Pemilihan Komandan Komando Distrik Militer Menggunakan Metode WASPAS
Abstract
At the Military District Command Defense Agency (Kodim) 0201/BS Medan, it requires a Decision Support System (SPK) by applying the web-based Weighted Aggregated Sum Product Assessment (WASPAS) method in the selection process for the Commander of the 0201/BS Medan Kodim. Previously, the selection process was done manually, there were often obstacles in the process of calculating data, assessing, and storing data for each TNI personnel. The process of calculating numbers and data takes quite a long time for the members of the assessment team, so that it has an impact on the selection process that is less than optimal and can affect decision making that must be accurate and fast. The solution to overcome this problem is to create an SPK using the web-based WASPAS method. The purpose of this study is as a recommendation to assist the leadership in selecting the Candidate for the Commander of the Military District Command (Kodim) 0201/BS Medan, quickly even though the data processed is quite large. The calculation results obtained the top 5 alternatives, namely Bina Satria (A7), Azwar (A10), Soni Putrawan Ginting (A3), Agus Miadi (A4), Nirmawan (A2). The ranking after being sorted from the highest Qi value is 0.818261515 under the name of Bina Satria and the lowest Qi value is 0.690876555 under the name of Sabur Utomo
Downloads
References
N. Arifin and Komaruddin, “Komitmen Terhadap Kinerja Anggota Satuan Komando Distrik Militer 0719 Jepara,” J. Din. Ekon. 172 Bisnis, vol. 6, no. 2, pp. 171–186, 2016.
M. S. Ginanjar and D. Handayani, U.N, “Sistem Pendukung Keputusan Proses Promosi Jabatan Di Polda Jateng,” J. Din. Inform., vol. 11, no. 1, pp. 1–11, 2019, doi: 10.35315/informatika.v11i1.8143.
F. N. Yusuf, R. I. Irawati, and M. Halimah, “Analisis Faktor-Faktor Yang Mempengaruhi Kinerja TNI Di Komando Distrik Militer 0618/Bs Kota Bandung,” J. Governansi, vol. 5, no. 2, pp. 110–122, 2019, doi: 10.30997/jgs.v5i2.2173.
F. L. B. Zaqy, S. Thamrin, and L. Lasmono, “Analisis Peran Kodim 0618/Bs Kota Bandung Dalam Upaya Pengurangan Resiko Bencana Alam Di Kota Bandung,” J. Pertahanan Bela Negara, vol. 8, no. 3, pp. 103–122, 2018, doi: 10.33172/jpbh.v8i3.442.
F. L. B. Zaqy, S. Thamrin, and L. Lasmono, “Netralitas Tentara Nasional Indonesia (TNI) Komando Distrik Militer 0501 / Jakarta Pusat Berdiri Sendiri (Kodim 0501 / JP-BS) Pada Pemilihan Umum Presiden ( PilPres ) Tahun 2019 Dalam Perspektif Komunikasi,” Vol. 3, No. 1, Pp. 379–395, 2021.
D. R. Gultom And F. T. Waruwu, “Sistem Pendukung Keputusan Penempatan Prajurit Tni Ad Di Daerah Perbatasan Menggunakan Metode Multi Attribute Utility Theory (Studi Kasus: Yonif 121 Macan Kumbang, Galang, Sumatera Utara),” Pelita Inform., vol. 18, pp. 13–18, 2019.
S. Barus, V. M. Sitorus, D. Napitupulu, M. Mesran, and S. Supiyandi, “Sistem Pendukung Keputusan Pengangkatan Guru Tetap Menerapkan Metode Weight Aggregated Sum Product Assesment (WASPAS),” J. Media Inform. Budidarma, vol. 2, no. 2, pp. 10–15, 2018, doi: 10.30865/mib.v2i2.594.
K. A. Chandra and S. Hansun, “Sistem Rekomendasi Pemilihan Laptop Dengan Metode Waspas,” J. Ecotipe (Electronic, Control. Telecommun. Information, Power Eng., vol. 6, no. 2, pp. 76–81, 2019, doi: 10.33019/ecotipe.v6i2.1019.
M. Handayani and N. Marpaung, “Implementasi Metode Weight Aggregated Sum Product Assesment (Waspas) Dalam Pemilihan Kepala Laboratorium,” Semin. Nas. R. 2018 ISSN 2622-9986 STMIK R. R. ISSN 2622-6510 , vol. 9986, no. September, pp. 253 – 258, 2018.
G. Stojić, Ž. Stević, J. Antuchevičiene, D. Pamučar, and M. Vasiljević, “A novel rough WASPAS approach for supplier selection in a company manufacturing PVC carpentry products,” Inf., vol. 9, no. 5, 2018, doi: 10.3390/info9050121.
M. Sianturi, J. Tarigan, N. P. Rizanti, and A. D. Cahyadi, “Sistem Pengambilan Keputusan Pemilihan Jurusan Terbaik Pada Kuliah Menerapkan Metode Weight Aggregated Sum Product Assesment ( WASPAS ),” Sensasi, vol. 10, no. 20, pp. 160–164, 2018.
R. Sitanggang and G. Ginting, “Sistem Pendukung Keputusan Pemilihan Personil Ditreskrimsus Berprestasi Menerapkan Metode Vikor (Studi Kasus: Polda Sumut),” KOMIK (Konferensi Nas. Teknol. Inf. dan Komputer), vol. 2, no. 1, pp. 357–363, 2018, doi: 10.30865/komik.v2i1.959.
