Implementation of Complex Proportional Assessment and Rank Order Centroid Methods for Selecting Delivery Services
-
Joko Trianto
*
Sekolah Tinggi Teknologi Informasi NIIT, Jakarta,
Indonesia
- Dartono Dartono Institut Teknologi dan Bisnis Swadharma, Jakarta, Indonesia
- Rini Nuraini Universitas Nasional, Jakarta, Indonesia
- Hengki Rusdianto Universitas Muhammadiyah Tangerang, Tangerang, Indonesia (*) Corresponding Author
Abstract
Choosing the right delivery service partner is an important thing for companies to consider. This is because the selection of the right delivery service partner can minimize the risks involved. Generally, choosing a delivery partner service is done by looking at the profile of the freight forwarder's partner. It takes time to determine the right delivery service partner. This study aims to apply the Complex Proportional Assessment (COPRAS) and Rank Order Centroid (ROC) methods in a decision support system for selecting delivery service partners to make it easier to make the right decisions and meet needs. The ROC weighting method is used to determine the value of the criteria based on priority. Meanwhile, the COPRAS approach is used to determine the best solution based on an analysis of the existing options through alternative assessments by providing interval-based utility judgments. In the case study conducted, the best alternative was obtained, namely J&T Express with a score of 100, followed by JNE Express with a value of 92.09, SiCepat with a value of 91.89, Ninja Express with a value of 91.42. The COPRAS calculation results on the system developed with the manual calculation results show the same value, this means that the calculations on the system are valid. The usability scores, on the other hand, have an average value of 88.33% and are considered good
Downloads
References
A. E. Putro, Manajemen Kurir dalam Perspektif Proses Bisnis. Pekalongan: Penerbit NEM, 2022.
M. F. Zulfikar and M. K. Sujono, Manajemen Pengiriman Barang Paket di PT Pos Indonesia. Jombang: Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas KH. A. Wahab Hasbullah, 2021.
R. I. Borman, M. Mayangsari, and M. Muslihudin, “Sistem Pendukung Keputusan Menentukan Lokasi Perumahan Di Pringsewu Selatan Menggunakan Fuzzy Multiple Attribute Decision Making,” JTKSI (Jurnal Teknol. Komput. dan Sist. Informasi), vol. 01, no. 01, pp. 5–9, 2018, doi: 10.56327/jtksi.v1i1.874.
R. T. Sutton, “An overview of clinical decision support systems: benefits, risks, and strategies for success,” npj Digit. Med., vol. 17, pp. 1–10, 2020, doi: 10.1038/s41746-020-0221-y.
M. Cinelli, M. Kadzi, G. Miebs, M. Gonzalez, and R. Słowi, “Recommending multiple criteria decision analysis methods with a new taxonomy-based decision support system,” Eur. J. Oper. Res., vol. 302, pp. 633–651, 2022, doi: 10.1016/j.ejor.2022.01.011.
R. I. Borman, D. A. Megawaty, and A. Attohiroh, “Implementasi Metode TOPSIS Pada Sistem Pendukung Keputusan Pemilihan Biji Kopi Robusta Yang Bernilai Mutu Ekspor (Studi Kasus: PT. Indo Cafco Fajar Bulan Lampung),” Fountain Informatics J., vol. 5, no. 1, pp. 14–20, 2020, doi: 10.21111/fij.v5i1.3828.
S. Wasiyanti and A. Putri, “Pemilihan Jasa Pengiriman Barang Menggunakan Metode Simple Additive Weighting (SAW),” SATIN - Sains dan Teknol. Inf., vol. 6, no. 1, pp. 10–19, 2020, doi: 10.33372/stn.v6i1.577.
R. Risnawati and N. Manurung, “Sistem Pendukung Keputusan Dalam Penentuan Mitra Jasa Pengiriman Barang Terbaik Di Kota Kisaran Menggunakan Metode TOPSIS,” JURTEKSI (Jurnal Teknol. dan Sist. Informasi), vol. 5, no. 2, pp. 133–138, 2019, doi: 10.33330/jurteksi.v5i2.357.
R. F. Siregar, “Sistem Pendukung Keputusan Pemilihan Mitra Jasa Pengiriman Barang PT. Global Jet Express (JNT) Pada Cabang Medan Johor Dengan Metode MOORA,” J. CyberTech, vol. 2, no. 4, pp. 1–11, 2019.
D. Kang, R. Jaisankar, V. Murugesan, and K. Suvitha, “A novel MCDM approach to selecting a biodegradable dynamic plastic product: a probabilistic hesitant fuzzy set-based COPRAS method,” J. Environ. Manage., vol. 340, no. 117967, pp. 1–10, 2023, doi: 10.1016/j.jenvman.2023.117967.
S. B. Patil, T. A. Patole, R. S. Jadhav, S. S. Suryawanshi, and S. J. Raykar, “Complex Proportional Assessment (COPRAS) based Multiple-Criteria Decision Making (MCDM) paradigm for hard turning process parameters,” Mater. Today Proc., vol. 59, pp. 835–840, 2022, doi: 10.1016/j.matpr.2022.01.142.
