Pemanfaatan Internet of Things (IoT) Untuk Sistem Kendali dan Otomatisasi Pemeliharaan Bibit Ikan Lele
-
Muhammad Syahrul Kaffi
*
Universitas Tanjungpura, Pontianak,
Indonesia
- Rahmi Hidayati Universitas Tanjungpura, Pontianak, Indonesia
- Suhardi Suhardi Universitas Tanjungpura, Pontianak, Indonesia (*) Corresponding Author
Abstract
Catfish farming is one of the fisheries businesses that requires intensive attention to various environmental factors such as water quality, weather conditions, and feeding schedules so that productivity remains optimal. These conditions if not managed properly can cause a decrease in water quality which results in fish death or growth that is not maximized. To overcome these problems, an automatic control system based on the Internet of Things (IoT) was developed by utilizing the Arduino Uno microcontroller and ESP32 as the main components in the system. The system is equipped with various sensors, such as a pH sensor to monitor water acidity, an ultrasonic sensor to measure water depth, and a rain sensor to detect weather changes. In addition, the system is also equipped with relays, water pumps, and servos that function to regulate water conditions, automatic feeding, and automatic roof operations on fish ponds. This research was tested 72 times with different values of pH and ultrasonic sensor accuracy. The test results show that this system works without errors, with the pH sensor accuracy level reaching 89% and the ultrasonic sensor at 97%. With this automation system, it is hoped that catfish farmers can manage ponds more efficiently, monitor pond conditions in real-time, and increase cultivation productivity through the management of fish ponds.
Downloads
References
Nurhidayat, “PENGENDALIAN KUALITAS AIR PADA BUDIDAYA IKAN LELE JENIS MUTIARA,” Jurnal Ilmiah Mahasiswa Kendali dan Listrik, vol. 1, no. 2, pp. 42–50, 2020, doi: 10.33365/jimel.v1i1.
Amar. dkk, “PENINGKATAN PENGETAHUAN DAN KETERAMPILAN MASYARAKAT TENTANG PENGOLAHAN HASIL BUDIDAYA IKAN LELE MELALUI DIVERSIFIKASI PADA OLAHAN IKAN LELE,” JMM (Jurnal Masyarakat Mandiri), vol. 6, no. 2, p. 1340, Apr. 2022, doi: 10.31764/jmm.v6i2.7204.
T. Widodo, A. Bayu Santoso, S. Ihsani Ishak, and R. Rumeon, “JEPIN (Jurnal Edukasi dan Penelitian Informatika) Sistem Kendali Proporsional Kualitas Air berupa Ph dan Suhu pada Budidaya Ikan Lele Berbasis IoT,” 2023.
Fahmi & Natalia., “Sistem Pemantauan Kualitas Air Budidaya Ikan Lele Menggunakan Teknologi IoT,” vol. 4, pp. 1243–1248, 2020, doi: 10.30865/mib.v4i4.2486.
Suhartono. dkk, “Penerapan Internet of Thing (IoT) Dalam Pengendalian Suhu, Kelembaban dan PH Air Kolam pada Mini EduFarm,” Journal of Information System Research (JOSH), vol. 4, no. 4, pp. 1237–1244, Jul. 2023, doi: 10.47065/josh.v4i4.3723.
Islam.N., “RANCANG BANGUN SISTEM OTOMATISASI MONITORING KOLAM IKAN LELE DENGAN MEMPERHATIKAN SUHU DAN DERAJAT KEASAMAN (pH) BERBASIS INTERNET OF THINGS,” 2021.
Prabowo. dkk, “SISTEM MONITORING DAN PEMBERIAN PAKAN OTOMATIS PADA BUDIDAYA IKAN MENGGUNAKAN WEMOS DENGAN KONSEP INTERNET OF THINGS (IoT),” JURNAL DIGIT, vol. 10, no. 2, pp. 185–195, 2020.
L. E. Berampu, E. Patriono, and R. Amalia, “Pemberian Kombinasi Maggot (Hermetia illucens) dan Pakan Komersial untuk Efektifias Pemberian Pakan Tambahan Benih Ikan Lele Sangkuriang (Clarias gariepinus) oleh Kelompok Pembudidaya Ikan Lele,” 2021.
