Sistem Penyiram Otomatis Berbasis IOT Smart Home Pada Tanaman Rumah Menggunakan Arduino Atmega 328P
- Joshua Fines Nainggolan STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Poningsih Poningsih STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Irawan Irawan STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Eka Irawan STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
-
Nanda Amalya
*
STIKOM Tunas Bangsa, Pematangsiantar,
Indonesia
(*) Corresponding Author
Abstract
A greenhouse is a building with a frame or shaped like bubbles, covered with clear or translucent material that can transmit light optimally for production and protect plants from climatic conditions that are detrimental to plant growth. Research on an Arduino-based plant watering system in a plant house aims to design, create, and test a system to be able to carry out watering. The method used in research on an IOT smartphone-based plant watering system uses an ATMEGA 328P Arduino. There are several stages that need to be paid attention to, namely the design stage, the construction/manufacturing stage, and the installation stage. Next is the testing of products that have been made using Arduino and ESP8266. Watering can be scheduled so that it is done on time. The system can do watering; watering is done automatically with a working voltage of 208–214 VAC and 15 VDC and a constant Arduino pin voltage of 4.8 VDC. By carrying out tests on watering plants, based on the test results, the Arduino-based automatic plant watering system in the plant house can work well according to design.
Downloads
References
Y. Rahmanto, A. Rifaini, S. Samsugi, and S. D. Riskiono, “SISTEM MONITORING pH AIR PADA AQUAPONIK MENGGUNAKAN MIKROKONTROLER ARDUINO UNO,” J. Teknol. dan Sist. Tertanam, vol. 1, no. 1, p. 23, 2020, doi: 10.33365/jtst.v1i1.711.
A. Burlian and C. Bella, “Rancang Bangun Penjadwalan Otomatis Pemberian Air Pada Akuaponik Berbasis Arduino Uno R3,” Portaldata, vol. 2, no. 2, pp. 1–12, 2022.
D. Megawati, K. Masykuroh, D. Kurnianto, K. Kunci, and : Akuaponik, “Rancang Bangun Sistem Monitoring PH dan Suhu Air pada Akuaponik Berbasis Internet of Thing (IoT) Design of Monitoring System for PH and Water Temperature in Aquaponic Base on Internet of Thing (IoT),” Telka, vol. 6, no. 2, pp. 124–137, 2020.
F. Karoba, R. Nurjasmi, and S. Suryani, “Pengaruh Perbedaan pH terhadap Pertumbuhan dan Hasil Tanaman Kailan (Brassica oleraceae) Sistem Hidroponik Nft (Nutrient Film Tecnique),” J. Ilm. Respati Pertan., vol. 7, no. 2, pp. 529–534, 2015.
I. W. B. Darmawan, I. N. S. Kumara, and D. C. Khrisne, “Smart Garden Sebagai Implementasi Sistem Kontrol Dan Monitoring Tanaman Berbasis Teknologi Cerdas,” J. SPEKTRUM, vol. 8, no. 4, p. 161, 2022, doi: 10.24843/spektrum.2021.v08.i04.p19.
A. Prihanto, N. Rachmawati, and A. Prapanca, “Smart Garden Automation Dengan Memanfaatkan Teknologi Berbasis Internet Of Things (IoT),” J. Inf. Eng. Educ. Technol., vol. 5, no. 2, pp. 55–60, 2021, doi: 10.26740/jieet.v5n2.p55-60.
A. F. D. Putra, “Smart Gardening Berbasis Iot Dan Inferensi Fuzzy,” Undergrad. Thesis - Univ. Mataram, vol. 1, no. 1, p. 59, 2020.
A. Reza, A. Chabir, and S. O. Kunang, “Bina Darma Conference on Engineering Science PROTOTYPE SMART GARDEN SYSTEM BERBASIS MIKROKONTROLER Bina Darma Conference on Engineering Science,” pp. 10–19, 2018.
R. Setiawan, H. Ulfa, Miftahuljannah, D. S. Ajza, and B. Setiawan, “Penggunaan Green House untuk Budidaya Hortikultura di Halaman Sekolah SD Negeri 063 Lagi Agi,” J. Lepa-lepa Open, vol. 1, no. 3, pp. 480–487, 2021, [Online]. Available: https://ojs.unm.ac.id/JLLO/article/download/18609/pdf
N. Anis and A. Setia Budi, “Sistem Penyiraman Tanaman Bawang Merah berdasarkan Kondisi Suhu Udara, Kelembapan Tanah, dan PH Tanah dengan Metode Logika Fuzzy,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 7, no. 4, pp. 1810–1816, 2023, [Online]. Available: http://j-ptiik.ub.ac.id
Y. Mardiana and R. Riska, “Implementasi dan Analisis Arduino Dalam Rancang Bangun Alat Penyiram Tanaman Otomatis Menggunakan Aplikasi Android,” Pseudocode, vol. 7, no. 2, pp. 151–156, 2020, doi: 10.33369/pseudocode.7.2.151-156.
H. Setiyawan, R. H. Irawan, and R. Helilintar, “Sistem Sensor Penyiram Tanaman Dengan Modul Arduino Uno,” Semin. Nas. Inov. Teknol., pp. 193–198, 2022.
Y. A. Rozzi, J. Fredricka, and K. Sussolaikah, “KLIK: Kajian Ilmiah Informatika dan Komputer Desain Penyiram Tanaman Otomatis Berbasis Arduino Menggunakan Sensor Kelembaban Tanah,” KLIK Kaji. Ilm. Inform. dan Komput., vol. 3, no. 5, pp. 490–496, 2023, [Online]. Available: https://djournals.com/klik
M. N. Eka Diyah Wahyuningsih, “Pemanfaatan Green House Sebagai Salah Satu Sumber Pangan Di Desa Menang Jambon Eka,” Pros. Pengabdi. Masy., vol. 1, pp. 125–139, 2021.
E. G. Ekaputra, D. Yanti, D. Saputra, and F. Irsyad, “Rancang Bangun Sistem Irigasi Tetes untuk Budidaya Cabai (Capsicum Annum L.) dalam Greenhouse di Nagari Biaro, Kecamatan Ampek Angkek, Kabupaten Agam, Sumatera Barat,” J. Irig., vol. 11, no. 2, p. 103, 2017, doi: 10.31028/ji.v11.i2.103-112.
A. R. Restiani, S. Ttriyono, A. Tusi, and R. Zahab, “The Effect Of Lamp Types On The Growth And Production Of Lettuce Grown In An Indoor Hydrophonic System,” J. Tek. Pertan. Lampung, vol. 4, no. 3, pp. 219–226, 2015.
A. Pakpahan and R. Sirait, “Perancangan Dan Pembuatan Penyemprot Hama Pada Tanaman Padi Secara Otomatis Dengan Informasi Sms Gateway Berbasis Arduino,” J. Eng., pp. 1–12, 2020.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Penyiram Otomatis Berbasis IOT Smart Home Pada Tanaman Rumah Menggunakan Arduino Atmega 328P
Pages: 50-56
Copyright (c) 2023 Joshua Fines Nainggolan, Poningsih Poningsih, Irawan Irawan, Eka Irawan, Nanda Amalya
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
