Sistem Kendali Otomatisasi Suhu Kelembaban dan Pencahayaan Pada Terrarium Berbasis Internet of Things
Abstract
Terrarium is one of the interesting and environmentally friendly room decorative solutions. However, the owner must be more careful to pay attention to the optimal humidity and light conditions for the terrarium. In an effort to overcome these obstacles, this research makes an Internet of Things (IoT)-based automation control system for terrarium watering and lighting. The system is equipped with a humidity sensor (DHT22) and a light intensity sensor (Light Dependent Resistor) to detect environmental conditions. When abnormal humidity is detected, the system will automatically water the plants, while the lights will be adjusted to the light intensity of the room. In addition, the system data is presented in real-time through the website and displayed on the LCD screen. The test results show the accuracy rate of the humidity sensor is 97.45% and the light intensity sensor is 98.51%, while the ultrasonic proximity sensor has an average accuracy of about 98.61%. This research offers a practical solution for maintaining terrariums efficiently and effectively through the application of IoT technology.
Downloads
References
A. Wulandari dkk., “Pemberdayaaan Kompetensi Guru melalui Pembuatan Media Terrarium dengan Pendekatan Community Base Research,” vol. 2, no. 2, hlm. 224–232, 2022.
M. Azizah, K. M. Handayani, I. F. Azhari, dan W. L. “Pemberdayaan Masyarakat Desa Hargomulyo Melalui Pembuatan Terarium Art Souvenir”, Yuhanna, Jurnal Abdimas Budi Darma, hlm. 123-129, 2018.
S. A. Ali dan K. V. Meitei, “Nigella sativa seed extract and its bioactive compound thymoquinone: The new melanogens causing hyperpigmentation in the wall lizard melanophores,” Journal of Pharmacy and Pharmacology, vol. 63, no. 5, hlm. 741–746, Mei 2019, doi: 10.1111/j.2042- 7158.2011.01271.x.
Putri dan M. Susan, “Monitoring Lumut Daun di Zona Tropik Kawasan Gunung selamet, Jawa Tengah,” BIOMA jurnal, vol. 15, hlm. 76–82, 2020.
R. Rangga, dan L. Luluka, “Pemantauan Struktur Tanah Pada Lahan Gambut Dengan Menggunakan Teknik Hidro Lumut Daun dan Bahan Pembenah Tanah,” Bioma Jurnal, vol. 1, no. 2, hlm. 214–232 2019.
R. dan Z. Z. Samuel Yohendri, “Inventarisasi Lumut Daun (Kelas Musci) di Kecamatan Entikong Kabupaten Sanggau Kalimantan Barat,” JOURNAL of Biotechnology and Conservation in WALLACEA, vol. 01, hlm. 42–56, 2021.
Putra Wawan, “Identifikasi Dan Monitoring Isopoda Pada Pegunungan Klaten,” Universitas Airlangga, Kediri Jawa Timur, vol. 1, no. 2, hlm. 222–242, 2021.
R. Citraning dkk., “Observasi Hewan Invertebrata di Pantai Bandengan Jepara,” Universitas Kendiri,2020.
K. Hewan Arthropoda Pada, G. Dan Peranannya Terhadap Lingkungan Sekitar, K. Nur Afifah, A. Susatyo Nugroho, dan M. Anas Dzaki, “Keanekaragaman Hewan Artropoda Pada Area Persawahan di Desa Batur Agung Gubug Grogoban dan Peranannya Terhadap Lingkungan Sekitar,” Jurnal Ilmiah Sains, vol. 27, no. 1, hlm. 76, 2023.
P. Leu, O. Naharia, E. M. Moko, A. Yalindua, dan J. Ngangi, “Karakter Morfologi dan Identifikasi Hama pada Tanaman Dalugha (Cyrtosperma merkusii (Hassk.) Schott) di Kabupaten Kepulauan Talaud Propinsi Sulawesi Utara,” JURNAL ILMIAH SAINS, vol. 21, no. 1, hlm. 96, Apr 2021.