A. M. Hendri, H. Zarory, and A. Faizal, “Alat Monitoring Kadar Amonia dan Pengontrolan pH pada Kolam Ikan Lele Berbasis IoT,” BRILIANT: Jurnal Riset dan Konseptual, vol. 8, no. 1, Feb. 2023, doi: 10.28926/briliant.v8i1.
Khairuddin.F. dkk., “Pengaruh Kualitas Air Terhadap Produksi Ikan Lele Dumbo (Clarias gariepinus),” Pubmedia Jurnal Biologi, no. 1, pp. 1–8, 2023, doi: 10.47134/biology.v1i1.193.
Pulungan dkk, “Budidaya Ikan Lele Sangkuriang,” Best Journal (Biology Education Scince & Technology), vol. vol 6, pp. 08–14, 2023.
Puspita.R., “PENGEMBANGAN PROTOTIPE APLIKASI COMMUNITY,” 2020.
S. Soedewi, A. Mustikawan, and W. Swasty, “Penerapan Metode Design Thinking Pada Perancangan Website UMKM Kirihuci,” Apr. 2022.
dkk. Yulhendri, “Pengukuran Dan Pendataan Zat Cair Toluene Dengan Akses Rfid Berbasis Nodemcu Esp8266 Yang Termonitor Melalui Web,” vol. 2, no. 3, 2022, [Online]. Available: https://adaindonesia.or.id/journal/index.php/sintamai
dkk. Hidayat, “Pemrograman Mesin Smart Bartender Menggunakan Software Arduino IDE Berbasis Microcontroller ATmega2560,” vol. 6, 2021.
Darmawan.y., “RANCANG BANGUN ALAT HAND SANITIZER OTOMATIS MENGGUNAKAN ESP32 SENSOR INFRARED PROXIMITY DENGAN TAMPILAN MENARIK BAGI ANAK,” POLITEHNIK HARAPAN BERSAMA TEGAL, TEGAL, 2021.
Y. Rahmanto, A. Rifaini, S. Samsugi, and S. Dadi Riskiono, “SISTEM MONITORING PH AIR PADA AQUAPONIK MENGGUNAKAN MIKROKONTROLER ARDUINO UNO,” 2020.
Bunardi & Bachri, “Perancangan dan Implementasi Wiper Otomatis pada Helm Berbasis Mikrokontroler,” JAKARTA, 2022.
Mulyono.M.A., “SIMULASI ALAT PENJARING IKAN OTOMATIS DENGAN PENGGERAK MOTOR SERVO CONTINUOUS, SENSOR JARAK HC SR04 DAN TOMBOL, MENGGUNAKAN ARDUINO MEGA,” Semarang, May 2019.
Widharma.G.S., “Sensor Ultrasonik dalam Water Level Controller,” 2020.
Vecky.C., “Rancang Bangun Sistem Kendali Pompa Air Bersih Bertenaga Surya Di Kawasan Relokasi Korban Banjir Pandu,” 2020.
I. G. H. Putrawan, P. Rahardjo, and I. G. A. P. R. Agung, “Sistem Monitoring Tingkat Kekeruhan Air dan Pemberi Pakan Otomatis pada Kolam Budidaya Ikan Koi Berbasis NodeMCU,” Majalah Ilmiah Teknologi Elektro, vol. 19, no. 1, p. 1, Oct. 2019, doi: 10.24843/mite.2020.v19i01.p01.
N. S. dan Y. Madinawati, “PEMBERIAN PAKAN YANG BERBEDA TERHADAP PERTUMBUHAN DAN KELANGSUNGAN HIDUP BENIH IKAN LELE DUMBO (Clarias gariepinus),” Media Litbang Sulteng IV, vol. 2, pp. 83–87, Dec. 2011.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Pemanfaatan Internet of Things (IoT) Untuk Sistem Kendali dan Otomatisasi Pemeliharaan Bibit Ikan Lele
Pages: 714-722
Copyright (c) 2024 Muhammad Syahrul Kaffi, Rahmi Hidayati, Suhardi Suhardi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
