Sistem Pendukung Keputusan Pemilihan Kepala Karyawan Produksi Menggunakan Metode Simple Additive Weighting (SAW)
- Abednego Erindra Putra Universitas Teknokrat Indonesia, Bandar Lampung, Indonesia
-
Ikbal Yasin
*
Universitas Teknokrat Indonesia, Bandar Lampung,
Indonesia
(*) Corresponding Author
Abstract
CV. Wahyu Putra is one of the companies operating in the agricultural sector that has not utilized information technology in developing its company. This includes the problem of selecting head employees which is still determined subjectively. This problem can be resolved by conducting a performance assessment of each employee to evaluate, motivate and verify in order to improve employee performance. The use of Decision Support Systems (DSS) in human resource management is becoming increasingly important, especially in assessing employees for the selection of chief production employees. Therefore, this research was carried out using the Simple Additive Weighting (SAW) method which has 7 assessment criteria, namely discipline, responsibility, ability, cooperation, thoroughness, leadership and years of service. In the decision making process, testing was carried out on 8 employees in the production department who were alternatives. The results of this research were obtained from calculations using the SAW method starting from determining alternatives, determining criteria and weights, carrying out a normalization matrix, and calculating the final score or ranking results. From the implementation of the SAW method that has been carried out on CV. Wahyu Putra, the recommended candidate for chief employee is alternative A3 with a final value of 0.935. This research provides suggestions on how to determine the head of employees at CV. Putra's revelation, which had previously been carried out subjectively, became objective.
Downloads
References
A. M. P. Nugraha and I. Halim Mursyidin, “Sistem Pendukung Keputusan Penilaian Kinerja Guru Menggunakan Metode SAW,” bit-Tech, vol. 7, no. 1, pp. 174–183, Aug. 2024, doi: 10.32877/bt.v7i1.1608.
P. S. Dewi, C. K. Sastradipraja, and D. Gustian, “Sistem Pendukung Keputusan Kenaikan Jabatan Menggunakan Metode Algoritma Naïve Bayes Classifier,” Jurnal Teknologi dan Informasi, vol. 11, no. 1, pp. 66–80, Mar. 2021, doi: 10.34010/jati.v11i1.3593.
Mohammad Vicky Haykal, “Sistem Pendukung Keputusan Pemilihan Karyawan Terbaik Menggunakan Metode Weighted Product Pada Pt Sumber Natural Indonesia,” Jurnal Sistem Informasi dan Teknologi (SINTEK), vol. 2, no. 2, pp. 45–52, Nov. 2022, doi: 10.56995/sintek.v2i2.44.
A. Rikki, “Pengujian Sistem Pendukung Keputusan Metode Simple Additive Weighting dan Weighted Product dengan Matlab,” MEANS (Media Informasi Analisa dan Sistem), pp. 47–51, Jun. 2017, doi: 10.54367/means.v2i1.23.
J. V. B. Ginting, “Penerapan Sistem Pendukung Keputusan Dalam Menentukan e-Commerce Terbaik Dengan Menggunakan Metode SAW,” JURNAL MEDIA INFORMATIKA BUDIDARMA, vol. 4, no. 1, p. 225, Jan. 2020, doi: 10.30865/mib.v4i1.1986.
Y. Yulisman and R. Wahyuni, “Sistem Pendukung Keputusan Penentuan Bonus Karyawan Dengan Metode SAW Pada PT. Delima Makmur Aceh Singkil,” JTIM : Jurnal Teknologi Informasi dan Multimedia, vol. 3, no. 2, pp. 78–90, Aug. 2021, doi: 10.35746/jtim.v3i2.154.
M. F. Penta, F. B. Siahaan, and S. H. Sukamana, “Sistem Pendukung Keputusan Pemilihan Karyawan Terbaik Menggunakan Metode SAW pada PT. Kujang Sakti Anugrah,” JSAI (Journal Scientific and Applied Informatics), vol. 2, no. 3, Nov. 2019, doi: 10.36085/jsai.v2i3.410.
F. R. Fahmi and M. R. Wayahdi, “Implementation of SAW Method in Website-Based Application (Case Study: New Employee Recruitment at PT. Technology Laboratories Indonesia),” Jurnal Minfo Polgan, vol. 13, no. 1, pp. 1220–1227, Aug. 2024, doi: 10.33395/jmp.v13i1.13998.
