Pengecekan Bit Error Pada Media Transmisi Pengiriman Gambar Menggunakan Metode Hamming Code
-
Deli Alvinda
*
STMIK Kaputama, Binjai,
Indonesia
- Achmad Fauzi STMIK Kaputama, Binjai, Indonesia
- Husnul Khair STMIK Kaputama, Binjai, Indonesia (*) Corresponding Author
Abstract
The successful delivery of information from the sender (transmitter) to the receiver (receiver) is one thing that is very important in determining the reliability of a communication system. In the world of communication, both communication using cables or using air as a transmission medium will inevitably experience disturbances in the communication process caused by a disturbance called noise. Noise is an unwanted electrical signal. The addition of this unwanted signal in a communication process is a major limiting factor in data communication systems. In the process of data communication, the possibility of data errors received can occur because the data becomes an error and must be re-sent. Hamming code is an error detection method that is able to detect several errors, but is only able to correct one error (single error correction). This error detection method is very suitable for use in situations where there are several random errors.
References
[2] Muhajir, F., Efendi, S., & Sutarman, &. (2016). DETEKSI DAN KOREKSI MULTI BIT ERROR DENGAN PARTITION HAMMING CODE. In Jurnal Teknovasi (Vol. 03, Issue 2).
[3] Fajar Andana, A., Rizqika Akbar, S., & Maulana, R. (2018). Implementasi Deteksi Dan Koreksi Error Pada Komunikasi Serial Arduino Berbasis UART Dengan Metode Hamming Code (Vol. 2, Issue 11).
[4] Firman, A., Wowor, H. F., Najoan, X., Teknik, J., Fakultas, E., & Unsrat, T. (2016). Sistem Informasi Perpustakaan Online Berbasis Web. 5(2).
[5] Lavarino, D., & Yustanti, Wi. (2016). Rancang Bangun E - Voting Berbasis Website Di Universitas Negeri Surabaya. Jurnal Manajemen Informatika, 18(2), 22280.
[6] Rasim, Setiawan, W., & Rahman, eka fitrajaya. (2008). Metodologi Pembelajaran Berbasis Komputer Dalam Upaya Menciptakan Kultur Pembelajaran Berbasis Teknologi Informasi dan Komunikasi. Pendidikan Teknologi Informasi Dan Komunikasi, 1, 1–17.
[7] Wiliani, N., & Syadid, Z. (2017). Rancang Bangun Aplikasi Kasir Tiket Nonton Bola Bareng Pada X Kasir Di Suatu Lokasi X Dengan Visual Basic 2010 Dan MySql. 6(2), 77–83.
[8] Masri, M., Alam, H., Masri, M., Lubis, Z., & Izhni Pohan, M. (2019). SIMULASI BYTE ERROR CORRECTION DENGAN MENGGUNAKAN HAMMING CODE. In Journal of Electrical Technology (Vol. 4, Issue 3).
[9] Susilawati, H., & Sunardi, D. (2017). MENGGUNAKAN METODE HAMMING CODE PADA PROSES PEGIRIMAN DATA BERBASIS ANDROID (Vol. 8, Issue 1).
[10] Parinduri, I., & Hutagalung, S. N. (2018). Seminar Nasional Royal (SENAR) 2018 ISSN 2622-9986 (cetak) STMIK Royal-AMIK Royal, hlm. 215-218 ISSN 2622-6510 (online) Kisaran, Asahan.
[11] Fauzi, A., & Putri Rahayu, R. (2021). IMPLEMENTATION OF THE HAMMING CODE METHOD IN BIT DATA IMPROVEMENT TRANSMISSION PROCESS. JIK), 5(1).
[12] Sembiring, M., & Haris Simbolon, F. (2021). Perancangan Perangkat Lunak Pembelajaran Algoritma Hamming Code dalam Mencari Bit Error pada Komunikasi Data. 1(1), 2798–9593.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Pengecekan Bit Error Pada Media Transmisi Pengiriman Gambar Menggunakan Metode Hamming Code
Pages: 159-163
Copyright (c) 2022 Deli Alvinda, Achmad Fauzi, Husnul Khair
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
