Perancangan Prototype Pelampung Keselamatan Elektrik dengan Algoritma Proportional Integral Derivative Untuk Kestabilan di Air
Abstract
This research addresses the need for a water rescue device capable of autonomously moving towards a survival position while being remotely controlled. The main problem investigated is how to design an electric safety buoy that can move stably in currents and waves while being operated remotely using Internet of Things (IoT) technology. Data were collected through prototype testing under various load and control range conditions. The research method involves designing and implementing a control system based on the Arduino Uno microcontroller, with a Proportional-Integral-Derivative (PID) algorithm to maintain buoy stability, and an RF communication module for remote control up to 500 meters. The test results show that the buoy can achieve an average speed of 1.35 m/s at 100% throttle with an 80 kg load and maintain stability in various water conditions. The standard deviation of speed indicates minimal variation between tests, demonstrating good movement stability. This research contributes to the development of IoT-based safety devices, enhancing the effectiveness of water rescue operations. With the use of a PID algorithm, the buoy can automatically adjust direction and speed, making it more responsive to remote control commands and able to withstand dynamic water conditions.
Downloads
References
M. Albana, R. Riantini, and I. Munadhif, “PERANCANGAN DAN PEMBUATAN PROTOTYPE REMOTE CONTROL BUOYS BERTENAGA BATERAI DENGAN AKUATOR PROPELLER,” 2018.
D. Ahmad, A. Fauyan, E. Sonalitha, and R. H. Romadhon, “Perancangan dan Optimasi Sistem Kendali PID Pada Drone FPV Dengan Menggunakan Betaflight Untuk Manuver Terbang,” 2022. [Online]. Available: https://semnasti.unipasby.ac.id/proceedings/
“Implementasi Pengendali PID Untuk Kestabilan Posisi Terbang Wahana Tanpa Awak,” 2018.
E. H. Muktafin, K. Kusrini, and E. T. Luthfi, “Analisis Sistem Kendali Robot USMAN untuk Sterilisasi Lantai Masjid dengan Algoritma Proportional Integral Derivative,” Jurnal Eksplora Informatika, vol. 10, no. 2, pp. 80–91, Mar. 2021, doi: 10.30864/eksplora.v10i2.468.
M. E. Santoso, M. Ulum, and A. F. Ibadillah, “Rancang Bangun Pelampung Penyelamat Berbasis Remote Control,” 2020. [Online]. Available: http://jurnalnasional.ump.ac.id/index.php/JRRE
E. Hadi Pranata, T. Susanto, A. Savitri Puspaningrum, L. Ratu, and B. Lampung, “PENGENDALIAN GERAK LONGITUDINAL PESAWAT FIXED WING FT-EXPLORER,” Jurnal Teknik dan Sistem Komputer (JTIKOM, vol. 4, no. 1, p. 2023, 2023.
R. Akbar et al., “Metode Kontrol Skalar dengan Penala Parameter PID Otomatis Menggunakan Algoritma PSO Sebagai Pengendali Kecepatan Motor Induksi Tiga Fasa Berbasis LabView,” 2020.
E. N. Aisyah, Z. Maulana, A. Putra, and H. A. Widodo, “RANCANG BANGUN PROTOTYPE WATER SAMPLING ELECTRIC BOAT DENGAN PENGATURAN MANUVER KAPAL MENGGUNAKAN KONTROL PID,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 11, no. 3, pp. 2830–7062, 2023, doi: 10.23960/jitet.v11i3%20s1.3577.
R. I. Alfian, A. Ma’Arif, and S. Sunardi, “Noise reduction in the accelerometer and gyroscope sensor with the Kalman filter algorithm,” Journal of Robotics and Control (JRC), vol. 2, no. 3, pp. 180–189, May 2021, doi: 10.18196/jrc.2375.
B. Wu, X. Han, and N. Hui, “System identification and controller design of a novel autonomous underwater vehicle,” Machines, vol. 9, no. 6, Jun. 2021, doi: 10.3390/machines9060109.