R. C. Rachmawati dkk., “Inventarisasi Kelimpahan Molusca di Pantai Teluk Awur Jepara,” Universitas PGRI Semarang, vol. 1, no. 1, 2022.
A. Vu dan S. P. Brown, “Plants and Youth: Designing and Building a Terrarium 1,” Jurnal Ilmiah Sains, vol. 12, no. 1, hlm. 76, 2023.
Muhammad Faiz Muna, “Perancangan dan Impelementasi Pengatur Suhu Terrarium Serta Pemberi Pakan Terjadwal Pada Hewan Reptil Menggunakan Arduino Berbasis Interner of Things,” Program Studi S-1 Teknik Elektro Fakultas Teknologi Informasi dan Elektro, 2019.
Stanciu, R. Bogdan, dan M. Marcu, “Ideas with no History of Application in Education and Technology View project Academy View project Developing a low-cost Smart Terrarium in the Context of Home Automation Applications,” 2020.
Arslimulyadi, “Prototipe Suobium Sebagai Kendali Otomatis Suhu Kelembaban Bioactive Terrarium Berbasis IoT.” Program Studi S-1 Teknik Elektro Fakultas Teknologi Informasi dan Elektro, 2020.
A. Sanaris dan I. Suharjo, “Prototype Alat Kendali Otomatis Penjemur Pakaian Menggunakan NodeMCU ESP32 Dan Telegram Bot Berbasis Internet of Things (IOT) Prototype Automatic Drying Tool Using NodeMCU ESP32 and Telegram Bot Based on Internet of Things (IOT),” Gejayan, 2020.
A. A. M. Khalifa dan K. Prawiroredjo, “Model Sistem Pengendalian Suhu dan Kelembaban Ruangan Produksi Obat Berbasis NodeMCU ESP32,” Jurnal ELTIKOM, vol. 6, no. 1, hlm. 13– 25, Jan 2022,
A. R. S. Fenny Vinola, “Sistem Monitoring dan Controlling Suhu Ruangan Berbasis Internet of Things,” Jurnal Teknik Elektro dan Komputer, vol. 09, hlm. 117–126, 2020.
A. K. Tsauqi dkk., “Saklar Otomatis Berbasis Light Dependent Resistor (LDR) Pada Mikrokontroler Arduino UNO,” Universitas Negeri Jakarta, 2016, hlm. SNF2016-CIP-19-SNF2016-CIP-24, 2020 doi: 10.21009/0305020105.
M. Fajar Wicaksono, “Implemtasi Modul Wifi NODEMCU ESP8266 Untuk Smart Home,” Program Studi S-1 Elektro Universitas Negeri Jakarta, 2020.
M. S. Yoski dan R. Mukhaiyar, “Prototipe Robot Pembersih Lantai Berbasis Mikrokontroller dengan Sensor Ultrasonik,” Program Studi S-1 Elektro Universitas Negeri Semarang 2020.
Mardiyansyah, dan A. Nurkholis, “Sistem Pengontrol Irigasi Otomais Menggunakan Mikrokontroler Arduino UNO,” Program Studi S-1 Informatika Universitas Negeri Jakarta 2020.
A. D. Hendra Saptadi Sekolah Tinggi Teknologi Telematika Telkom Purwokerto Jl I Panjaitan No, “Perbandingan Akurasi Pengukuran Suhu dan Kelembaban Antara Sensor DHT11 dan DHT22 Studi Komparatif pada Platform ATMEL AVR dan Arduino,” 2020.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Kendali Otomatisasi Suhu Kelembaban dan Pencahayaan Pada Terrarium Berbasis Internet of Things
Pages: 1516-1524
Copyright (c) 2024 Qano Triez Yoastha, Irma Nirmala, Suhardi Suhardi

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).






















