Analisis Penerapan Metode Multi Objective Optimization on the Basis of Ratio Analysis (MOORA) dan Metode Weighted Aggregated Sum Product Assessment (WASPAS) pada Pemilihan Mekanik Sepeda Motor Terbaik
- Venny Novita Sari Universitas Dehasen Bengkulu, Bengkulu, Indonesia
- Rizka Tri Alinse Universitas Dehasen Bengkulu, Bengkulu, Indonesia
-
Achmad Fikri Sallaby
*
Universitas Dehasen Bengkulu, Bengkulu,
Indonesia
(*) Corresponding Author
Abstract
A company engaged in the sale and repair of motorcycles, of course, requires a reliable and responsible mechanic in his work, for that a motorcycle mechanic is needed in accordance with the terms and conditions required by the motorcycle company. Many mechanics are now opening motorbike repair services, after repairing the motorbike it becomes even worse than before it was repaired, so that it can harm consumers of the repair service. This is because a mechanic only has desperate capital without any experience and abilities that can be guaranteed. Therefore, in selecting the best mechanic, a decision support system is needed with various methods that can be used, such as the TOPSIS method, VIKOR, MOSRA, AHP, MOORA, WASPAS, WP and so on. In this study, the methods used are Multi Objective Optimization On The Basis Of Ratio Analysis (MOORA) and Weighted Aggregated Sum Product Assessment (WASPAS) methods. Each alternative will be assessed based on the criteria for Trouble Shooting, Working Time, Education and Warning Letter, then the process of compiling or ranking each alternative is carried out, so that the best alternative or motorcycle mechanic is obtained. The results after applying the MOORA method, namely alternative A2 is the best mechanic with a value of 1.637 and the WASPAS method is the best mechanic in Q2 with alternative A2 with a value of 0.834. Both methods produce the same results, namely the best mechanic is A2
Downloads
References
T. H. B. Aviani and A. T. Hidayat, “Sistem Pendukung Keputusan Seleksi Pemberian Uang Kuliah Tunggal Menerapkan Metode WASPAS,” J. Sist. Komput. dan Inform., vol. 2, no. 1, pp. 102–109, 2020.
A. Revi, I. Parlina, and S. Wardani, “Analisis Perhitungan Metode MOORA dalam Pemilihan Supplier Bahan Bangunan di Toko Megah Gracindo Jaya,” InfoTekJar J. Nas. Inform. dan Teknol. Jar., vol. 3, no. 1, pp. 95–99, 2018.
R. T. Aldisa, A. Priyatna, F. Saidah, K. Y. Siahaan, and Mesran, “Analisis Perbandingan Penerapan Metode MOORA dan SAW dalam,” J. Sist. Komput. dan Inform., vol. 3, no. 4, pp. 393–404, 2022.
M. Safii and A. Zulhamsyah, “Sistem Pendukung Keputusan Pemilihan Mekanik Sepeda Motor Yamaha Alfascorfii Dengan Metode Multi Objective Optimization On The Basis Of Ratio Analysis (MOORA),” J-SAKTI (Jurnal Sains Komput. dan Inform., vol. 2, no. 2, p. 162, 2018.
F. D. Simamora, L. R. Zebua, and H. S. Simorangkir, “Sistem Pendukung Keputusan Pemilihan Mekanik Terbaik Menerapkan Metode WASPAS,” in Seminar Nasional Sains dan Teknologi Informasi (SENSASI), 2018, vol. 1, no. 1.
L. Cahyani, M. Arif, and F. Ningsih, “Sistem Pendukung Keputusan Pemilihan Mahasiswa Berprestasi Menggunakan Metode MOORA (Studi Kasus Fakultas Ilmu Pendidikan Universitas Trunojoyo Madura),” J. Ilm. Edutic, vol. 5, no. 2, pp. 108–114, 2019.
C. Fadlan, A. P. Windarto, and I. S. Damanik, “Penerapan Metode MOORA pada Sistem Pemilihan Bibit Cabai (Kasus: Desa Bandar Siantar Kecamatan Gunung Malela),” J. Appl. Informatics Comput., vol. 3, no. 2, pp. 42–46, 2019.
N. K. Daulay, B. Intan, and M. Irvai, “Comparison of the WASPAS and MOORA Methods in Providing Single Tuition Scholarships,” IJICS (International J. Informatics Comput. Sci., vol. 5, no. 1, pp. 84–94, 2021.
A. T. Hidayat, N. K. Daulay, and Mesran, “Penerapan Metode Multi-Objective Optimization on The Basis of Ratio Analysis (MOORA) dalam Pemilihan Wiraniaga Terbaik,” J. Comput. Syst. Informatics, vol. 1, no. 4, pp. 367–372, 2020.
