Analisis Seleksi Penerimaan Karyawan Bank Menggunakan Metode Simple Additive Weighting (SAW) dan Pembobotan Rank Order Centroid (ROC)
- Sri Fitriani Naibaho Universitas Labuhanbatu, Rantauprapat, Indonesia
-
Budianto Bangun
*
Universitas Labuhanbatu, Rantauprapat,
Indonesia
- Masrizal Masrizal Universitas Labuhanbatu, Rantauprapat, Indonesia (*) Corresponding Author
Abstract
This study aims to improve the efficiency and effectiveness of the employee recruitment selection process at Bank BRI Aek Kanopan. The main problem faced is the lack of transparency and systematicity in decision making, so an objective approach is needed to determine the best candidate. As a solution, this study uses the Simple Additive Weighting (SAW) method, which allows structured weighting of criteria, such as last education, technical skills, work experience, communication skills, and age. The SAW method is applied to normalize data and compare candidates based on preference values (Vi). This study involved 25 alternative candidates as evaluation objects, with the normalization and weighting process carried out based on predetermined criteria. The normalized data are presented in a table, with preference values ranging from 0.667 to 0.793, which indicates the level of suitability of candidates to the selection criteria. The results of the study indicate that the SAW method is effective in determining the best candidates, increasing transparency, and facilitating decision making by management. Based on these findings, Bank BRI Aek Kanopan is advised to adopt the SAW method routinely, train staff involved in the selection process, and conduct periodic evaluations to maintain the effectiveness of this method. This research provides an important contribution in the development of human resource management, especially in improving the efficiency and accuracy of the employee recruitment selection process.
Downloads
References
M. P. Daulay, R. E. C. Malau, and N. A. Hasibuan, “Sistem Pendukung Keputusan Penentuan Karyawan Terbaik Berdasarkan Kinerja Menggunakan Metode TOPSIS,” TIN: Terapan Informatika Nusantara, vol. 3, no. 3, pp. 80–87, 2023, doi: 10.47065/tin.v3i3.3640.
R. Y. Simanullang, M. Melisa, and M. Mesran, “Sistem Pendukung Keputusan Penerima Bantuan Covid-19 Menggunakan Metode Simple Additive Weighting (SAW),” TIN: Terapan Informatika Nusantara, vol. 1, no. 9, pp. 451–458, 2021.
I. Susilawati and P. Pristiwanto, “Sistem Pendukung Keputusan Pemilihan Pekerja Buruh Harian Lepas Dengan Menggunakan Metode Waspas (Studi Kasus: PT. Socfin Indonesia),” KOMIK (Konferensi Nasional Teknologi Informasi dan Komputer), vol. 5, no. 1, 2021, doi: 10.30865/komik.v5i1.3737.
A. Yudhistira, “Penerapan Metode Simple Additive Weighting dan Pembobotan Entropy Untuk Penentuan Teknisi Terbaik,” Journal of Artificial Intelligence and Technology Information, vol. 2, no. 3, pp. 143–152, 2024, doi: 10.58602/jaiti.v2i3.133.
J. Eska, A. N. Sari, and H. Hidayatullah, “PENGKLASIFIKASIAN CALON KANDIDAT CUSTOMER SERVICE TERBAIK DENGAN METODE SIMPLE ADDITIVE WEIGHTING (SAW),” JOURNAL OF SCIENCE AND SOCIAL RESEARCH, vol. 6, no. 2, pp. 304–311, 2023, doi: 10.54314/jssr.v6i2.1319.
A. Supiandi, I. T. Kusnadi, and W. Kusnadi, “Penerapan Simple Additive Weighting (SAW) Untuk Sistem Penunjang Keputusan Kenaikan Jabatan Karyawan,” Swabumi, vol. 10, no. 2, pp. 107–114, 2022, doi: 10.31294/swabumi.v10i2.12458.
R. A. Saputri, A. N. Sianturi, S. Mutmainnah, and E. R. Yulia, “Sistem Penunjang Keputusan Penerimaan Karyawan Baru Menggunakan Metode Simple Additive Weighting (Saw) Pada Pt Crestec Indonesia Cikarang,” JIKO (Jurnal Informatika dan Komputer), vol. 6, no. 2, p. 207, 2022, doi: 10.26798/jiko.v6i2.627.
D. Pibriana, “Penggunaan Metode Simple Additive Weighting (SAW) dalam Pengambilan Keputusan Rekrutmen Karyawan Pada PT. ABC,” Techno.Com, vol. 19, no. 1, pp. 45–55, 2020, doi: 10.33633/tc.v19i1.2771.
