Perancangan dan Implementasi Sistem Keamanan Pada Brankas Menggunakan Paralel Fingerprint dan Keypad Berbasis Arduino
-
Muhammad Roid Al Rafif
*
Universitas Mataram, Mataram,
Indonesia
- Paniran Paniran Universitas Mataram, Mataram, Indonesia
- Giri Wahyu Wiriasto Universitas Mataram, Mataram, Indonesia (*) Corresponding Author
Abstract
Safe security plays an important role in protecting valuable assets from unauthorized access. Designing and implementing a security system on a safe using a parallel combination of two fingerprint sensors and a keypad. This is to increase the level of security by ensuring that both fingerprint sensors verify the fingerprint simultaneously before the user enters the code via the keypad to open the safe. The system controller uses an Arduino Mega as the main microcontroller, which connects two fingerprint sensors, a 4x4 keypad, a 16x2 LCD to display information, a 1 channel relay to drive the solenoid door lock as an actuator, and a buzzer as a warning indicator. The system testing scenario consists of three stages, namely, Electronic relay testing is carried out to ensure that the relay functions properly in controlling the solenoid door lock, so that the locking and opening mechanisms of the safe can run according to command. Testing on parallel fingerprints aims to evaluate the accuracy and speed of the sensor in reading two fingerprints simultaneously and ensuring that only registered fingerprints can access the system. Furthermore, keypad testing is carried out to verify the accuracy in reading the access code and testing the warning system in the event of an input error or unauthorized access attempt. The implementation results show that the system has a fingerprint authentication success rate of 98%, with an average response time of 1.2 seconds. The keypad reading accuracy reaches 99%, while the safe locking and opening mechanism functions with a 100% success rate. With these results, the developed system is proven to work reliably and provide additional protection compared to conventional methods.
Downloads
References
A. Riawan dan N. Hamidah, "Pengembangan Sistem Keamanan Berbasis IoT," Jurnal Teknologi dan Keamanan, vol. 5, no. 2, hlm. 45-53, 2020.
I. G. A. Putra dan A. Wijaya, "Implementasi Sistem Keamanan Brankas Berbasis Biometrik," Jurnal Rekayasa Elektronika, vol. 8, no. 1, hlm. 15-22, 2021.
L. Zhao dan Y. Wang, "Smart Safe Security System with Fingerprint and Keypad Using Arduino," International Journal of Engineering Research, vol. 10, no. 4, hlm. 112-118, 2021.
R. Prabowo dan D. Setiawan, "Rancang Bangun Sistem Keamanan Brankas dengan Arduino," Jurnal Teknik Elektro, vol. 9, no. 3, hlm. 88-95, 2022.
T. Hidayat, "Inovasi Teknologi Keamanan Berbasis Mikrokontroler," Jurnal Inovasi Teknologi, vol. 11, no. 1, hlm. 56-64, 2023.
J. Manurung dan B. Fernandes, "Alat keamanan brankas perhiasan dengan face recognition dan fingerprint berbasis Arduino Mega 2560 terkendali smartphone," Jurnal Sains Informatika Terapan, vol. 2, no. 3, hlm. 90-95, 2023.
F. H. Ramdhani, "Prototype sistem keamanan brankas berbasis Arduino menggunakan RFID, PIN, GPS, dan pengontrol suhu," Doktoral, Fakultas Teknik dan Ilmu Komputer Teknik Mesin, 2023.
S. Salsabilla, L. L. Toya, O. Ocsirendi, dan E. Sulistyo, "Sistem keamanan brankas dengan security ganda menggunakan face recognition dan RFID," dalam Prosiding Seminar Nasional Inovasi Teknologi Terapan, vol. 4, no. 01, hlm. 27-32, Juni 2024.
S. N. Safaati, "Implementasi sistem keamanan pada ruangan dan brankas dengan notifikasi Telegram berbasis IoT," 2024.
P. Setiawan, R. A. Funny, dan A. L. da Silva, "Rancang bangun prototipe pengunci brankas menggunakan modifikasi kartu tanda penduduk dengan RFID berbasis NodeMCU ESP 8266," TNI Angkatan Udara, vol. 3, no. 1, 2024.
