Transformasi Wavelet Daubechis dan Fuzzy Subspace Clustering untuk Klasifikasi Misalignment pada Motor Induksi
Abstract
Induction motors are the most widely used motors because they are sturdy and inexpensive. However, as the induction motor operates, mechanical damage will occur, one of which is bearing damage. Bearing damage can reach 50% compared to other types of damage. The causes include misalignment when installing the motor with a load or vibration when the motor is operating. In this study, the misalignment phenomenon will be classified based on the level of damage. The damage scenario is 1mm and 1.5mm misalignment. Vibration from normal motor and motor misalignment will be taken using a vibration sensor, then the vibration signal will be transformed using Daubechis wavelet transform. The output in the form of a high frequency signal from the Daubechis wavelet transform will be extracted based on the sum, range, and energy of the signal. Then, the performance of the Fuzzy Subspace Clustering method will be known after testing the data. As a comparison whether the Fuzzy Subspace Clustering method can classify induction motor conditions well, it will be compared with the K-Mean method. The results showed that the combination of Fuzzy Subspace Clustering or K-Means and the first-level Daubechis wavelet transform resulted in the best classification with an accuracy of 95.83%.
Downloads
References
Chourasia, A., Salunke, S., & Saxena, V. (2013). Efficiency Optimization of Three Phase Induction Motor by Slip Compensation: A Review. International Journal of Electronics and Electrical Engineering, 1(4), 308–314. https://doi.org/10.12720/ijeee.1.4.308-314
Saputra, P. P. S., Firmansyah, R., & Irawan, D. (2019). Various and multilevel of coiflet discrete wavelet transform and quadratic discriminant analysis for classification misalignment on three phase induction motor. Journal of Physics: Conference Series, 1367(1). https://doi.org/10.1088/1742-6596/1367/1/012049
Harmouche, J., Delpha, C., & Diallo, D. (2015). Improved fault diagnosis of ball bearings based on the global spectrum of vibration signals. IEEE Transactions on Energy Conversion, 30(1), 376–383. https://doi.org/10.1109/TEC.2014.2341620
O. V. Thorsen and M. Dalva, “Failure identification and analysis forhigh voltage induction motors in the petrochemical industry,” IEEETransactions on Industry Applications, vol. 35, no. 4, pp. 810–818, 1999.
Saputra, P. P. S., Misbah, Ariwinarno, H., & Murdianto, F. D. (2020). Various and multilevel of wavelet transform for classification misalignment on induction motor with quadratic discriminant analysis. Telkomnika (Telecommunication Computing Electronics and Control), 18(2), 961–969. https://doi.org/10.12928/TELKOMNIKA.V18I2.14827.
EPRI, “Improved motors for utility applications,” Publication EL-2678-V1, final report, 1982.
D. A. Asfani, P. P. Surya Saputra, I. M. Yulistya Negara, I. G. N. Satriyadi Hernanda and R. Wahyudi, "Simulation analysis on high impedance temporary short circuit in induction motor winding," 2013 International Conference on QiR, Yogyakarta, 2013, pp. 202-207. doi: 10.1109/QiR.2013.6632565
Tag, Æ. M. E. (2005). Bearing and misalignment fault detection in induction motors by using the space vector angular fluctuation signal, 197–206. https://doi.org/10.1007/s00202-004-0242-6
A. Starr B.K.N. Rao. Condition Monitoring and Diagnostic Engineering Management. Proceedengs of the 14th Intrnational Congress. Elsevier, 2001.
Jee-Hoon Jung, Lee Jong-Jae, Bong-Hwan Kwon, Online Diagnosis of Induction Motors Using MCSA, IEEE Trans. Ind. Electron. 53 (6) (2006) 1842–1852.
G. Acosta, C. Verucchi, E. Celso, A current monitoring system for diagnosing electrical failures in induction motors, Mech. Syst. Signal Process. 20 (4)(2006) 953–965
R. Obaid, T. Hableter, Effect of Load on Detecting Mechanical Faults in Small Induction Motors, in: Proceedings of Symposium on Diagnostics forElectric Machines, Power Electronics and Drives, SDEMPED 2003, Atlanta, 2003, pp. 307–311
Ramana, D. V., Baskar, S., & Info, A. (2017). Incipient Fault Detection of the Inverter Fed Induction Motor, 8(2), 722–729. https://doi.org/10.11591/ijpeds.v8i2.pp722-729
Saputra, P. P. S., Misbah, eliyani, R. Firmansyah, D. Lastomo. (2019). "Haar and Symlet Discrete Wavelete Transform for Identification Misalignment on Three Phase Induction Motor Using Energy Level and Feature Extraction." Journal of Physics: Conference Series 1179: 012093
Anton Asfani, Dimas &Yulistya Negara, I Made & Surya, Pressa. (2015). Short Circuit Detection in Stator Winding Of Three Phase Induction Motor Using Wavelet Transform and Quadratic Discriminant Analysis. 361-366. 10.12792/icisip2015.068.
C. Jettanasen, A. Ngaopitakkul, D. A. Asfani and I. M. Y. Negara, "Fault classification in transformer using low frequency component," 2017 IEEE 10th International Workshop on Computational Intelligence and Applications (IWCIA), Hiroshima, 2017, pp. 199-202. doi: 10.1109/IWCIA.2017.8203584
P. P. S. Saputra, F. D. Murdianto, R. Firmansyah and K. Widarsono, "Combination Of Quadratic Discriminant Analysis And Daubechis Wavelet For Classification Level Of Misalignment On Induction Motor," 2019 International Symposium on Electronics and Smart Devices (ISESD), 2019, pp. 1-5, doi: 10.1109/ISESD.2019.8909431.
Cao, X., Zhou, S., Li, J., & Zhang, S. (2016). Fault Diagnosis in Medium Voltage Drive Based on Combination of Wavelet Transform and Support Vector Machine, 14(4), 1284–1291. https://doi.org/10.12928/TELKOMNIKA.v14i4.4033
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Transformasi Wavelet Daubechis dan Fuzzy Subspace Clustering untuk Klasifikasi Misalignment pada Motor Induksi
Pages: 18-23
Copyright (c) 2021 Pressa Perdana Surya Saputra

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).






















