Prototype Alat Pemilah Sampah Organik, Logam, dan Non Logam Menggunakan Mikrokontroler Esp32
-
Riki Saputra
*
Universitas Mataram, Mataram,
Indonesia
- Syafaruddin Ch Universitas Mataram, Mataram, Indonesia
- Paniran Paniran Universitas Mataram, Mataram, Indonesia (*) Corresponding Author
Abstract
The issue of waste management has become increasingly important alongside the growth of population and public consumption. Improper disposal of waste types leads to environmental and health problems. To address this, it is necessary to develop technology that can aid in the efficient sorting of waste. This study aims to: first, design and build a waste sorter for organic, metal, and non-metal waste using the ESP32 microcontroller; and second, understand the operating system of the organic, metal, and non-metal waste sorting device. This research utilizes a design and implementation method for the waste sorter based on the ESP32 microcontroller. The device is equipped with capacitive and inductive proximity sensors to detect waste types, as well as a servo motor to direct waste into the appropriate collection bins. The results of this study indicate that: first, the designed waste sorter can sort waste into three categories: organic, metal, and non-metal. Second, the capacitive and inductive proximity sensors can effectively detect waste types at a range of 2-6 cm. Third, the servo motor can drive the sorting mechanism to direct waste to the appropriate collection bins. Fourth, this waste sorter can help improve efficiency and accuracy in waste management.
Downloads
References
M. A. K. Harahap, R. N. Wurarah, A. Fathurohman, A. Suroso, and Y. Iskandar, “Globalization substance and industrial revolution 4.0 and the role of technological innovation for economic development towards entrepreneurship,” Jurnal Bisnisman: Riset Bisnis Dan Manajemen, vol. 4, no. 3, pp. 37–51, 2023.
P. Netinant, T. Utsanok, M. Rukhiran, and S. Klongdee, “Development and Assessment of Internet of Things-Driven Smart Home Security and Automation with Voice Commands,” IoT, vol. 5, no. 1, pp. 79–99, 2024.
S. Feng, R. Zhang, and G. Li, “Environmental decentralization, digital finance and green technology innovation,” Structural Change and Economic Dynamics, vol. 61, pp. 70–83, 2022.
A. T. Hoang and X. P. Nguyen, “Integrating renewable sources into energy system for smart city as a sagacious strategy towards clean and sustainable process,” Journal of Cleaner Production, vol. 305, p. 127161, 2021.
J. M. Kadang and N. Sinaga, “Pengembangan Teknologi Konversi Sampah Untuk Efektifitas Pengolahan Sampah dan Energi Berkelanjutan,” TEKNIKA: Jurnal Ilmiah Bidang Ilmu Rekayasa, vol. 15, no. 1, pp. 33–44, 2021.
S. Andini, S. Saryono, A. N. Fazria, and H. Hasan, “Strategi pengolahan sampah dan penerapan zero waste di lingkungan kampus STKIP Kusuma Negara,” Jurnal Citizenship Virtues, vol. 2, no. 1, pp. 273–281, 2022.
B. Suwerda, “Bank Sampah (kajian teori dan penerapan),” Yogyakarta: Pustaka Rihama, vol. 22, p. 14, 2012.
G. K. Wijaya, “Perancangan Sistem Pemantauan Kapasitas Dan Alat Pemilah Sampah Berbasis Internet Of Things (IoT),” PhD Thesis, Univeristas Komputer Indonesia, 2021. Accessed: Nov. 06, 2024. [Online]. Available: https://elibrary.unikom.ac.id/id/eprint/5639/
Y. D. Mukin and P. Noviyanti, “Simulasi Jaringan Smart Home dengan Sistem Berbasis IoT,” Jurnal Komunikasi, Sains dan Teknologi, vol. 2, no. 1, pp. 159–168, 2023.
A. Ridwan, R. Wulandari, S. Sepriano, M. Fahrurrozi, R. Darpono, and L. P. I. Kharisma, Belajar Dasar Mikrokontroler Arduino: Teori & Praktek. PT. Sonpedia Publishing Indonesia, 2023. Accessed: Nov. 06, 2024. [Online]. Available: https://books.google.com/books?hl=en&lr=&id=FJvCEAAAQBAJ&oi=fnd&pg=PA49&dq=Arduino+adalah+platform+pengembangan+elektronik+yang+dapat+diprogram+untuk+mengontrol+perangkat-perangkat+fisik&ots=kVtc-ldAeZ&sig=NcVs-zpnBrEPbN34fx6DjrN5lIg
I. D. Rahman, M. A. Auliq, and S. Sutikno, “Prototype Alat Pemilah dan Penghancur Sampah Berbasis Mikrokontroler Arduino UNO R3 Sebagai Bahan Pupuk Organik,” Jurnal Teknik Elektro dan Komputasi (ELKOM), vol. 6, no. 2, pp. 245–254, 2024.