M. and S. N. W. Al-Hafiz, “Sistem Pendukung Keputusan Penentukan Kredit Pemilikan Rumah Menerapkan MOORA,” vol. 1, pp. 306–309, 2017.
R. P. Sari and A. M. Alliandaw, “Penerapan Metode MOORA Pada Sistem Penentuan Penerimaan Bidikmisi UNTAN,” vol. 11, pp. 242–250, 2022.
S. W. Pasaribu, E. Rajagukguk, M. Sitanggang, R. Rahim, and L. A. Abdillah, “Implementasi Multi-Objective Optimization On The Basis Of Ratio Analysis ( MOORA ) Untuk Menentukan Kualitas Buah Mangga Terbaik,” J. Ris. Komput., vol. 5, no. 1, pp. 50–55, 2018.
J. Afriany, L. Ratna, S. Br, I. Julianty, and E. L. Nainggolan, “Penerapan MOORA Untuk Mendukung Efektifitas Keputusan Manajemen Dalam Penentuan Lokasi SPBU,” vol. 5, no. 2, pp. 161–166, 2018.
A. P. R. Pinem, H. Indriyawati, and B. A. Pramono, “Sistem Pendukung Keputusan Penentuan Lokasi Industri Berbasis Spasial Menggunakan Metode MOORA,” JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 7, no. 3, pp. 639–646, 2020.
R. F. Wahyu, F. Gea, and M. Mesran, “Sistem Pendukung Keputusan Pemilihan Karyawan Terbaik Parking Area Menerapkan Metode MOORA,” Bull. Inf. Technol., vol. 2, no. 3, pp. 107–118, 2021.
N. K. Daulay, “Penerapan Metode Waspas Untuk Efektifitas Pengambilan Keputusan Pemutusan Hubungan Kerja,” J. Sist. Komput. dan Inform., vol. 2, no. 2, pp. 196–201, 2021.
K. A. Chandra and S. Hansun, “Sistem Rekomendasi Pemilihan Laptop Dengan Metode Waspas,” J. Ecotipe (Electronic, Control. Telecommun. Information, Power Eng., vol. 6, no. 2, pp. 76–81, 2019.
S. M. Harahap, I. J. T. Situmeang, S. Hummairoh, and Mesran, “Implementation of Weighted Aggregated Sum Product Assessment (WASPAS) in Determining the Best Graduates,” IJICS (International J. Informatics Comput. Sci., vol. 5, no. 1, pp. 44–51, 2021.
R. Manurung, Fitriani, Retnowati Sitanggang, F. T. Waruwu, and Fadlina, “Penerapan Metode Weighted Aggregated Sum Product Assesment ( WASPAS ) Dalam Keputusan Penerimaan Beasiswa Bidik Misi,” JURIKOM (Jurnal Ris. Komputer), vol. 5, no. 1, pp. 148–151, 2018.
G. Ginting, M. Mesran, and K. Ulfa, “Sistem Pendukung Keputusan Pemilihan Beasiswa Pasca Sarjana Menerapkan Metode Analytic Hierarchy Process(AHP) dan Weight Aggregated Sum Product Assessment(WASPAS) (StudiKasus: STMIK Budi Darma),” Pros. Semin. Nas. Ris. Inf. Sci., vol. 1, no. 0, pp. 834–845, Sep. 2019.
D. P. U. Samuel Damanik, “Implementasi Metode ROC Dan Waspas pada Sistem Pendukung Keputusan seleksi Kerjasama Vendor,” … Teknol. Inf. dan …, vol. 4, pp. 242–248, 2020.
R. Khalida, B. Bangun, M. Mesran, and N. Oktari, “Penerapan Metode ROC dan Weighted Aggregated Sum Product Assesment (WASPAS) dalam Penerimaan Asisten Perkebunan,” J. Media Inform. Budidarma, vol. 5, no. 3, p. 937, 2021.
S. Urosevic, D. Karabasevic, D. Stanujkic, and M. Maksimovic, “An approach to personnel selection in the tourism industry based on the SWARA and the WASPAS methods,” Econ. Comput. Econ. Cybern. Stud. Res., vol. 51, no. 1, 2017.
A. Triayudi, “Penerapan Metode VIKOR dan WASPAS Dalam Pemilihan Handphone Bekas,” Build. Informatics, Technol. Sci., vol. 4, no. 2, pp. 1072–1082, 2022.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Analisis Penerapan Metode Multi Objective Optimization on the Basis of Ratio Analysis (MOORA) dan Metode Weighted Aggregated Sum Product Assessment (WASPAS) pada Pemilihan Mekanik Sepeda Motor Terbaik
Pages: 1301−1308
Copyright (c) 2022 Achmad Fikri Sallaby
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
