Prototipe Smart Mosque System Untuk Persiapan Sarana Sebelum Waktu Shalat Berbasis IoT
Abstract
The advancement of technology in the modern era has driven the development of innovations that facilitate human activities, one of which is through the concept of the Internet of Things (IoT). This research aims to develop a smart mosque prototype based on IoT to prepare facilities before prayer times. The issue faced by several mosques is the lack of a permanent caretaker, which often leads to delays in preparing for worship, such as filling the ablution water or playing the Quran recitation before the call to prayer, as well as the management of facilities like lighting and fans that are not well controlled. The proposed solution in this research utilizes the NodeMCU ESP32 microcontroller, an ultrasonic sensor to detect the water tank capacity to ensure water is available, a DFPlayer Mini to automatically play the Quran recitation before the call to prayer, the MyQur’an API to retrieve prayer times, and the NTP (Network Time Protocol) server to synchronize the system time accurately. Additionally, the Blynk application is used to control the facilities within the mosque. Based on the test results, this prototype system demonstrates good performance in controlling mosque facilities, automatic water filling, and timely Quran recitation playback. However, in the automatic water filling, there is a limitation regarding the high filling threshold, where water overflows at 90% and 95% levels. The DS1307 RTC system has also proven capable of synchronizing time accurately with the prayer schedule from the MyQur’an API, with minimal time difference.
Downloads
References
Nurhidayati; Indrajit, Internet of Things (IoT): Mengubah Wajah Pendidikan Indonesia. 2020.
I. Gunawan, T. Akbar, and M. Giyandhi Ilham, “Prototipe Penerapan Internet Of Things (Iot) Pada Monitoring Level Air Tandon Menggunakan Nodemcu Esp8266 Dan Blynk,” Infotek J. Inform. dan Teknol., vol. 3, no. 1, pp. 1–7, 2020, doi: 10.29408/jit.v3i1.1789.
R. Mubarok, “Peran Takmir Masjid dalam Pelaksanaan Pendidikan Islam di Masjid Darus Sakinah Sangatta Utara,” (Jurnal Pendidik. Islam., vol. Vol. 18, no. 2, p. 237, 2020, doi: 10.35905/alishlah.v18i2.1576.
A. M. Simorangkir, Azanuddin, and P. S. Ramadhan, “Smart Mosque System Untuk Persiapan Sarana Sebelum Waktu Sholat Berbasis Mikrokontroler Menggunakan Teknik Duplex,” J. CyberTech, vol. 4, no. 7, pp. 1–11, 2021, doi: 10.53513/jct.v4i7.4164.
H. Santoso, B. Ramadana, and B. Airlangga, “PENGELOLAAN FASILITAS DI RUANG UTAMA MASJID AL FALAH SURABAYA,” J. Ilm. Stidki Ar-Rahmah, vol. 3, no. 1, pp. 41–51, 2020, doi: 10.52833/masjiduna.v3i1.62.
P. A. Topan, D. Fardila, S. A. Rohman, and S. Bahri, “PEMANFAATAN TEKNOLOGI ARDUINO DAN DFPLAYER MINI UNTUK PERANGKAT PEMUTAR AUDIO DI MASJID RAUDHATUL JANNAH DESA GONTAR, KABUPATEN SUMBAWA, NUSA TENGGARA BARAT,” J. Abdi Insa., vol. 9, pp. 1797–1807, 2022, doi: 10.29303/abdiinsani.v9i4.829.
Alimin, P. Ali Topan, S. Bahri, and D. Fardila, “Implementasi Modul Dfplayer Mini Mp3 Untuk Mempermudah Pemutaran Audio Surah Al-Quran Di Masjid Al-Kahfi Universitas Teknologi Sumbawa,” JMM (Jurnal Masy. Mandiri), vol. 8, no. 3, pp. 3140–3148, 2024, doi: 10.31764/jmm.v8i3.23402.
A. Fachreza and U. Budiyanto, “Prototipe Sistem Otomatisasi Kendali Masjid Via Telegram Menggunakan Mikrokontroler ESP32 Sensor Cahaya Dan Suhu,” Semin. Nas. Mhs. Fak. Teknol. Inf. Jakarta-Indonesia, no. September, pp. 924–931, 2022.