M. Mesran, K. Ulfa, D. P. Utomo, and I. R. Nasution, “Penerapan Metode VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) dalam Pemilihan Air Conditioner Terbaik,” Algoritm. J. Ilmu Komput. Dan Inform., vol. 4, no. 1, p. 24, 2020, doi: 10.30829/algoritma.v4i1.7256.
A. Tuş and E. Aytaç Adalı, “Personnel Assessment with CODAS and PSI Methods,” Alphanumeric J., vol. 6, no. 2, 2018, doi: 10.17093/alphanumeric.432843.
E. A. Adalı and A. T. Işık, “Critic and Maut Methods for the Contract Manufacturer Selection Problem,” Eur. J. Multidiscip. Stud., vol. 5, no. 1, p. 93, 2017, doi: 10.26417/ejms.v5i1.p93-101.
J. Hutagalung, and A.Azlan, “Pemanfaatan GIS dan AHP dalam Penerimaan Dana BOS Jenjang SMA,” Jurteksi, vol. VI, no. 3, pp. 221–230, 2020.
Z. Azhar, S. Informasi, F. Teknik, and U. N. Padang, “Sistem Pendukung Keputusan Dalam Pemilihan Pengembangan Model Pembelajaran Dengan Metode AHP”, vol. VII, no. 3, pp. 323–332, 2021.
J. Hutagalung, “Studi Kelayakan Pemilihan Supplier Perlengkapan Dan ATK Menggunakan Metode SAW (Simple Additive Weighting),” J-SAKTI (Jurnal Sains Komput. dan Inform., vol. 3, no. 2, p. 356, 2019, doi: 10.30645/j-sakti.v3i2.154.
F. Frieyadie and S. M. Ramadhan, “Penerapan Metode AHP Untuk Membantu Siswa Memilih Jurusan Yang Tepat Di SMK,” J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 2, no. 3, pp. 662–667, 2018, doi: 10.29207/resti.v2i3.396.
J. Hutagalung, and U. F. Sari, “Penerapan Metode K-Means dan MOORA Dalam Penerimaan Bantuan Stimulan Perumahan Swadaya ( BSPS ),” InfoTekJar : Jurnal Nasional Informatika dan T. Jaringan, vol. 6, no. 1, pp. 30–42, 2021.
J. Hutagalung and M. T. Indah R, “Pemilihan Dosen Penguji Skripsi Menggunakan Metode Aras Copras dan Waspas,” vol. 10, no.3, pp. 354–367, 2021.
R. K. Singh and S. Modgil, “Supplier selection using SWARA and WASPAS – a case study of Indian cement industry,” Meas. Bus. Excell., vol. 24, no. 2, pp. 243–265, 2020, doi: 10.1108/MBE-07-2018-0041.
D. P. Mesran, M., Suginam, S., & Utomo, “Implementation of AHP and WASPAS (Weighted Aggregated Sum Product Assessment) Methods in Ranking Teacher Performance,” Int. J. Inf. Syst. Technol. Akreditasi, vol. 3, no. 2, pp. 173–182, 2020, [Online]. Available: http://ijistech.org/ijistech/index.php/ijistech/article/view/43.
S. Sugiarti, D. K. Nahulae, T. E. Panggabean, and M. Sianturi, “Sistem Pendukung Keputusan Penentuan Kebijakan Strategi Promosi Kampus Dengan Metode Weighted Aggregated Sum Product Assesment (WASPAS),” JURIKOM (Jurnal Ris. Komputer), vol. 5, no. 2, pp. 103–108, 2018, [Online]. Available: http://ejurnal.stmik-budidarma.ac.id/index.php/jurikom%7CPage%7C103.
A. P. R. Pinem, Siti Asmiatun, and A. N. Putri, “Penentuan Lokasi Industri Menggunakan Metode WASPAS Dengan Data Spasial Sebagai Data Kriteria,” Resti, vol. 1, no. 1, pp. 19–25, 2017.
P. Miç and Z. F. Antmen, “A Decision-Making Model Based on TOPSIS, WASPAS, and MULTIMOORA Methods for University Location Selection Problem,” SAGE Open, vol. 11, no. 3, p. 215824402110401, 2021, doi: 10.1177/21582440211040115.
M. Keshavarz-Ghorabaee, M. Amiri, M. Hashemi-Tabatabaei, E. K. Zavadskas, and A. Kaklauskas, “A new decision-making approach based on fermatean fuzzy sets and waspas for green construction supplier evaluation,” Mathematics, vol. 8, no. 12, pp. 1–24, 2020, doi: 10.3390/math8122202.
D. Sergi and I. Ucal Sari, “Prioritization of public services for digitalization using fuzzy Z-AHP and fuzzy Z-WASPAS,” Complex Intell. Syst., vol. 7, no. 2, pp. 841–856, 2021, doi: 10.1007/s40747-020-00239-z.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Pemilihan Komandan Komando Distrik Militer Menggunakan Metode WASPAS
Pages: 420-429
Copyright (c) 2022 Juniar Hutagalung, Ahmad Fitri Boy, Dicky Nofriansyah

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).






















