IoT-based Intelligent System for Laboratory Facility Control with Blynk
-
Puji Utami Rakhmawati
*
University of PGRI Wiranegara, Pasuruan,
Indonesia
- Rizdania Rizdania University of PGRI Wiranegara, Pasuruan, Indonesia
- Muhammad Nasikhul Muladi University of PGRI Wiranegara, Pasuruan, Indonesia (*) Corresponding Author
Abstract
This study presents the development of a smart laboratory using the Internet of Things (IoT) intelligent system technology to control electronic devices, especially air conditioners (AC). The AC in the laboratory is a device that consumes very high electrical power. Human resources personnel who use the laboratory often forget to turn off the devices after use. The problem is high electricity costs due to forgetting to switch off devices. This study solves this problem with an IoT-based intelligent system to control laboratory facilities by utilizing the Blynk App. Blynk is an Android-based open-source software that can connect with ESP32, so control can be done easily anywhere and anytime. In this study, a prototype IoT control system was developed that allows users to control and monitor equipment via the internet automatically. This study uses ESP32 technology, where an Arduino device is used as the receiver connected to Wi-Fi, and a microcontroller is used as an automatic control. ON/OFF control using 220v 30A relays as many as four pieces. Test results from this study showed that the device provides a response time of 1 second to respond to commands, and the four relays installed successfully controlled the devices.
Downloads
References
B. K. Tripathy and J. Anuradha, Internet of Things ( IoT ): Technologies , Applications , Challenges and Solutions, no. October 2017. CRC Press, Taylor & Francis Group, 2018.
A. Rayes and S. Salam, Internet of Things From Hype to Reality - The Road to Digitization. Springer, 2019. doi: 10.1007/978-3-319-99516-8.
R. Minerva, A. Biru, and D. Rotondi, “Towards a definition of the Internet of Things (IoT),” Italia, 2015.
M. Poongothai, P. M. Subramanian, and A. Rajeswari, “Design and Implementation of IoT Based Smart Laboratory,” in 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018, IEEE, 2018, pp. 169–173. doi: 10.1109/IEA.2018.8387090.
A. A. Da Conceic’ao et al., “Internet of Things Environment Automation: A Smart Lab Practical Approach,” in Proceedings - 2022 2nd International Conference on Information Technology and Education, ICIT and E 2022, IEEE, 2022, pp. 322–327. doi: 10.1109/ICITE54466.2022.9759899.
M. Cherian and H. K. P, “Implementation of a Secure and Smart Lab with Wireless Sensor Network,” Int. J. Sci. Res., vol. 3, no. 6, pp. 2012–2015, 2014.
V. S. K. N and K. S. M, “Home Automation Using Internet of Things,” Lect. Notes Networks Syst., vol. 39, pp. 293–301, 2019, doi: 10.1007/978-981-13-0277-0_24.
H. Tahir, A. Kanwer, and M. Junaid, “Internet of Things ( IoT ): An Overview of Applications and Security Issues Regarding Implementation,” Int. J. Multidiscip. Sci. Eng., vol. 7, no. 1, pp. 14–22, 2016, [Online]. Available: http://www.ijmse.org/Volume7/Issue1/paper3.pdf
A. M. Ibrahim and D. Setiyadi, “Prototype Pengendalian Lampu Dan Ac Jarak Jauh Dengan Jaringan Internet Menggunakan Aplikasi Telegram Berbasis Nodemcu Esp8266,” Infotech J. Technol. Inf., vol. 7, no. 1, pp. 27–34, 2021, doi: 10.37365/jti.v7i1.103.
F. S. Permana, M. N. S. Putro, and R. Suwartika, “Jurnal Teknik Informatika Atmaluhur,” J. Tek. Inform. Atmaluhur, vol. 6, no. 1, p. 40, 2022.
