Penerapan Alat Keran Otomatis pada Gereja Berbasis Arduin Uno dengan Sensor Ultrasonic SR04
- Daud Bintang STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Poningsih Poningsih STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Widodo Saputra STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Sumarno Sumarno STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
-
Dedy Kristianto Lumbantobing
*
STIKOM Tunas Bangsa, Pematangsiantar,
Indonesia
(*) Corresponding Author
Abstract
This research proposes the application of an automatic tap device at the GBI Tanjung Pasir Church based on an Arduino Uno with an SR04 ultrasonic sensor. Water is the main need for living creatures, especially humans, and most people think that water is a natural resource that is unlimited in quantity. Currently, the operation of tap water is done manually; people often forget to turn off the tap water when the water is full, which causes the water to overflow in the bathtub and waste water in vain, indirectly results in wastage of water, and is very less efficient. An effective way to overcome this is to set the water level limit in the bathtub. In this thesis, an automatic faucet is used using an ultrasonic sensor, namely a sensor that will detect and release or turn off water automatically by activating the primary media using a solenoid valve. The results of this research show that the sensor on the faucet can automatically solve the problem of filling the bathtub when the water level is below a predetermined limit and will stop filling when it reaches the full limit. Having an automatic faucet makes it easier for users to fill and close water without having to monitor it while preventing wastage of water in the bathtub. With an automatic faucet, it is hoped that it can prevent wastage of water in the bathtub due to the user's negligence.
Downloads
References
A. Santoso and S. Rois, “Analisa Mesin Penyiram Tanaman Jamur Menggunakam Arduino ATmega328 Berbasis Internet dan Android,” vol. 06, no. 01, pp. 20–25, 2023.
A. Fakhrana, “Pembuatan Prototype Robot Kapal Pemungut Sampah menggunakan Mikrokontroler Arduino Ano dengan Aplikasi Pengendali Berbasis Android,” J. Ilm. Teknol. dan Rekayasa, vol. 21, no. 3, pp. 185–195, 2016, [Online]. Available: https://ejournal.gunadarma.ac.id/index.php/tekno/article/view/1597/1356
S. A. H. I. A. Salihi, “RANCANG BANGUN ALAT WUDHU OTOMATIS BERBASIS ARDUINO UNO DI MESJID AL – ICHSAN GORONTALO,” vol. 5, no. 2, pp. 116–124, 2018.
A. Lim, “Prototype Alat Pengatur Sistem Pengisian Bak Penampungan Air Secara Otomatis Melalui Short Message Service Berbasis Mikrokontroller,” no. March, 2016, [Online]. Available: https://www.researchgate.net/publication/332106398
A. Soni and A. Aman, “Distance Measurement of an Object by using Ultrasonic Sensors with Arduino and GSM Module,” IJSTE-International J. Sci. Technol. Eng. |, vol. 4, no. 11, pp. 23–28, 2018, [Online]. Available: www.ijste.org
G. S. Fitri Puspasari, Imam Fahrurrozi, Trias Prima Satya, “Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian,” J. Fis. dan Apl., vol. 15, no. 2, p. 36, 2019, doi: 10.12962/j24604682.v15i2.4393.
Thiang Thiang, Yohanes TDS, and Andre Mulya, “Pengaturan Level Ketinggian Air Menggunakan Kontrol PID,” J. Tek. Elektro, vol. 4, no. 2, pp. 79–84, 2004, [Online]. Available: http://puslit2.petra.ac.id/ejournal/index.php/elk/article/view/16192
T. Informatika and A. B. S. I. Purwokerto, “Pembuatan Alat Pendeteksi Gempa Menggunakan,” J. Evolusi, vol. 6, no. 1, pp. 61–67, 2018.
P. Widodo, N. I. Fadlilah, and T. A. S. Saputro, “Merancang Pengisi Toren Berbasis Sensor HC-SR04,” Indones. J. Comput. Sci., vol. 1, no. 2, pp. 80–89, 2022, doi: 10.31294/ijcs.v1i2.1503.
M. A. Munanda and T. Yasvi, “Perancangan Keran Air Automatis Dengan Pelampung Vertikal Dengan Metode Design For Manufacturing And Assembly (DFMA),” J. Tek. Mesin Unsyiah, vol. 8, no. 2, pp. 44–46, 2020, [Online]. Available: https://ojs.uniskabjm.ac.id/index.php/eeict.
G. Sastria, “Keran Air Otomatis Menggunakan Sensor Ultrasonic Dalam Upaya Pencegahan Covid-19,” Semin. Nas. Teknol. Informasi, Komun. dan Ind., no. 2019, pp. 2579–5406, 2020, [Online]. Available: https://nasional.kompas.com/
R. Shaputra, “Kran Air Otomatis Pada Tempat Berwudhu Menggunakan Sensor Ultrasonik Berbasis Arduino Uno,” Sigma Tek., vol. 2, no. 2, p. 192, 2019, doi: 10.33373/sigma.v2i2.2085.
M. Faisal and R. W. Arsianti, “Sistem Kran Air Otomatis Menggunakan Sensor Infrared Ajdustable,” Elektr. Borneo, vol. 6, no. 1, pp. 20–24, 2020, doi: 10.35334/jeb.v6i1.1505.
A. Anantama, A. Apriyantina, S. Samsugi, and F. Rossi, “Alat Pantau Jumlah Pemakaian Daya Listrik Pada Alat Elektronik Berbasis Arduino Uno,” J. Teknol. dan Sist. Tertanam, vol. 1, no. 1, p. 29, 2020, doi: 10.33365/jtst.v1i1.712.
R. F. Purba and I. Roza, “Rancang Bangun Sistem Handsanitizer Dan Handwash Otomatis Menggunakan Sensor Proximity Berbasis Arduino Guna Mencegah Penularan Virus Corona,” RELE (Rekayasa Elektr. dan Energi) J. Tek. Elektro, vol. 4, no. 2, pp. 84–89, 2022, doi: 10.30596/rele.v4i2.9529.
K. A. T. A. Indra Gunawan, “Rancang Bangun Kendali Peralatan Rumah Tangga Berbasis Smartphone Android Studi Teknik Komputer , Universitas Hamzanwadi 2 Program Studi Teknik Informatika , Universitas Hamzanwadi 3 Teknik Audio Video , SMK Negeri 1 Kopang 1 Program Dibuktikan saat ini I,” vol. 3, no. 2, pp. 174–181, 2020.
S. Suhardi, “Keran Air Otomatis Pada Bak Mandi Berbasis Arduino Uno Menggunakan Sensor Ultrasonic,” Algoritm. J. Ilmu Komput. Dan Inform., vol. 3, no. 1, p. 48, 2019, doi: 10.30829/algoritma.v3i1.4438.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Alat Keran Otomatis pada Gereja Berbasis Arduin Uno dengan Sensor Ultrasonic SR04
Pages: 64-71
Copyright (c) 2023 Daud Bintang, Poningsih Poningsih, Widodo Saputra, Sumarno Sumarno, Dedy Kristianto Lumbantobing
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
