Security Sistem Pada Brankas dengan Metode Personal Identifikasi Number Berpola Aritmatika Modulo
-
Woro Agus Nurtiyanto
*
Universitas Pamulang, Tangerang Selatan,
Indonesia
- Perani Rosyani Universitas Pamulang, Tangerang Selatan, Indonesia
- Moch Koiru Ihksanudin Universitas Pamulang, Tangerang Selatan, Indonesia (*) Corresponding Author
Abstract
The burglary of a safe in Jombang, East Java, lost valuables belonging to the Multipurpose Business Cooperative (KSU) Niaga Cemerlang. Therefore, a security system tool was made in the safe where it functioned as storing valuables and important assets. Changing the security system using a security system with a personal identification number method with a modulo arithmetic pattern. The safety system of the safe is designed in layers installed with an RFID tag by registering and then verifying it on the card. Entering the password on the card is unreadable or unverified, then the system will refuse to open. Arduino mega component with type 256, passive RFID tag attached to the RFID reader, only 1 validated passive tag can open the security access system with 6 keypad passwords that are inputted only 3. Transistors in the solenoid driver circuit work after the security system is open. The servo motor can rotate according to the input of the 900. open servo angle rotation program
Downloads
References
E. Budianto, “Brankas Koperasi Di Jombang Dibobol Pencuri,” Detiknews, Rabu Juli 2019.
A. S. Y. R. Hani Dewi Ariessanti, “Pengaman Brankas menggunakan Voice Dengan media Bluetooth Berbasis Mikrokontrller ATmega 328,” CCIT Journal, vol. 9, no. 1, p. 27, 2015.
E. E. M. Fakri Husni, “RANCANG BANGUN PENGAMAN BRANKAS MENGGUNAKAN RFID (RADIO FREQUENCY IDENTIFICATION), PIN DAN GPS BERBASIS ARDUINO MEGA DAN INTERNET OF THINGS (IOT),” Journal of Multidicsiplinary Research, vol. 4, no. 2, p. 45, 2022.
Y. M. D. Fajar Fadila, “PROTOTYPE SISTEM PENGAMAN PINTU MENGGUNAKAN ELETRONIK KARTU TANDA PENDUDUK (e-KTP) BERBASIS NODE MCU ESP8266,” Prosiding Seminar Nasional Informatika dan Sistem Informatika, vol. 6, no. 1, pp. 60-75, 2021.
M. N. T. L. Wahyu Noor Alamsyah, “RANCANG BANGUN SISTEM KEAMANAN BRANKAS MENGGUNAKAN RADIO FREQUENCY IDENTIFICATION (RFID) DENGAN NOTIFIKASI VIA SMS,” Indonesian Journal of Technology, Informatics and Science , vol. 2, no. 1, pp. 1-4, 2020.
K. P. K. Okta Rea Arsyad, “RANCANG BANGUN ALAT PENGAMAN BRANKAS MENGGUNAKAN SENSOR SIDIK JARI BERBASIS ARDUINO,” Jurnal Mahasiswa Teknik Informatika, vol. 5, no. 1, pp. 1-7, 2021.
H. R. A. R. S. Ath Thaareq Mahesa, “Sistem Keamanan Brankas Berbasis Kartu E-ktp,” Jurnal Teknologi & Manajemen Informatik, vol. 5, no. 1, pp. 1-9, 2019.
A. Desiani dan M. Arhami, Konsep Kecerdasan Buatan, 1 penyunt., D. Hardjono, Penyunt., Yogyakarta: Penerbit ANDI, 2006.
Kusrini, Sistem Pakar Teori dan Aplikasi, 1 penyunt., f. Suyantoro, Penyunt., Yogyakarta: Penerbit ANDI, 2006.
A. Desiani dan M. Arhami, Konsep Kecerdasan Buatan, 1 penyunt., D. Hardjono, Penyunt., Yogyakarta: Penerbit ANDI, 2006.
I. A. Adriana, Penalaran Komputer Berbasis Kasus (Case Based Reasoning), Yogyakarta: Ardana Media, 2007.
R. D. R. e. all, Telinga Hidung Tenggorok Kepala dan Leher edisi ketujuh, Jakarta: FK UI, 2012.
E. M. V. S. T.Sutojo, Kecerdasan Buatan, Yogyakarta: Andi, 2011.
S. W. Faza Akmal, “SISTEM PPAKAR UNTUK MENDIAGNOSA PENYAKIT LAMBUNG DENGAN IMPLEMENTASI METODE CBR (CASE BASED REASONING) BERBASIS WEB,” Jurnal Sarjana Teknik Informatika, vol. 2 , no. 1, Februari 2014.
A. M. M. M. N. W. a. N. F. Adiwijaya, “A comparative study of MFCC-KNN and LPC-KNN for hijaiyyah letters pronounciation classification system,” Information and Communication Technology (ICoIC7), pp. (pp. 1-5), 2017.
M. N. Al-Kabi, G. Kanaan, R. Al-Shalabi, S. Al-Sinjilawi dan R. S. Al-Mustafa, “Al-Hadith Text Classifier,” Journal of Applied Sciences 5, pp. 584-587, 2005.