L. Irvana and N. Mariana, “Penerapan Metode COPRAS Untuk Pemilihan SMK Jurusan TKJ Kota Semarang,” J. SISFOKOM (Sistem Inf. dan Komputer), vol. 11, no. 2, pp. 201–207, 2022.
R. P. Saragih, S. M. Tondang, D. Pratiwi, A. Wanto, and A. P. Windarto, “Analisis Metode COPRAS Dalam Pemilihan Tempat Usaha Kuliner Berdasarkan Penilaian Konsumen,” CSRID (Computer Sci. Res. Its Dev. Journal), vol. 13, no. 3, pp. 263–272, 2021.
M. Mesran, T. M. Diansyah, and F. Fadlina, “Implemententasi Metode Rank Order Centroid (ROC) dan Operational Competitiveness Rating Analysis (OCRA) dalam Penilaian Kinerja Dosen Komputer Menerapkan ( Studi Kasus: STMIK Budi Darma ),” in Prosiding Seminar Nasional Riset Information Science (SENARIS), 2019, pp. 822–834.
I Made Arya Budhi Saputra, “Penentuan Lokasi Stup Menggunakan Pembobotan Rank Order Centroid (ROC) dan Simple Additive Weighting (SAW),” J. Sist. dan Inform., vol. 15, no. 1, pp. 48–53, 2020, doi: 10.30864/jsi.v15i1.340.
R. I. Borman, A. T. Priandika, and A. R. Edison, “Implementasi Metode Pengembangan Sistem Extreme Programming (XP) pada Aplikasi Investasi Peternakan,” JUSTIN (Jurnal Sist. dan Teknol. Informasi), vol. 8, no. 3, pp. 272–277, 2020, doi: 10.26418/justin.v8i3.40273.
R. D. Gunawan, R. Napianto, R. I. Borman, and I. Hanifah, “Penerapan Pengembangan Sistem Extreme Programming Pada Aplikasi Pencarian Dokter Spesialis di Bandar lampung Berbasis Android,” J. Format, vol. 8, no. 2, pp. 148–157, 2019.
I. Ahmad, A. T. Prastowo, E. Suwarni, and R. I. Borman, “Pengembangan Aplikasi Online Delivery Sebagai Upaya Untuk Membantu Peningkatan Pendapatan,” JMM (Jurnal Masy. Mandiri), vol. 5, no. 6, pp. 4–12, 2021.
I. Ahmad, Y. Rahmanto, D. Pratama, and R. I. Borman, “Development of augmented reality application for introducing tangible cultural heritages at the lampung museum using the multimedia development life cycle,” Ilk. J. Ilm., vol. 13, no. 2, pp. 187–194, 2021.
M. Akbar, Q. Quraysh, and R. I. Borman, “Otomatisasi Pemupukan Sayuran Pada Bidang Hortikultura Berbasis Mikrokontroler Arduino,” J. Tek. dan Sist. Komput., vol. 2, no. 2, pp. 15–28, 2021.
Y. Fernando, R. Napianto, and R. I. Borman, “Implementasi Algoritma Dempster-Shafer Theory Pada Sistem Pakar Diagnosa Penyakit Psikologis Gangguan Kontrol Impuls,” Insearch (Information Syst. Res. J., vol. 2, no. 2, pp. 46–54, 2022.
M. I. Farouqi, I. Aknuranda, and A. D. Herlambang, “Evaluasi Usability Pada Aplikasi UBER Menggunakan Pengujian Usability,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2, no. 9, pp. 2599–2606, 2018.
A. Fathurrozi, A. Damuri, A. T. Prastowo, and Y. Rahmanto, “Sistem Pendukung Keputusan Pemilihan Lahan Tanaman Kopi Menggunakan Metode Complex Proportional Assessment (COPRAS),” KLIK Kaji. Ilm. Inform. dan Komput., vol. 3, no. 3, pp. 228–237, 2022.
M. D. Irawan, H. Situmorang, R. Sitanggang, and D. Sawitri, “Sistem Pendukung Keputusan Untuk Menentukan Mutasi Pegawai Menggunakan Metode COPRAS,” CESS (Journal Comput. Eng. Syst. Sci., vol. 8, no. 1, pp. 220–234, 2023.
R. I. Borman and Y. Purwanto, “Impelementasi Multimedia Development Life Cycle pada Pengembangan Game Edukasi,” JEPIN (Jurnal Edukasi dan Penelit. Inform., vol. 5, no. 2, pp. 119–124, 2019.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Implementation of Complex Proportional Assessment and Rank Order Centroid Methods for Selecting Delivery Services
Pages: 354−363
Copyright (c) 2023 Joko Trianto, Dartono, Rini Nuraini, Hengki Rusdianto
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
