Perancangan Sistem Deteksi dan Pengendalian Kebakaran Menggunakan Sensor Gas, Api, Asap, Arduino, dan Blynk
- Muhammad Irfanil Hanif Universitas Muhammadiyah Prof. Dr. Hamka, Jakarta, Indonesia
-
Estu Sinduningrum
*
Universitas Muhammadiyah Prof. Dr. Hamka, Jakarta,
Indonesia
(*) Corresponding Author
Abstract
This study develops an Internet of Things (IoT)-based fire detection and control system with two-mode monitoring (offline and online) to provide solutions for early fire prevention and handling. The system integrates multiple sensors (MQ-2, MQ-135, and flame sensor) to detect flammable gas, smoke, and fire, and is equipped with actuators in the form of servos, fans, water pumps, and buzzers as automatic responses. Monitoring is carried out via I2C LCD for offline mode and Blynk application for online mode. The research method uses an experimental approach with stages of literature study, system design, prototype development, testing, data analysis, and improvement and optimization. The test results show that the system is able to detect fire up to a distance of 30 cm, gas with a concentration above 300 ppm, and smoke with a concentration above 200 ppm. The actuators work according to the designed programming. This system successfully integrates early detection, automatic response, and remote monitoring to provide a comprehensive solution in fire prevention and handling.
Downloads
References
H. D. Cahyadi, Y. Mirza, and E. Laila, “Rancang Bangun Alat Pendeteksi Kebakaran Menggunakan Flame Sensor dan Sensor Asap Berbasis Arduino,” J. Lap. Akhir Tek. …, vol. 2, no. 1, pp. 60–69, 2022, [Online]. Available: https://jurnal.polsri.ac.id/index.php/JLATK/article/view/6193%0Ahttps://jurnal.polsri.ac.id/index.php/JLATK/article/download/6193/2276
Pratama, “Rancang Bangun Alat Peringatan Kebakaran Dengan Sensor Suhu dan Asap Menggunakan Arduino,” J. Mhs. Apl. Teknol. Komput. dan Inf., vol. 4, no. 1, pp. 1–7, 2022.
Saramuddin, “Cara Mudah Kuasai Mikrokontroler Arduino Teori Dan Praktek,” Angew. Chemie Int. Ed. 6(11), 951–952., vol. 3, no. 1, pp. 10–27, 2018, [Online]. Available: https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf
R. Inggi and J. Pangala, “Perancangan Alat Pendeteksi Kebocoran Gas LPG Menggunakan Sensor MQ-2 Berbasis Arduino,” Simkom, vol. 6, no. 1, pp. 12–22, 2021, doi: 10.51717/simkom.v6i1.51.
D. Zidifaldi, A. Abdullah, K. Sari, and I. Fakhruzi, “Pemanfaatan iot sebagai sistem deteksi dini kebakaran dengan sensor api dan sensor suhu berbasis arduino,” J. Digit. Teknol. Inf., vol. 5, no. 2, p. 66, 2022, doi: 10.32502/digital.v5i2.4338.
D. Indra, E. I. Alwi, and M. Al Mubarak, “Prototipe Sistem Kontrol Pemadam Kebakaran Pada Rumah Berbasis Arduino Uno dan ESP8266,” Komputika J. Sist. Komput., vol. 11, no. 1, pp. 1–8, 2021, doi: 10.34010/komputika.v11i1.4801.
H. HUTAPEA and Y. R. SETIAWAN, “Rancang Bangun Sistem Alarm Kebakaran Terintegrasi Berbasis Arduino,” J. Kaji. Tek. Elektro, vol. 6, no. 1, pp. 12–19, 2021, doi: 10.52447/jkte.v6i1.5195.
H. Kurnia Safitri, D. Dewatama, A. Pracoyo, and R. Agung Wicaksono, “Perancangan Sistem Pendeteksi Kebakaran Rumah Menggunakan IoT(Internet of Things),” J. Elektron. dan Otomasi Ind., vol. 9, no. 3, pp. 294–299, 2023, doi: 10.33795/elkolind.v9i3.4287.
M. A. A. P, S. Nanra, and J. Jn, “Perancangan Sistem Alarm Kebakaran Berbasis IoT Untuk Mendeteksi Kebakaran Secara Real-Time,” vol. 14, no. 3, pp. 21–30, 2024.
M. Hafiz and O. Candra, “Perancangan Sistem Pendeteksi Kebakaran Berbasis Mikrokontroller dan Aplikasi Map dengan Menggunakan IoT,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 7, no. 1, p. 53, 2021, doi: 10.24036/jtev.v7i1.111420.
U. A. Saputro and A. Tuslam, “Sistem Deteksi Kebakaran Berbasis Internet Of Things Dengan Pesan Peringatan Menggunakan NodeMCU ESP8266 Dan Platform ThingSpeak,” J. Infomedia, vol. 7, no. 1, p. 24, 2022, doi: 10.30811/jim.v7i1.2958.