Y. Yusman, S. Nadriati, and N. Putra, “Sistem Pendukung Keputusan Seleksi Penerimaan Karyawan Pada Pt Pelindo I Mengunakan Metode Simple Additive Weighting (Saw),” Jurnal Digit, vol. 12, no. 1, p. 12, 2022, doi: 10.51920/jd.v12i1.213.
N. D. Apriani, N. Krisnawati, and Y. Fitrisari, “Implementasi Sistem Pendukung Keputusan Dengan Metode SAW Dalam Pemilihan Guru Terbaik,” Journal Automation Computer Information System, vol. 1, no. 1, pp. 37–45, 2021, doi: 10.47134/jacis.v1i1.5.
Z. Sitorus, A. Karim, A. H. Nasyuha, and M. H. Aly, “Implementation of MOORA and MOORSA Methods in Supporting Computer Lecturer Selection Decisions,” JURNAL INFOTEL, vol. 16, no. 3, pp. 554–566, 2024, doi: 10.20895/infotel.v16i3.1184.
S. Suendri, A. M. Harahap, A. B. Nasution, and S. Kartika, “Analisis Sistem Pendukung Keputusan Penentuan Lulusan Terbaik Menggunakan Lima Algoritma Pada Program Studi Sistem Informasi UIN Sumatera Utara Medan,” Al-Ulum: Jurnal Sains Dan Teknologi, vol. 7, no. 1, pp. 38–43, 2022, doi: 10.31602/ajst.v7i1.5839.
R. Y. Simanullang and M. Mesran, “Penerapan Metode Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA) dengan Pembobotan Rank Order Centroid (ROC) Dalam Sistem Pendukung Keputusan Pemilihan Guru Terbaik,” KLIK: Kajian Ilmiah Informatika dan Komputer, vol. 3, no. 5, pp. 466–475, 2023.
Z. Sitorus, F. Kurniawan, E. Hariyanto, and S. Afrizal, “Decision Support System Analysis as a Recommendation for the Program Keluarga Harapan (PKH) Using a Decision Table in Pematang Serai Village,” Bulletin of Information Technology (BIT), vol. 5, no. 3, pp. 203–210, 2024, doi: 10.47065/bit.v5i3.1281.
V. M. M. Siregar, M. R. Tampubolon, E. P. S. Parapat, E. I. Malau, and D. S. Hutagalung, “Decision support system for selection technique using MOORA method,” IOP Conf Ser Mater Sci Eng, vol. 1088, no. 1, pp. 1–5, 2021, doi: 10.1088/1757-899X/1088/1/012022.
A. Qiyamullaily, S. Nandasari, and Y. Amrozi, “Perbandingan penggunaan metode SAW dan AHP untuk sistem pendukung keputusan penerimaan karyawan baru,” Teknika: Engineering and Sains Journal, vol. 4, no. 1, pp. 7–12, 2020.
N. Vafaei, R. A. Ribeiro, and L. M. Camarinha-Matos, “Assessing normalization techniques for simple additive weighting method,” Procedia Comput Sci, vol. 199, pp. 1229–1236, 2022, doi: 10.1016/j.procs.2022.01.156.
E. F. Wati, “Penerapan Metode Simple Additive Weighting (SAW) Dalam Menentukan Lokasi Usaha,” J-SAKTI (Jurnal Sains Komputer dan Informatika), vol. 5, no. 1, pp. 241–245, 2021, doi: 10.30645/j-sakti.v5i1.316.
W. Siregar, M. Masrizal, and I. R. Munthe, “Sistem Pendukung Keputusan Seleksi Perekrutan Kasir Menggunakan Metode Simple Additive Weighting,” Jurnal Tekinkom (Teknik Informasi dan Komputer), vol. 5, no. 2, pp. 218–223, 2022, doi: 10.37600/tekinkom.v5i2.685.
Z. R. Noviana, E. Seniwati, and N. T. Hartanti, “SISTEM PENUNJANG KEPUTUSAN PEMILIHAN MOBIL BEKAS MENGGUNAKAN METODE SAW: STUDI KASUS: BOGEL AUTO,” Journal of Information System Management (JOISM), vol. 6, no. 1, pp. 70–78, 2024, doi: 10.24076/joism.2024v6i1.1676.
C. E. Wijaya and A. Farisi, “Penerapan Metode Fuzzy Simple Additive Weighting Pada Sistem Pendukung Keputusan Karyawan Terbaik,” Jurnal Manajemen Teknologi Dan Sistem Informasi (JMS), vol. 4, no. 1, pp. 260–267, 2024, doi: 10.33998/jms.2024.4.1.1621.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Analisis Seleksi Penerimaan Karyawan Bank Menggunakan Metode Simple Additive Weighting (SAW) dan Pembobotan Rank Order Centroid (ROC)
Pages: 728-740
Copyright (c) 2025 Sri Fitriani Naibaho, Budianto Bangun, Masrizal Masrizal
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