L. Nulhakim, “Pemilahan Jenis Sampah Logam Dan Non-Logam Skala Kecil Secara Otomatis Berbasis Arduino (Smart Trash Can),” Jurnal Teknologi Informasi dan Komunikasi, vol. 9, no. 2, 2020, Accessed: Nov. 12, 2024. [Online]. Available: http://jurnal.unnur.ac.id/index.php/jurnalfiki/article/view/363
I. G. M. N. Desnanjaya, I. K. B. Sandika, I. B. G. Sarasvananda, P. W. Aditama, and I. K. A. G. Wiguna, “Rancang Bangun Tempat Sampah Pintar Untuk Meningkatkkan Management Sampah Berbasis Mikrokontroler,” IJEIS (Indonesian Journal of Electronics and Instrumentation Systems), vol. 13, no. 2, pp. 207–216, 2023.
M. W. Arifandi, “Pengembangan Sistem Tempat Sampah Pintar Berbasis Internet Of Things (IOT),” PhD Thesis, Politeknik Negeri Ujung Pandang, 2020. Accessed: Nov. 06, 2024. [Online]. Available: http://repository.poliupg.ac.id/id/eprint/4849/
R. Hidayat, P. Pangaribuan, and M. H. Barri, “Sistem Monitoring Prototipe Pemilah Sampah Sungai Berbasis Sensor JSN-SR04T dan Internet of Things,” eProceedings of Engineering, vol. 11, no. 1, 2024, Accessed: Nov. 12, 2024. [Online]. Available: https://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/22245
M. M. Al Maududy, K. Mardianto, and A. Susanto, “Pemanfaatan Berbagai Sensor dalam Manajemen Perkebunan Kelapa Sawit,” Warta Pusat Penelitian Kelapa Sawit, vol. 26, no. 2, pp. 117–123, 2021.
G. M. S. B. Ginting and A. Hasibuan, “Analisis Big Data Informasi dalam Proses Manufaktur Industri 4.0,” Kohesi: Jurnal Sains dan Teknologi, vol. 2, no. 4, pp. 71–80, 2024.
E. Erwin et al., Pengantar & Penerapan Internet Of Things: Konsep Dasar & Penerapan IoT di berbagai Sektor. PT. Sonpedia Publishing Indonesia, 2023. Accessed: Nov. 06, 2024. [Online]. Available: https://books.google.com/books?hl=en&lr=&id=93_QEAAAQBAJ&oi=fnd&pg=PA11&dq=Efesiensi+sensor+sangat+lah+penting+saat+ini,+dengan+memakai+sensor,+sebuah+alat+dapat+memilah+suatu+benda+dengan+benda+lainya+dengan+sangat+cepat+dan+akurat,+sesuai+jenis+nya,+untuk+itulah+sensor+salah+satu+bagian+utama+dalam+sebuah+mesin+di+industry+manapun,+di+karenakan+fungsi+dan+ketepatan+nya+sangatlah+akurat,+dan+perawatan+nya+sangatlah+mudah,+sehingga+menjadi+salah+satu+energi+yang+ramah+lingkungan+dengan+tidak+banyak+memakan+tenaga+dan+perawatan+yang+besar+&ots=QWAr3zr62y&sig=RVhHOEDuRzmesXFyQU_01d8N3SA
E. C. Nugroho, A. R. Pamungkas, and I. P. Purbaningtyas, “Rancang Bangun Alat Pemilah Sampah Otomatis Berbasis Arduino Mega 2560,” Go Infotech: Jurnal Ilmiah STMIK AUB, vol. 24, no. 2, pp. 124–133, 2018.
S. I. Lubis, U. Khair, and I. Lubis, “Rancang Bangun Prototype Alat Pemilah Limbah Logam Dan Plastik Otomatis Berbasis Arduino Uno,” ALGORITMA: Jurnal Ilmu Komputer Dan Informatika, vol. 5, no. 2, 2021, Accessed: Nov. 26, 2024. [Online]. Available: https://jurnal.uinsu.ac.id/index.php/algoritma/article/view/11465
M. Akbar, S. D. Anjasmara, and K. D. K. Wardhani, “Rancang Bangun Alat Pendeteksi Sampah Organik dan Anorganik Menggunakan Sensor Proximity dan NodeMCU ESP8266,” Jurnal Komputer Terapan, vol. 7, no. 2, pp. 290–299, 2021.
Y. Gessel, S. Bahri, and I. Nirmala, “Sistem Pemilah Menggunakan Conveyor dan Pemantauan Ketinggian Sampah Logam, Anorganik, dan Organik Berbasis Internet of Things,” Journal of Computer System and Informatics (JoSYC), vol. 4, no. 4, pp. 965–975, 2023.
M. Marsujitullah and D. A. Kaligis, “Implementasi Tempat Sampah Otomatis Berbasis Internet of Things Pada Pantai Waninggap Nanggo Sebagai Destinasi Wisata Pantai,” Musamus Devotion Journal, vol. 5, no. 2, pp. 52–65, 2023.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Prototype Alat Pemilah Sampah Organik, Logam, dan Non Logam Menggunakan Mikrokontroler Esp32
Pages: 46-54
Copyright (c) 2024 Riki Saputra, Syafaruddin Ch, Paniran Paniran
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