A. I. Yusuf, S. Samsugi, and F. Trisnawati, “SISTEM PENGAMAN PINTU OTOMATIS DENGAN MIKROKONTROLER ARDUINO DAN MODULE RF REMOTE,” 2020.
M. D. I. Putri, A. Ma’arif, and R. D. Puriyanto, “PENGENDALI KECEPATAN SUDUT MOTOR DC MENGGUNAKAN KONTROL PID DAN TUNING ZIEGLER NICHOLS,” Techno, vol. 23, pp. 9–18, Apr. 2022.
I. M. A. Wirama, I. M. A. Putra, I. M. W. M. Putra, A. A. N. Narottama, and A. A. N. G. Sapteka, “Single Phase Electric Motor Speed Control Based on Room Temperature,” TELKA, vol. 7, no. 1, pp. 21–28, 2021.
D. A. Yustiandra, E. S. Budi, and G. Al Azhar, “IMPLEMENTASI KONTROL PID PADA PEMANASAN PUPUK SEKAM BERBASIS ARDUINO,” vol. 4, Aug. 2024, doi: https://doi.org/10.3785/kohesi.v4i6.5767.
A. R. Marjan and R. Mukhaiyar, “Perancangan Konveyor Pengangkut Buah Semangka Berdasarkan Berat Berbasis Microkontroller,” Nov. 2020, doi: https://doi.org/10.38035/rrj.v3i1.
A. Jalal, M. A. K. Quaid, S. B. Ud Din Tahir, and K. Kim, “A study of accelerometer and gyroscope measurements in physical life-log activities detection systems,” Sensors (Switzerland), vol. 20, no. 22, pp. 1–23, Nov. 2020, doi: 10.3390/s20226670.
S. Samsugi, Z. Mardiyansyah, and A. Nurkholis, “SISTEM PENGONTROL IRIGASI OTOMATIS MENGGUNAKAN MIKROKONTROLER ARDUINO UNO,” 2020.
F. F. Alanro and H. Supriyono, “TRAINER PRAKTIKUM PENGENDALI KECEPATAN MOTOR DC DENGAN PID BERBASIS ARDUINO,” 2023.
J. G. Sitohang, “ANALISA PENGARUH PERUBAHAN KONSTANTA PID PADA KENDALI MOTOR DC,” 2023.
F. Wahmuda and M. C. Dwi, “PENGEMBANGAN TEKNOLOGI PADA DESAIN ALAT TRANSPORTASI AIR OBYEK WISATA KALIMAS SURABAYA,” 2021.
A. Fitra Ritonga, S. Wahyu, and F. Octavia Purnomo, “Implementasi Internet of Things (IoT) untuk Meningkatkan Kompetensi Siswa SMK Jakarta 1,” vol. 5, no. 1, 2020, [Online]. Available: http://ejurnal.kpmunj.org
F. Firdaus, E. Priatna, N. Hiron, and N. Busaeri, “PROTOTYPE SISTEM KENDALI KECEPATAN MOTOR DC DENGAN PROPORTIONAL INTEGRAL DERIVATIVE (PID) CONTROLLER,” Oktober, Tasikmalaya, Oct. 2022.
D. Setyanto and N. Sultan Salahuddin, “Prototipe Monitor dan Kontrol Otomatis Iklim Mikro Greenhouse dengan Platform IoT Blynk Greenhouse Microclimate Automatic Monitor and Control Protoype with Blynk IoT Platform,” 2022.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Perancangan Prototype Pelampung Keselamatan Elektrik dengan Algoritma Proportional Integral Derivative Untuk Kestabilan di Air
Pages: 321-329
Copyright (c) 2024 Kusrini Kusrini, Eko Pramono, Elik Hari Muktafin, Bayu Setiaji, Andriyan Dwi Putra

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).






