B. Setiawan and Windarto, “Prototype Internet of Things for Smart Home berbasis Web Menggunakan Modul ESP8266,” in Prosiding Seminar Nasional Mahasiswa Fakultas Teknologi Informasi (SENAFTI), 2022, pp. 1103–1111. [Online]. Available: https://senafti.budiluhur.ac.id/index.php/senafti/article/view/284
A. B. Lasera and I. H. Wahyudi, “Pengembangan Prototipe Sistem Pengontrolan Daya Listrik berbasis IoT ESP32 pada Smart Home System,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 5, no. 2, pp. 112–120, 2020, doi: 10.21831/elinvo.v5i2.34261.
S. Dey and T. Bera, “Design and Development of a Smart and Multipurpose IoT Embedded System Device Using ESP32 Microcontroller,” in IEEE International Conference on Electrical, Electronics, Communication and Computers, ELEXCOM 2023, IEEE, 2023, pp. 1–6. doi: 10.1109/ELEXCOM58812.2023.10370327.
A. Wagyana and Rahmat, “Prototipe Modul Praktik untuk Pengembangan Aplikasi Internet of Things (IoT),” Setrum Sist. Kendali-Tenaga-elektronika-telekomunikasi-komputer, vol. 8, no. 2, pp. 238–247, 2019, doi: 10.36055/setrum.v8i2.6561.
Junaidi and Y. D. Prabowo, Project Sistem Kendali Elektronik Berbasis Arduino. Bandar Lampung: Aura, 2018.
H. Santoso, Pengertian, Fungsi, dan Cara Kerja Relay. Situbondo, Accessed: Sep. 01, 2024. [Online]. Available: http://www.elangsakti.com/2013/03/pengertian-fungsi-prinsip-dan-cara.html
P. Bayborodin, I. Liashchuk, and D. Dumanskiy, “Blynk.” Accessed: Sep. 01, 2024. [Online]. Available: https://blynk.io/
A. Herlina, M. I. Syahbana, M. A. Gunawan, and M. M. Rizqi, “Sistem Kendali Lampu Berbasis Iot Menggunakan Aplikasi Blynk 2.0 Dengan Modul Nodemcu Esp8266,” INSANtek, vol. 3, no. 2, pp. 61–66, 2022, doi: 10.31294/instk.v3i2.1532.
T. Juwariyah, S. Prayitno, and A. Mardhiyya, “Perancangan Sistem Deteksi Dini Pencegah Kebakaran Rumah Brbasis Esp8266 dan Blynk,” J. Transistor Elektro dan Inform. (TRANSISTOR EI), vol. 3, no. 2, pp. 120–126, 2018.
D. Purnomo, “Model Prototyping Pada Pengembangan Sistem Informasi,” J I M P - J. Inform. Merdeka Pasuruan, vol. 2, no. 2, pp. 54–61, 2017, doi: 10.37438/jimp.v2i2.67.
P. Yoko, R. Adwiya, and W. Nugraha, “Penerapan Metode Prototype dalam Perancangan Aplikasi SIPINJAM Berbasis Website pada Credit Union Canaga Antutn,” J. Ilm. Merpati (Menara Penelit. Akad. Teknol. Informasi), vol. 7, no. 3, p. 212, 2019, doi: 10.24843/jim.2019.v07.i03.p05.
U. R. Khotimah, Y. Yudhistira, and F. Nabyla, “Implementasi Sistem Informasi Pengelolaan Wakaf Menggunakan Metode Prototyping Pada Yayasan,” J. Sist. Inf. dan Teknol. Perad., vol. 3, no. 2, pp. 38–45, 2022.
A. Maulana Ibrahim, A. Solikhin, M. Karya Mandiri, and P. Studi Manajemen Informatika Politeknik Mitra Karya Mandiri, “Sistem Kontrol dan Monitoring Berbasis IoT pada Lampu dan AC di Laboratorium Komputer Politeknik Mitra Karya Mandiri,” J. Univ. Muhammadiyah Jakarta, vol. 13, no. 2, pp. 87–91, 2023, [Online]. Available: https://jurnal.umj.ac.id/index.php/just-it/index
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel IoT-based Intelligent System for Laboratory Facility Control with Blynk
Pages: 304-311
Copyright (c) 2024 Puji Utami Rakhmawati, Rizdania Rizdania, Muhammad Nasikhul Muladi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
