Implementation of the Simple Additive Weighting Method in Determining Recipients of Subsidized Food Materials for Poor Families
- Kusmanto Kusmanto Universitas Alwashliyah Labuhanbatu, Rantoprapat, Indonesia
-
Eko Setia Budi
*
Universitas Nusa Mandiri, Jakarta,
Indonesia
- Samsir Samsir Universitas Alwashliyah Labuhanbatu, Rantoprapat, Indonesia
- Elvia Hariska Universitas Budi Darma, Medan, Indonesia
- Guidio Leonarde Ginting Universitas Budi Darma, Medan, Indonesia (*) Corresponding Author
Abstract
In accordance with the rules that have been set from the Village Office so that the community gets subsidized food, it must comply with the specified criteria. The Village Office will determine who is selected to receive subsidized food and distribute it to poor families. As a tool that can be used to determine someone who is eligible to receive subsidized food, a decision support system is needed. In the decision support system there are several methods, one of which can be used is the SAW (Simple Additive Weighting) method. In this research
Downloads
References
A. Rusmayanti, “Sistem Informasi Pengelolaan Keuangan Pada Desa Ngadirejan,” J. Speed – Sentra Penelit. Eng. dan Edukasi, vol. 6, no. 2, pp. 35–39, 2014.
R. M. Simanjorang, H. D. Hutahaean, H. T. Sihotang, and T. Informatika, “Sistem pendukung keputusan penentuan penerima bahan pangan bersubsidi untuk keluarga miskin dengan metode ahp pada kantor kelurahan mangga,” J. Inform. Pelita Nusant., vol. 2, no. 1, pp. 22–31, 2017.
T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.
D. Nofriansyah, Multi Criteria Decision Making (MCDM) Pada Sistem Pendukung Keputusan. Yogyakarta: CV.Budi Utama, 2017.
Efraim Turban and Jay E. Aronson, Decision Support System and Intelligent Systems. 2001.
M. K. Muhammad Decky Andani , Yeka Hendriyani, S.Kom., “PERANCANGAN SISTEM PENDUKUNG KEPUTUSAN PENENTUAN PENERIMA BANTUAN DAERAH BERDASARKAN TARAF HIDUP MASYARAKAT MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING (SAW) (STUDI KASUS : DESA MEDAN JAYA) Muhammad,” J. Vokasional Tek. Elektron. dan Inform., vol. 6, no. 2, 2018.
Mesran, E. P. Sumantri, Supriyanto, S. H. Sahir, and N. K. Daulay, “Implementation of Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) in Recommendations for New Position in Companies,” Int. J. Inf. Syst. Technol., vol. 4, no. 2, pp. 661–669, 2021.
M. Handayani, “Sistem pendukung keputusan penentuan penerimaan raskin di menggunakan metode topsis,” J. Teknol. Inf., vol. 1, pp. 54–60, 2017.
H. A. F. (Magister T. I. S. A. Y. Helilintar, Risa, Wing Wahyu Winarno, “Penerapan Metode SAW dan Fuzzy Dalam Sistem Pendukung Keputusan Penerimaan Beasiswa in Decision Support System Scholarship,” Citec J., vol. 3, no. 2, pp. 89–101, 2016.
D. W. Prabowo and J. M. I. R. R. N. . J. P. dwi_wp@yahoo. c. Pusat Kebijakan Perdagangan Dalam Negeri, BP2KP, Kementerian Perdagangan - RI, “PENGELOMPOKAN KOMODITI BAHAN PANGAN POKOK DENGAN METODE ANALYTICAL HIERARCHY PROCESS Classification of Staple Food Commodity Using Analytical Hierarchy Process,” pp. 163–182, 2014.
R. S. P. L. Tri Susilowati, “SISTEM PENDUKUNG KEPUTUSAN SELEKSI PENERIMAAM CALON SISWA BARU PADA SMA MUHAMADIYAH 1 PRINGSEWU DENGAN,” pp. 12–21.
I. J. T. Situmeang, S. Hummairoh, S. M. Harahap, and Mesran, “Application of SAW ( Simple Additive Weighting ) for the Selection of Campus Ambassadors,” IJICS (International J. Informatics Comput. Sci., vol. 5, no. 1, pp. 21–28, 2021.
M. R. Ramadhan, M. K. Nizam, and Mesran, “Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Siswa-Siswi Berprestasi Pada Sekolah SMK Swasta Mustafa,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 459–471, 2021.
R. Y. Simanullang, Melisa, and Mesran, “Sistem Pendukung Keputusan Penerima Bantuan Covid-19 Menggunakan Metode Simple Additive Weighting (SAW),” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 2–9, 2021.
S. K. Simanullang and A. G. Simorangkir, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,” TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 472–478, 2021.
S. H. Sahir, R. Rosmawati, and K. Minan, “Simple Additive Weighting Method to Determining Employee Salary Increase Rate,” Int. J. Sci. Res. Sci. Technol., vol. 3, no. 8, pp. 42–48, 2017.
R. T. Utami, D. Andreswari, and Y. Setiawan, “Implementasi Metode Simple Additive Weighting (SAW) Dengan Pembobotan Rank Order Centroid (ROC) Dalam Pengambilan Keputusan Untuk Seleksi Pengguna Jasa Leasing Mobil (Studi Kasus: PT. Multindo Auto Finance Cabang Bengkulu),” J. Rekursif, vol. 4, no. 2, pp. 209–221, 2016.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Implementation of the Simple Additive Weighting Method in Determining Recipients of Subsidized Food Materials for Poor Families
Pages: 384-392
Copyright (c) 2021 Kusmanto Kusmanto, Eko Setia Budi, Samsir Samsir, Elvia Hariska, Guidio Leonarde Ginting
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