M Wahidin, A. Elanda, and S. S. Lie, “Implementasi Sistem Pendeteksi Kebakaran Berbasis IoT dan Telegram Menggunakan Nodemcu Pada Kantor Notaris Leodi Chanda Hidayat, S.H., M.Kn,” J. Interkom J. Publ. Ilm. Bid. Teknol. Inf. dan Komun., vol. 16, no. 2, pp. 1–8, 2021, doi: 10.35969/interkom.v16i2.104.
M. S. Ummah, “Pengantar Mikroprosesor dan Mikrokontroler,” Sustain., vol. 11, no. 1, pp. 1–14, 2019, [Online]. Available: http://scioteca.caf.com/bitstream/handle/123456789/1091/RED2017-Eng-8ene.pdf?sequence=12&isAllowed=y%0Ahttp://dx.doi.org/10.1016/j.regsciurbeco.2008.06.005%0Ahttps://www.researchgate.net/publication/305320484_SISTEM_PEMBETUNGAN_TERPUSAT_STRATEGI_MELESTARI
Tri Sulistyorini, Nelly Sofi, and Erma Sova, “Pemanfaatan Nodemcu Esp8266 Berbasis Android (Blynk) Sebagai Alat Alat Mematikan Dan Menghidupkan Lampu,” J. Ilm. Tek., vol. 1, no. 3, pp. 40–53, 2022, doi: 10.56127/juit.v1i3.334.
R. Arrahman, “Rancang Bangun Pintu Gerbang Otomatis Menggunakan Arduino Uno R3,” J. Portal Data, vol. 2, no. 2, pp. 1–14, 2022, [Online]. Available: http://portaldata.org/index.php/portaldata/article/view/78
D. A. Nugraha and B. Satria, “Prototype Alat Pendeteksi Kebakaran Menggunakan Sensor Flame dan MQ-2 Berbasis Arduino Uno,” Indones. J. Comput. Sci., vol. 11, no. 3, pp. 936–944, 2022, doi: 10.33022/ijcs.v11i3.3102.
F. Ferdyansyah, R. Suhradi Rahmat, J. Education Park, J. Ki Hajar Dewantara, and N. Cikarang, “Alat Pendeteksi Kebakaran dan Pemadam Api Otomatis Menggunakan Kontrol Arduino,” J. Mech. Eng. Mechatronics, vol. 7, no. 2, pp. 77–89, 2022.
E. B. Sambani, D. Rohpandi, and F. A. Fauzi, “Sistem Monitoring Alat Pendeteksi Asap Rokok Pada Ruangan Berbasis Mikrokontroler Menggunakan Mq-135 Dan Telegram,” e-Jurnal JUSITI (Jurnal Sist. Inf. dan Teknol. Informasi), vol. 10, no. 1, pp. 53–61, 2021, doi: 10.36774/jusiti.v10i1.820.
Y. Darnita, A. Discrise, and R. Toyib, “Prototype Alat Pendeksi Kebakaran Menggunakan Arduino,” J. Inform. Upgris, vol. 7, no. 1, pp. 3–7, 2021, doi: 10.26877/jiu.v7i1.7094.
D. Kusumayani and Cucu Suhery, “Simulasi Internet of Things (Iot) Pada Budi Daya Jamur Tiram,” J. Inform. dan Rekayasa Elektron., vol. 6, no. 2, pp. 170–180, 2023, doi: 10.36595/jire.v6i2.966.
W. A. Septryanti, A., Sari, L. I., & Probonegoro, “Pendeteksi Kadar Gas Karbon Monoksida Pada Ruangan Berbasis Arduino ATMega 328,” J. Ilm. Tek. Inform. dan Sist. Informasii, vol. 12, no. 1, pp. 243–253, 2023.
T. H. Siregar, S. P. Sutisna, G. E. Pramono, and M. M. Ibrahim, “Rancang Bangun Sistem Pendeteksi Kebakaran Berbasis Iot Menggunakan Arduino,” AME (Aplikasi Mek. dan Energi) J. Ilm. Tek. Mesin, vol. 7, no. 2, p. 59, 2021, doi: 10.32832/ame.v7i2.5063.
E. D. Madyatmadja, L. Kusumawati, S. P. Jamil, W. Kusumawardhana, S. Informasi, and U. B. Nusantara, “Infotech: journal of technology information,” Raden Ario Damar, vol. 7, no. 1, pp. 55–62, 2021.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Perancangan Sistem Deteksi dan Pengendalian Kebakaran Menggunakan Sensor Gas, Api, Asap, Arduino, dan Blynk
Pages: 1217-1226
Copyright (c) 2025 Muhammad Irfanil Hanif, Estu Sinduningrum
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
