, 2021.
M. R. Ramadhan, M. K. Nizam, and Mesran, “Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Siswa-Siswi Berprestasi Pada Sekolah SMK Swasta Mustafa,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 459–471, 2021.
R. Y. Simanullang, Melisa, and Mesran, “Sistem Pendukung Keputusan Penerima Bantuan Covid-19 Menggunakan Metode Simple Additive Weighting (SAW),” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 2–9, 2021.
S. K. Simanullang and A. G. Simorangkir, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 472–478, 2021.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Metode Simple Additive Weighting (SAW) dan SWARA dalam Pendukung Keputusan Pemilihan Penerimaan Karyawan Apoteker
Pages: 12-17
Copyright (c) 2022 Salmon, Ita Arfyanti

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).





















