Rekayasa Prototype Kran Otomatis Berbasis Arduino Uno
-
Mohammad Taufan Asri Zaen
*
STMIK Lombok, Lombok Tengah,
Indonesia
- Yuliadi Yuliadi Universitas Teknologi Sumbawa, Sumbawa, Indonesia
- Khairunnazri Khairunnazri STMIK Syaikh Zaenuddin NW Anjani, Lombok Timur, Indonesia
- Chaerun Hadiyan Syah STMIK Syaikh Zaenuddin NW Anjani, Lombok Timur, Indonesia (*) Corresponding Author
Abstract
The need for cleanliness and availability of water for the community is also getting higher. Currently, people use conventional faucets which can cause waste because the water faucets are not tightly closed or must be closed directly. Technological advancements need to be innovated to help the community in the movement to save clean water, one of which is the Arduino microcontroller. Based on these problems, the author made a prototype for making automatic water faucets equipped with motion detection sensors, ultrasonic sensors HC-SR04, servo motors as a driver to open the closing valve so that the faucet can release water and a relay to disconnect or connect the circuit that works automatically. With automatic faucets can make it easier for people to control the use of water. Arduino uno tool as controller and data processor.
Downloads
References
R. H. Farid Firmansyah, Manajemen Kualitas Jasa Peningkatan Kepuasan & Loyalitas Pelanggan. Pamekasan: Duta Media Publisihing, 2019.
S. Suhardi, “Keran Air Otomatis Pada Bak Mandi Berbasis Arduino Uno Menggunakan Sensor Ultrasonic,” Algoritm. J. Ilmu Komput. Dan Inform., vol. 3, no. 1, p. 48, 2019, doi: 10.30829/algoritma.v3i1.4438.
R. W. A. Muhammad Faisal, “Sistem Kran Air Otomatis Menggunakan Sensor Infrared Ajdustable,” Elektr. Borneo, vol. 6, no. 1, pp. 20–24, 2020, doi: 10.35334/jeb.v6i1.1505.
Alfirman, Sukamto, G. Sastria, and Fatayat, “Keran Air Otomatis Menggunakan Sensor Ultrasonic Dalam Upaya Pencegahan Covid-19,” in Seminar Nasional Teknologi Informasi, Komunikasi dan Industri (SNTIKI) 12, 2020, no. 2019, pp. 311–317, [Online]. Available: http://ejournal.uin-suska.ac.id/index.php/SNTIKI/article/download/10850/5748.
P. Kurniandisyah, M. Safii, B. E. Damanik, D. Hartama, and M. R. Lubis, “Pengendali Air Wudhu Otomatis Menggunakan Sensor Ultrasonik Berbasis Arduino,” KLIK Kaji. Ilm. Inform. dan Komput., vol. 1, no. 6, pp. 257–262, 2021, [Online]. Available: https://djournals.com/klik/article/download/204/134.
A. Amin, “Monitoring Water Level Control Berbasis Arduino UNO Menggunakan LCD LM016l,” J. EEICT, vol. 1, no. 2, pp. 41–52, 2018, [Online]. Available: https://core.ac.uk/download/pdf/229029172.pdf.
R. Gusa, D. Naruari, W. Y.-A. J. of Community, and undefined 2021, “Penerapan Alat Cuci Tangan Otomatis untuk Masyarakat Kelurahan Bukit Merapin Kota Pangkalpinang,” Journal.Unesa.Ac.Id, vol. 2, pp. 54–59, 2021, [Online]. Available: https://journal.unesa.ac.id/index.php/abimanyu/article/view/11903.
R. Hasrul, H. A. Adnan, A. D. Bhaswara, and M. A. Atsir, “Rancang Bangun Prototipe WC Pintar Berbasis Wemos D1R1 Yang Terhubung Pada Android,” J. SainETIn, vol. 5, no. 2, pp. 51–59, 2021, [Online]. Available: https://journal.unilak.ac.id/index.php/SainETIn/index 51.
A. Maariz, “Mikrokontroler,” 2021. https://raharja.ac.id/2021/10/12/microcontroller/.
Irsyad, “Apa itu Arduino Uno? Berikut Pengertian dan Fungsinya,” Cerdik, 2021. https://ndoware.com/apa-itu-arduino-uno.html.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rekayasa Prototype Kran Otomatis Berbasis Arduino Uno
Pages: 101-108
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
