Desain dan Analisis Quality of Service Pada Sistem Otomasi Rumah Menggunakan Wireless Sensor Network
-
Muhammad Agung Raharjo
*
STMIK Handayani Makassar, Makassar,
Indonesia
- Andani Ahmad STMIK Handayani Makassar, Makassar, Indonesia
- Yuyun Wabula STMIK Handayani Makassar, Makassar, Indonesia (*) Corresponding Author
Abstract
The problem raised in the study is how to control lights and air conditioners automatically via a smartphone with reliability and power efficiency. A home automation system for the use of lights and air conditioners works according to weather and temperature conditions using LDR sensors and DHT11 sensors from anywhere via the internet network so that it can identify and monitor the device in an on or off-state. For this reason, a design of a home control system is needed that can help users identify and monitor electronic devices remotely through a user interface, or automatically. This study aims to design a home automation system based on a Wireless Sensor Network (WSN) so that it can be used to control lights and air conditioners automatically and flexibly. In addition, this study also measures and analyzes Quality of Service (QoS) using delay parameters, packet loss, and throughput according to the TIPHON standard. From this study, the results of the tests carried out for the control function of electronic equipment connected to the home automation system using ESP8266, LDR, and Relay Node can function properly, while the network quality test according to the Quality of Service (QoS) Analysis using the TIPHON standard obtained results for Delay is 154.6 ms can be categorized as Good, while for the quality of the Loss packet it is 0.0033% with an outstanding category, while for the Throughput value is 2.2996 kbps which is categorized as bad.
Downloads
References
Y. Yang, “Adaptive Switching And Routing Protocol Design And Optimization In Internet Of Things Based On Probabilistic Modelsa,” Int. J. Intell. Networks, vol. 5, no. March, pp. 204–211, 2024, doi: 10.1016/j.ijin.2024.05.001.
T. Alam, S. Sarker, and A. F. M. Z. Abadin, “Internet of Things-based Home Automation with Network Mapper and MQTT Protocol,” Comput. Electr. Eng., vol. 120, no. PC, p. 109807, 2024, doi: 10.1016/j.compeleceng.2024.109807.
Y. Roza, K. Musliadi, Y. Pernando, I. Syafrinal, and Kaharuddin, “Rancang Bangun Monitoring Debit Air PDAM Rumah Tangga Berbasis Internet of Things (IoT),” SKANIKA Sist. Komput. dan Tek. Inform., vol. 7, no. 2, pp. 214–223, 2024.
N. Fath, P. W. Purnawan, and I. M. S. S. Y. Mawantu, “Peningkatan Pemahaman Tentang Smart Lighting Berbasis Internet of Things Untuk Efisiensi Bangunan Hemat Energi Kepada Siswa Sma Budi Luhur Tangerang,” SELAPARANG J. Pengabdi. Masy. Berkemajuan, vol. 7, no. 3, p. 1964, 2023, doi: 10.31764/jpmb.v7i3.17218.
Maspiati, Nasruddin, and K. Musliadi, “Sistem Informasi Pemesanan Baju Olahraga Berbasis Web Pada Konveksi ‘ Adher ’ Tammerodo Sendana Majene,” Sinov. - Sci. Lit. Innov. Technol. J., vol. 01, no. 01, pp. 7–13, 2024.
J. Liu, Z. Zhao, J. Ji, and M. Hu, “Research and application of wireless sensor network technology in power transmission and distribution system,” Intell. Converg. Networks, vol. 1, no. 2, pp. 199–220, 2020, doi: 10.23919/ICN.2020.0016.
Retno Devita, Nanda Tommy Wirawan, and David Agustri Syafni, “Perancangan Prototipe Keamanan Pintu Rumah Menggunakan Kamera Ttl Dan Aplikasi Telegram Berbasis Arduino,” J. Ilm. Sist. Inf. dan Ilmu Komput., vol. 2, no. 2, pp. 49–61, 2022, doi: 10.55606/juisik.v2i2.199.
A. B. Isro, A. T. Zy, and S. Andika, “Optimalisasi Load Balancing Menggunakan Metode NDLC untuk Meningkatkan Kualitas Layanan Jaringan Internet,” J. Inf. Syst. Res., vol. 5, no. 4, pp. 988–997, 2024, doi: 10.47065/josh.v5i4.5484.
