Sistem Bilik Steril Dengan Perangkat Mist Maker Dan Arduino Uno Menggunakan Metode Sekuensial Linier
-
Hadi Zakaria
*
Universitas Pamulang, Tangerang Selatan,
Indonesia
- Dedy Febiyanto Universitas Pamulang, Tangerang Selatan, Indonesia
- Perani Rosyani Universitas Pamulang, Tangerang Selatan, Indonesia (*) Corresponding Author
Abstract
Lintas Era Digital is a company engaged in the business of Technology Development as a School Vendor to work on various difficulties in schools within the scope of information technology such as Websites, Computer Based Test (CBT) Applications, Learning Management System (LMS) Applications and Electronic Cases, CCTV, Computers, laptops and procurement of tools for the prevention of Covid-19 that use electronic elements. The problem that is being faced by this company and from some current clients is the Covid-19 prevention tool that is still not in accordance with health protocols, there are still many shortcomings that are currently being faced, one of which is the Sterilization System using sterile booths automatically using a microcontroller. To overcome the problems above, it can be used a tool in the form of a microcontroller using several sensors such as a PIR Sensor (Passive Infrared Sensor) and using a Mist Maker tool (condensing device). The goal is to facilitate the performance of sterilization. In this study the author uses the C programming language.With a sterilization system using this microcontroller, it can help the community to find it easy to carry out health protocols. To be able to run this microcontroller, the author makes settings for the tool so that people can directly use the tool.
Downloads
References
E. Laelasari and T. Puspita, “DOI : https://doi.org/10.22435/jek.v19i1.3146 PELAKSANAAN DISINFEKSI DALAM PENCEGAHAN PENULARAN COVID- 19 DAN POTENSI RISIKO TERHADAP KESEHATAN DI INDONESIA Implementation of Disifection in Prevention of Covid-19 Transmission and Its Potential Health Risk,” pp. 1–20, 2020.
U. Hanifah Salsabila, L. Irna Sari, K. Haibati Lathif, A. Puji Lestari, and A. Ayuning, “Peran Teknologi Dalam Pembelajaran Di Masa Pandemi Covid-19,” Al-Mutharahah J. Penelit. dan Kaji. Sos. Keagamaan, vol. 17, no. 2, pp. 188–198, 2020.
N. Hamidah, D. Anung, T. Wijaya, W. Nuswantoro, and M. Santoso, “Desain Bilik Sterilisasi " White Box ",” vol. 17, no. 1, 2021.
S. M. Andriani, “Desain Sistem Otomasi Bilik Disinfektan Berbasis Arduino Uno,” vol. 3, no. 1, 2020.
U. B. Mikrokontroller, “Implementasi bilik ruangan disinfektan menggunakan sensor ultrasonik berbasis mikrokontroller 1,2,” pp. 21–27, 2019.
N. T. Siregar, U. Khair, and A. Budiman, “Rancang Bangun Alat Sterilisasi Penyemprotan Disinfektan Otomatis Untuk Barang Online Shop Berbasis Arduino Rancang Bangun Alat Sterilisasi Penyemprotan Disinfektan Otomatis Untuk Barang Online Shop Berbasis Arduino.”
D. Suprianto, P. N. Malang, V. Al, H. Firdaus, P. N. Malang, and R. Agustina, “Microcontroller Arduino Untuk Pemula ( Disertai Contoh-contoh Projek Menarik ),” no. September, 2019.
“No Title.”
A. Siskah, S. M. A. Rimba, and M. Bogor, “No Title,” vol. 4, no. November, pp. 71–84, 2019.
M. Saw and D. A. N. Topsis, “DECISION SUPPORT SYSTEM FOR SELECTION OF SAMPLE RESPONDENTS SOCIAL ECONOMIC SURVEY USING THE SAW AND TOPSIS METHOD IN THE STATISTIC AGENCY OF TANGERANG,” vol. 5, pp. 109–120, 2020.
M. Bolung, H. Ronald, and K. Tampangela, “Analisa penggunaan metodologi pengembangan perangkat lunak,” vol. 1, no. 1, pp. 1–10, 2017.
I. I. Permana, A. Arvianto, P. Studi, T. Industri, F. Teknik, and U. Diponegoro, “ANALISIS PREVENTIVE DAN CORRECTIVE MAINTENANCE LOADING ARM PADA PT . PERTAMINA TBBM SEMARANG,” 2016.
C. Pahl, “Adaptive development and maintenance of user-centric software systems,” pp. 1–18.
S. D. Pandi et al., “PERANCANGAN PREVENTIVE MAINTENANCE PADA MESIN CORRUGATING dan MESIN FLEXO di PT . SURINDO TEGUH GEMILANG,” vol. 13, no. 1, 2014.
A. Suyatno and D. M. Khairina, “PENDETEKSI GANGGUAN JARINGAN LOKAL MENGGUNAKAN METODE CERTAINTY FACTOR,” vol. 13, no. 2, pp. 60–64, 2018.
N. M. Astiti, “Analisa dan perancangan aplikasi pembelajaran matematika berbasis android,” Konf. Nas. Sist. dan Inform., pp. 982–991, 2015.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Bilik Steril Dengan Perangkat Mist Maker Dan Arduino Uno Menggunakan Metode Sekuensial Linier
Pages: 263−269
Copyright (c) 2022 Hadi Zakaria, Dedy Febiyanto, Perani Rosyani
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