F. Harrag dan E. El-Qawasmah, “Neural Network for Arabic Text Classification,” 2009 Second International Conference on the Applications of Digital Information and Web Technologies, pp. 778-783, 2009.
E. R. R. J. S. A.-F. dan A. , “Klasifikasi Anjuran, Larangan dan Informasi pada Hadis Sahih Al-Bukhari,” e-Proceeding of Engineering, p. 4683, 2017.
A. K. S. A.-F. dan A. , “Klasifikasi Informasi, Anjuran dan Larangan pada Hadits Shahih Bukhari menggunakan Metode Support Vector Machine,” e-Proceeding of Engineering, p. 5014, 2017.
A. I. P. dan Adiwijaya, “On the Feature Selection and Classification Based on Information Gain for Document Sentiment Analysis,” Applied Computational Intelligence and Soft Computing, vol. 2018, p. 5, 2018.
M. Z. dan Z. H. Z. , “Multilabel neural networks with applications to functional genomics and text,” IEEE transactions on Knowledge and Data Engineering, pp. 1338-1351, 2006.
M. S. M. N. S. H. A. Reynaldi Ananda Pane, “A Multi-lable Classification on Topics of Quranic Verses in English Translation using Multinomial Naive Bayes,” 6th International Conference on Information and Communication Technology (ICoICT), 2018.
S. a. N. F. Nurcahyo, “Rainfall Prediction in Kemayoran Jakarta Using Hybrid Genetic Algorithm (GA) and Partially Connected Feedforward Neural Network (PCFNN),” Information and Communication Technology (ICoICT), pp. (pp. 166-171), 2014.
J. S. D. Raharjo, “Model Artificial Neural Network berbasis Particle Swarm Optimization untuk Prediksi Laju Inflasi,” Sistem Komputer, 2013.
H. N. A. H. S. M. S. dan N. S. , “Particle Swarm Optimization For Neural Network Learning Enchancement,” Jurnal Teknologi, pp. 13-26, 2008.
N. Alamsyah, Rancang Bangun Keamanan Brankas Menggunakan Radio Frequensy Identifikasi (RFID) Dengan Notifikasi Via SMS, 2020.
S. Aryza, Peningkatan Kualitas Sistem Pengaman Elektronik Menggunakan Smart Information Security, 2021.
P. Chandra, Pengaman Rumah Menggunakan Keypad dan RFID Dengan Panggilan dan SMS Telephone Seluler Berbasis Mikrokontroler, 2017.
B. Ginting, Peranan Aritmatika Modulo dan Bilangan Prima Pada Algoritma Kripto Grafi RSA, 2020.
H. Puspita , Pembuatan Alat Pengunci Elektronik Dengan Kombinasi Kode, 2021.
D. Riskiono, Rancang Bangun Sistem Pengunci Loker Otomatis Dengan Kendali Akses Menggunakan RFID SIM 800L, 2020.
S. Setyani, Rancang Bangun Alat Pengaman Brankas Menggunakan RFID Dengan Memanfaatkan E-KTP Sebagai Teks Berbasis Arduino, 2016.
R. Wahyuni, Alat Pengaman Pintu Dengan Password Menggunakan Arduino Atmega 328 dan Selenoid DoorLock, 2020.
C. Widianto, “Uji Validasi International Standard Of Serial Number (ISSN) Online atau E-ISSN Menggunakan Aritmatika Modulo,” Journal Kilat, 2019.
D. Widianto, Sistem Pengaman Pintu Rumah Otomatis Via SMS Berbasis Mikrokontroler 328, 2017.
I. C. Melalolin, “Rancang Bangun Brankas Pengaman Otomatis,” TELEKONTRAN, vol. 1, no. 1, p. 59, 2013.
H. R. A. R. S. A. Ath Thaareq Mahesa, “SISTEM KEAMANAN BRANKAS BERBASIS KARTU RFID E-KTP,” jurnal teknologi dan manageman informatika, vol. 5, no. 1, p. 1, 2019.
M. T. S. d. A. Goeritno, “Sistem Minimum Berbasis Mikrokontroler ATmega2560 sebagai Sistem Pengaman pada Analogi Lemari Penyimpanan Brankas,” Jurnal Rekayasa Elektrika, vol. 14, no. 3, p. 158, 2018.
E. M. Fakri Husni, “RANCANG BANGUN PENGAMAN BRANKAS MENGGUNAKAN RFID (RADIO FREQUENCY IDENTIFICATION), PIN DAN GPS BERBASIS ARDUINO MEGA DAN INTERNET OF THINGS (IOT),” Jurnal of Multidicsiplinary Research and Develepment, vol. 4, no. 2, pp. 45-54, 2022.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Security Sistem Pada Brankas dengan Metode Personal Identifikasi Number Berpola Aritmatika Modulo
Pages: 610-616
Copyright (c) 2022 Woro Agus Nurtiyanto, Perani Rosyani, Moch Koiru Ihksanudin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