F. Seran, Y. P. K. Kelen, and D. Nababan, “Sistem Pendukung Keputusan Penentuan Jurusan Menggunakan Metode Weighted Product,” Jurnal Tekno Kompak, vol. 17, no. 1, p. 147, Feb. 2023, doi: 10.33365/jtk.v17i1.2154.
Liga Mayola, D. Guswandi, W. Safitri, M. Hafiz, and M. Yuhandri, “Perbandingan Tingkat Akurasi SAW-TOPSIS dalam Penilaian Kelayakan Proposal,” Jurnal KomtekInfo, pp. 101–108, Sep. 2023, doi: 10.35134/komtekinfo.v10i3.415.
S. Novianto, Panca Hutama Caniago, and Pulung Nurtantio Andono, “Penerapan Metode SAW untuk Perancangan SPK Penerimaan Karyawan Di PT Pinnacle Apparels,” Journal on Pustaka Cendekia Informatika, vol. 1, no. 2, pp. 102–108, Aug. 2023, doi: 10.70292/pctif.v1i2.19.
T. Ramadhani Putri et al., “Implementasi Algoritma Simple Additive Weighting (SAW) Pada Sistem Pendukung Keputusan Pemilihan Sekolah Lanjutan Tingkat Atas (SLTA) di Kota Solok,” JEKIN - Jurnal Teknik Informatika, vol. 3, no. 3, pp. 34–45, Feb. 2024, doi: 10.58794/jekin.v3i3.629.
E. K. Ulama, A. T. Priandika, and F. Ariany, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN SAPI SIAP JUAL (TERNAK SAPI LEMBU JAYA LESTARI LAMPUNG TENGAH) MENGGUNAKAN METODE SAW,” Jurnal Informatika dan Rekayasa Perangkat Lunak, vol. 3, no. 2, pp. 138–144, Oct. 2022, doi: 10.33365/jatika.v3i2.2022.
A. F. Pasaribu, A. Surahman, A. T. Priandika, S. Sintaro, and Y. T. Utami, “Sistem Pendukung Keputusan Seleksi Penerimaan Guru Menggunakan SAW,” Journal of Artificial Intelligence and Technology Information (JAITI), vol. 1, no. 1, pp. 13–19, Feb. 2023, doi: 10.58602/jaiti.v1i1.21.
P. Rosyani, “Penilaian Kinerja Karyawan Berprestasi Dengan Metode Simple Additive Weighting,” International Journal of Artificial Intelligence, vol. 6, no. 1, pp. 82–111, Sep. 2019, doi: 10.36079/lamintang.ijai-0601.34.
K. M. Sukiakhy, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN KARYAWAN TERBAIK PADA CV. EL GLORY MENGGUNAKAN METODE SAW,” Jurnal Geuthèë: Penelitian Multidisiplin, vol. 4, no. 3, p. 160, Dec. 2021, doi: 10.52626/jg.v4i3.135.
E. Simanungkalit, J. S. Tarigan, D. C. Sari, and A. S. Hasibuan, “Implementation of Simple Additive Weighting (SAW) Method in Decision Support System to Determine the Best University in Medan,” International Journal of Research in Vocational Studies (IJRVOCAS), vol. 2, no. 4, pp. 168–172, Jan. 2023, doi: 10.53893/ijrvocas.v2i4.190.
M. Muthmainnah, M. Khaira, R. P. Fhonna, and V. Ilhadi, “Penerapan Model Decision Dalam Dalam Penilaian Penilaian Kinerja Dengan Model Saw,” Sisfo: Jurnal Ilmiah Sistem Informasi, vol. 6, no. 1, p. 37, May 2022, doi: 10.29103/sisfo.v6i1.7963.
W. Sulistyani, H. Hasanah, and P. Widyaningsih, “Sistem Pendukung Keputusan Pemilihan Kinerja Karyawan Terbaik dengan Metode Simple Additive Weighting,” Digital Transformation Technology, vol. 3, no. 2, pp. 326–335, Sep. 2023, doi: 10.47709/digitech.v3i2.2653.
V. Garc’ia-D’iaz, Algorithms in Decision Support Systems. MDPI AG, 2021. doi: 10.3390/books978-3-0365-0589-3.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Pendukung Keputusan Pemilihan Kepala Karyawan Produksi Menggunakan Metode Simple Additive Weighting (SAW)
Pages: 1372-1380
Copyright (c) 2025 Abednego Erindra Putra, Ikbal Yasin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