M. Mahmud and Y. Aprizal, “The Penerapan QoS (Quality Of Service) Dalam Menganalisis Kualitas Kinerja Jaringan Komputer (Studi Kasus Hotel Maxone Palembang),” J. Inf. Syst. Res., vol. 3, no. 4, pp. 374–379, 2022, doi: 10.47065/josh.v3i4.1567.
G. P. Utama, “Penerapan Metode Prototype untuk Smart Home Menggunakan Sensor LDR , DHT dan Infrared Implementation Of Prototype Method For Android-Based Smart Home Using Ldr , Dht , and Infrared Sensors,” Senafti, vol. 2, no. September, pp. 1803–1811, 2023.
K. Musliadi, P. Yonky, and K. Kaharuddin, “PADrink-Poultry Automatic Drinking System Innovation Using Arduino,” J. Fasilkom, vol. 14, no. 2, pp. 420–427, 2024, doi: https://doi.org/10.37859/jf.v14i2.7238.
K. Musliadi and P. Yonky, “Perancangan Prototype Alat Penghapus Papan Tulis Otomatis Dengan Koneksi Bluetooth,” J. Digit. Ecosyst. Nat. Sustain., vol. 2, no. 2, pp. 67–72, 2022.
N. Hardi, R. Afuw Rouf Subyan, and A. Arbasyah, “Alat Berbasis IOT Smarthome Monitoring dan Kontrol via Telegram Menggunakan Nodemcu,” Insantek, vol. 4, no. 1, pp. 7–11, 2023, doi: 10.31294/instk.v4i1.2018.
R. U. M. Raharja, A. Pudoli, and D. Kusumaningsih, “Prototype Smart Home Berbasis Iot Dengan Nodemcu Esp8266, Motor Servo Dan Sensor Suhu Dht11 Berbasis Web,” Skanika, vol. 5, no. 2, pp. 265–274, 2022, doi: 10.36080/skanika.v5i2.2952.
D. Adidrana, A. R. Hakim, H. Suryoprayogo, and I. R. Yansyah, “Perancangan Sistem Smart Lamp berbasis Internet of Things Menggunakan Ubidots,” J. Informatics Commun. Technol., vol. 5, no. 1, pp. 130–138, 2023, doi: 10.52661/j_ict.v5i1.193.
M. F. Syah and Y. Shalahuddin, “Blynk Android App-Based System Smart Home Prototype,” JTECS J. Sist. Telekomun. Elektron. Sist. Kontrol Power Sist. dan Komput., vol. 2, no. 2, p. 91, 2022, doi: 10.32503/jtecs.v2i2.684.
S. S. Sadi, I. Pratama, and S. M. Ardi Kalizar, “Perancangan Sistem Smart Home Berbasis Internet Of Things,” J. Tek. Elektro, vol. 7, no. 1, p. 18, 2023, doi: 10.31000/jte.v7i1.9787.
R. S. Firgianingsih U, Nurchim and Usanto, “Implementasi Sistem Smart Home Untuk Monitoring Dan Kontrol Peralatan Rumah Berbasis Internet of Things,” Pros. Semin. …, vol. 09, pp. 1–12, 2023, [Online]. Available: http://senafti.budiluhur.ac.id/index.php/senafti/article/view/566%0Ahttp://senafti.budiluhur.ac.id/index.php/senafti/article/download/566/294.
Y. Roza, K. Musliadi, and Y. Pernando, “Presence Prototype Model Design Using RFID RC522,” Sci. Lit. Innov. Technol. J., vol. 1, no. 02, pp. 26–31, 2024.
N. Farman, Syafriandi, and D. Muhammad, “Desain Mesin Penyangrai Kopi Menggunakan Sumber Elemen Pemanas Listrik (Heater) dan Tenaga Penggerak Motor Listrik,” J. Ilm. Mhs. Pertan., vol. 7, no. 1, pp. 535–542, 2022, doi: 10.17969/jimfp.v7i1.19025.
C. Francisco, S. Gomes, M. Santos, C. Francisco, and S. Gomes, “Creation And Implementation Of An Iot-Based Thermometer Prototype For A Food Organization : Case Study,” Procedia Comput. Sci., vol. 199, no. 2021, pp. 710–717, 2022, doi: 10.1016/j.procs.2022.01.088.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Desain dan Analisis Quality of Service Pada Sistem Otomasi Rumah Menggunakan Wireless Sensor Network
Pages: 1645-1652
Copyright (c) 2025 Muhammad Agung Raharjo, Andani Ahmad, Yuyun Wabula
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
