Prototype Sensor Parking Otomatis Pada Area Blind-Spot Kendaraan Menggunakan Mikrokontroler
-
Rafika Sari
*
Universitas Bhayangkara Jakarta Raya, Bekasi,
Indonesia
- Herlawati Herlawati Universitas Bhayangkara Jakarta Raya, Bekasi, Indonesia
- Fata Nidaul Khasanah Universitas Bhayangkara Jakarta Raya, Bekasi, Indonesia
- Prima Dina Atika Universitas Bhayangkara Jakarta Raya, Bekasi, Indonesia (*) Corresponding Author
Abstract
The growth of four-wheeled private vehicle users in Indonesia is quite rapid in the last few years. The problem that then arises from this situation is that not a few vehicle users park their vehicles randomly or not at the right location in the parking area. This is because the driver is a novice driver or an elderly driver so that he is not optimal in predicting the blind-spot area when parking the vehicle. In this study, a prototype of an automatic parking sensor system will be made where the vehicle will receive information on the distance of the vehicle to the surrounding object. The microcontroller in this system uses Arduino UNO R3 and HCR-04 sensor. The software used in this system is designed using the Arduino Uno IDE programming. The system is made with the provisions of placing sensors on the left side of the minibus car (blind-spot area) and a parking system for parallel parking locations (left-right). The system is designed to warn the driver about the distance between the car and surrounding objects by utilizing ultrasonic waves. The distance reading by the sensor is accurate at a distance of 2 – 40 cm. The effective sensor measurement distance is 2-3 cm. With this automatic parking sensor system, it is easier for novice or elderly drivers, as well as other drivers, to park their cars automatically, so that the vehicle parking process becomes faster and more accurate
Downloads
References
H. P. Muhammad Alvin Syahrin, Arini, Husni Teja Sukmana, Anggraeni Endah Kusumaningrum, “Parking Application Using Dual-Layered Geofencing (Circle and Polygon) and Activity Recognition (Case Study: UIN Syarif Hidayatullah Jakarta),” ICONQUHAS 2018. https://www.google.co.id/books/edition/ICONQUHAS_2018/Dj8IEAAAQBAJ?hl=id&gbpv=1&dq=.+Implementasi+Sistem+Perparkiran+Otomatis+dengan+Menentukan+Posisi+Parkir+Berbasis+RFId&pg=PA512&printsec=frontcover (accessed Oct. 08, 2021).
N. Bibi, M. N. Majid, H. Dawood, and P. Guo, “Automatic Parking Space Detection System,” Proc. - 2017 2nd Int. Conf. Multimed. Image Process. ICMIP 2017, vol. 2017-January, pp. 11–15, Dec. 2017, doi: 10.1109/ICMIP.2017.4.
Y. Shao, P. Chen, and T. Cao, “A grid projection method based on ultrasonic sensor for parking space detection,” Int. Geosci. Remote Sens. Symp., vol. 2018-July, pp. 3378–3381, Oct. 2018, doi: 10.1109/IGARSS.2018.8519022.
M. D. K. Aji, “Simulasi Sensor Parkir Menggunakan Ultrasonic Sensor Pada Program Proteus,” Journal.Uny.Ac.Id, 2017, [Online]. Available: https://journal.uny.ac.id/files/journals/93/articles/32354/submission/review/32354-85077-1-RV.pdf.
M. A. B. Nanda, “Pembuatan Sistem Indikator Parkir Berbasis Arduino-Uno R3 Pada Mobil Barang’13,” Universitas Negeri Yogyakarta, 2017.
P. P. D. J. C. Henriques, I. G. A. P. R. Agung, and L. Jasa, “Rancang Bangun Sensor Jarak sebagai Alat Bantu Memarkir Mobil berbasis Mikrokontroler Arduino Uno,” Maj. Ilm. Teknol. Elektro, vol. 17, no. 1, p. 72, 2018, doi: 10.24843/mite.2018.v17i01.p10.
A. Mappa, “SISTEM PARKIR CERDAS SEDERHANA BERBASIS ARDUINO MEGA 2560 Rev3,” Electro Luceat, vol. 4, no. 1, pp. 20–31, 2018, doi: 10.32531/jelekn.v4i1.79.
M. K. Hanifi, “Perancangan Alat Pendeteksi Jarak Pada Mobil Dengan Menggunakan Sensor Ultrasonic Berbasis Arduino,” Universitas Pembangunan Pancabudi Medan, 2019.
M. A.S., Rosa dan Shalahuddin, “Rekayasa Perangkat Lunak Terstruktur dan Berorientasi Objek,” Informatika Bandung. 2016.
A. Dani, “Pengertian Sensor Ultrasonik, Cara Kerja & Fungsinya.” https://wikielektronika.com/pengertian-dan-cara-kerja-sensor-ultrasonik/ (accessed Oct. 11, 2021).
Arduino, “Arduino - Home.” https://www.arduino.cc/ (accessed Oct. 01, 2021).
E. Saputro, “Rancang Bangun Pengaman Pintu Otomatis Menggunakan E-KTP Berbasis Mikrokontroler Atmega328,” J. Tek. Elektro Unnes, vol. 8, no. 1, pp. 1–4, 2016, doi: 10.15294/jte.v8i1.8787.
J. K. Maulidin, A. Hiswara, and R. Sari, “Designing Motorcycle Security System Using E-KTP Sensor and SMS Gateway,” Penelit. Ilmu Komputer, Sist. Embed. Log., vol. 9, no. 28, pp. 161–172, 2021.
A. Septiyanto, J. Warta, and R. Sari, “Aplikasi Pendeteksi Kebocoran Gas LPG Berbasis Wemos ESP8266 Menggunakan Peringatan Notifikasi Pada Whatsapp,” JSRCS (Journal Students Res. Comput. Sci., vol. 2, no. 1, pp. 1–10, 2021.
G. Pitoyo, “Modul Mikrokontroler | PDF.” https://www.scribd.com/document/518134397/modul-mikrokontroler (accessed Oct. 10, 2021).
H. Andrianto, “Pemrograman Mikrokontroler AVR ATmega16,” Informatika, Bandung (2015). https://scholar.google.com/scholar?hl=id&as_sdt=0,5&q=Andrianto,+H.+(2015).+Pemrograman+Mikrokontroler+AVR+ATMEGA16.+Bandung:+Informatika. (accessed Oct. 08, 2021).
D. S. Pemungkas, “Dasar Sistem kendali dengan Simulasi menggunakan LabVIEW - Daniel Sutopo Pamungkas - Google Buku,” Penerbit ANDI Yogyakarta (2017). https://books.google.co.id/books?hl=id&lr=&id=fYM2DwAAQBAJ&oi=fnd&pg=PA23&dq=Daniel+Sutopo+pamungkas,+P.+(2017).+DASAR+SISTEM+KENDALI+DENGAN+SIMULASI+MENGGUNAKAN+LABVIEW.+Bandung:+Informatika+Bandung.&ots=VOvmtodS52&sig=InKFfZ4610adPZwmgzxV-gdP92A&redir_e (accessed Oct. 08, 2021).
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Prototype Sensor Parking Otomatis Pada Area Blind-Spot Kendaraan Menggunakan Mikrokontroler
Pages: 76-84
Copyright (c) 2022 Rafika Sari, Herlawati Herlawati, Fata Nidaul Khasanah, Prima Dina Atika
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