A. Herlina, M. I. Syahbana, M. A. Gunawan, and M. M. Rizqi, “Sistem Kendali Lampu Berbasis Iot Menggunakan Aplikasi Blynk 2.0 Dengan Modul Nodemcu Esp8266,” INSANtek, vol. 3, no. 2, pp. 61–66, 2022, doi: 10.31294/instk.v3i2.1532.
I. Z. L. Winarto, N. Kholis, and Lilik Anifah, “Rancang Bangun Purwarupa Aplikasi Masjid Pintar Menggunakan Platform Kodular Berbasis Internet di Masjid,” Impr. J. Teknol. dan Inf., vol. 2, no. 2, pp. 61–71, 2023, doi: 10.59086/jti.v2i2.288.
N. Renaningtias and D. Apriliani, “Penerapan Metode Prototype Pada Pengembangan Sistem Informasi Tugas Akhir Mahasiswa,” Rekursif J. Inform., vol. 9, no. 1, 2021, doi: 10.33369/rekursif.v9i1.15772.
W. W. Anggoro and I. R. Widiasari, “The Perancangan dan Penerapan Kendali Lampu Ruangan Berbasis IoT (Internet of Things) Android,” JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 8, no. 3, pp. 1596–1606, 2021, doi: 10.35957/jatisi.v8i3.1311.
A. W. Putra, R. Nuryanto, and A. Tafrikhatin, “Fitur Pengingat Kegiatan Masjid Dengan Kontrol Wi-Fi Berbasis ESP-32 Pada Jam Digital,” J. Pendidik. Tambusai, vol. 5, no. 3, pp. 6177–6187, 2021, doi: 10.31004/jptam.v5i3.1928.
D. Sasmoko, Arduino dan Sensor pada Project Arduino DIY. 2021.
V. Yuliaminuddin, Krismes, and J. Bintoro, “Prototipe Sistem Kontrol Dan Monitoring Pada Tangki Air Berbasis Internet of Things,” Autocracy J. Otomasi, Kendali, dan Apl. Ind., vol. 7, no. 1, pp. 27–34, 2021, doi: 10.21009/autocracy.071.5.
I. Khairunnisa and A. Hutasuhut, “Prototype Smart Alarm Automated System Berbasis DFPlayer Mini untuk Mengefisiensikan Jadwal Waktu,” J. Tek. Inform. Stmik Antar Bangsa, vol. 9 No.2, no. 2, pp. 34–41, 2023, doi: 10.51998/jti.v9i2.542.
S. Amri, W. M. Faizal, A. Azizul, P. Almubarak, and N. Azima, “Implementasi Jadwal Shalat Digital Dengan Menggunakan Running Text Di Mushalla Kampus Politeknik Negeri Bengkalis,” Tanjak J. Pengabdi. Kpd. Masy., vol. 5, no. 1, pp. 101–106, 2024, doi: 10.35314/tanjak.v5i1.4152.
Suhardi, R. Hidayati, and I. Nirmala, “Smart Lamp: Kendali dan Monitor lampu Berbasis Internet Of Things,” J. Jupiter, vol. 14, no. 2, pp. 507–515, 2022, doi: 10.58918/lofian.v4i1.255.
D. Saputra and V. Arinal, “Perancangan Home Automation dalam Mengontrol Lampu dan Kipas Menggunakan Blynk Berbasis NodeMCU,” J. Sos. Teknol., vol. 1, no. 7, pp. 597–606, 2021, doi: 10.59188/jurnalsostech.v1i7.133.
S. Rosad and D. Alfaji, “Penerapan Papan Informasi Digital Secara Real Time Menggunakan Network Time Protocol Berbasis Website,” JATI (Jurnal Mhs. Tek. Inform., vol. 8, no. 2, pp. 2000–2005, 2024, doi: 10.36040/jati.v8i2.7947.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Prototipe Smart Mosque System Untuk Persiapan Sarana Sebelum Waktu Shalat Berbasis IoT
Pages: 649-657
Copyright (c) 2024 Achmad Evin Kafrawi, Syafaruddin Ch, Bulkis Kanata

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).