R. Ahmad dan T. Wijaya, "Pengembangan Sistem Keamanan Brankas Berbasis Biometrik dan Kode Digital Menggunakan Arduino Uno," Jurnal Teknologi dan Sistem Komputer, vol. 8, no. 2, hlm. 45-52, 2020.
R. Yudha dan M. Putra, "Penggunaan Keypad dan Relay pada Sistem Keamanan Berbasis Arduino Mega," Prosiding Seminar Nasional Teknologi dan Informasi, vol. 13, no. 4, hlm. 65-72, 2021.
D. Kusnadi dan F. Prasetya, "Penggunaan Sensor Fingerprint untuk Sistem Keamanan pada Brankas dengan Arduino Uno," Seminar Nasional Teknologi dan Rekayasa, vol. 12, no. 2, hlm. 45-50, 2021.
D. Rachmawati dan D. P. Sari, "Rancang Bangun Sistem Pengaman Pintu Brankas Berbasis Arduino Mega dengan Sensor Fingerprint dan Keypad 4x4," Jurnal Teknik Elektro, vol. 17, no. 2, hlm. 123-134, 2023.
A. Prasetyo dan S. Nugroho, "Sistem Keamanan Brankas Berbasis Arduino Menggunakan Sensor Fingerprint dan Keypad 4x4," Jurnal Teknologi dan Rekayasa, vol. 14, no. 3, hlm. 201-210, 2022.
A. Suryanto dan R. Hidayat, "Implementasi Sistem Keamanan Brankas dengan Sensor Fingerprint dan Keypad 4x4 Berbasis Arduino Mega," Jurnal Teknik Elektro Universitas Muhammadiyah Surakarta, vol. 15, no. 1, hlm. 123-134, 2021.
A. Wibowo dan B. Santoso, "Sistem Keamanan Brankas Berbasis Arduino Menggunakan Sensor Fingerprint dan Keypad 4x4," Jurnal Teknik Elektro Universitas Politeknik Negeri Bangka Belitung, vol. 10, no. 1, hlm. 67-72, 2020.
F. Rizki dan E. Setiawan, "Penerapan Sistem Keamanan Berbasis RFID dan Fingerprint untuk Pengendalian Akses Brankas," Jurnal Ilmiah Teknik Elektro, vol. 18, no. 4, hlm. 204-211, 2021.
R. Hidayat dan A. Suryanto, "Rancang Bangun Sistem Keamanan Brankas Berbasis Arduino Mega dengan Sensor Fingerprint dan Keypad 4x4," Jurnal Teknik Elektro Universitas Muhammadiyah Surakarta, vol. 16, no. 1, hlm. 45-50, 2021.
S. Nugroho dan A. Prasetyo, "Sistem Keamanan Brankas Berbasis Arduino Menggunakan Sensor Fingerprint dan Keypad 4x4," Jurnal Teknologi dan Rekayasa, vol. 15, no. 1, hlm. 201-210, 2022.
A. Pratama dan M. Yusuf, "Penerapan Sistem Keamanan Brankas Menggunakan Arduino dan Sensor Sidik Jari," Seminar Nasional Teknologi dan Rekayasa, vol. 14, no. 2, hlm. 215-221, 2021.
D. Gunawan dan D. Widyantoro, "Design and Implementation of Security System Using Fingerprint and Keypad," Journal of Electrical Engineering and Technology, vol. 15, no. 4, hlm. 322-328, 2020.
R. Supriyadi dan S. Prasetyo, "Implementasi Sistem Keamanan Brankas Menggunakan Fingerprint dan Keypad Berbasis Arduino," Jurnal Teknik Elektro, vol. 15, no. 2, hlm. 101-110, 2020.
P. Gopi dan M. Muniappan, "Security Systems Based on Biometric and Password Authentication for Access Control," Journal of Advanced Security Technologies, vol. 22, no. 3, hlm. 160-171, 2021.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Perancangan dan Implementasi Sistem Keamanan Pada Brankas Menggunakan Paralel Fingerprint dan Keypad Berbasis Arduino
Pages: 1733-1740
Copyright (c) 2025 Muhammad Roid Al Rafif, Paniran Paniran, Giri Wahyu Wiriasto
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
