Penerapan Fuzzy Logic Pada Sistem Pintu Otomatis Menggunakan Sidik Jari Berbasis Arduinno Uno
- Iwan Fitrianto Rahmad Universitas Potensi Utama, Medan, Indonesia
-
Juanda Hakim Lubis
*
Universitas Pembinaan Masyarakat Indonesia, Medan,
Indonesia
- Khairul Ummi Universitas Potensi Utama, Medan, Indonesia
- M. Ridho Akbar Universitas Potensi Utama, Medan, Indonesia (*) Corresponding Author
Abstract
The door security system using fingerprint is one of the many systems that is often used to add a level of security to school, home and other doors. The door system uses fingerprints as a medium to read or identify so that the door can be opened. Automatic doors with a fingerprint recognition system are a modern solution for securing access to various locations. The implementation of Fuzzy Logic in this tool is used to provide a delay time of 3 seconds in the open state based on the number of fingerprints attached. Arduino Uno functions as the main controller that integrates the fingerprint module and door actuator. The result of this research is a door security system tool that applies a fuzzy logic algorithm and includes a hardware and software design process, including integration of electronic components and development of a fingerprint verification algorithm. Implementation The experimental method is used to test the reliability of the system in user recognition and access. Experimental results show that the system can identify users with high accuracy and provide a fast response in operating the automatic door. The practical contribution of this research is the development of automatic door technology that can be applied in various contexts to increase user safety and comfort.
Downloads
References
S. D. Dayanti, “Perancangan Pintu Otomatis Menggunakan Metode Fuzzy Logic Control,” Pelita Inform. Inf. dan Inform., vol. 7, no. 4, pp. 579–583, 2019.
D. Suyoko, “Alat Pengaman Pintu Rumah Menggunakan RFID (Radio Frequency Identification) 125KHz Berbasis Mikrokontroler ATmega328,” Skripsi. Progr. Stud. Tek. Elektron. Univ. Negeri Yogyakarta. Yogyakarta, 2012.
L. A. Denoia and A. L. Olsen, “RFID and Application Security,” J. Res. Pract. Inf. Technol., vol. 41, p. 209, 2009, [Online]. Available: https://api.semanticscholar.org/CorpusID:61109935
W. Gatri, R. Y. Mesu, N. Allu, and E. T. S. Lobo, “Perancangan Pintu Otomatis Dengan Fingerprint Berbasis Arduino Uno Pada Perpustakaan Teknik Elektro UKI Paulus Makassar,” in Prosiding Seminar Nasional Sinergitas Multidisiplin Ilmu Pengetahuan dan Teknologi, 2024, pp. 16–18.
A. S. Puspaningrum, F. Firdaus, I. Ahmad, and H. Anggono, “Perancangan Alat Deteksi Kebocoran Gas Pada Perangkat Mobile Android Dengan Sensor Mq-2,” J. Teknol. Dan Sist. Tertanam, vol. 1, no. 1, pp. 1–10, 2020.
N. K. Ginting, “Rancang Bangun Pintu Otomatis Menggunakan Sensor KC7783R Berbasis Mikrokontroller Arduino Nano,” 2021, Universitas Sumatera Utara.
F. Kurniawan and A. Surahman, “Sistem Keamanan Pada Perlintasan Kereta Api Mengunakan Sensor Infrared Berbasis Mikrokontroller Arduino Uno,” J. Teknol. Dan Sist. Tertanam, vol. 2, no. 1, pp. 7–12, 2021.
R. Genaldo, T. Septyawan, A. Surahman, and P. Prasetyawan, “Sistem Keamanan Pada Ruangan Pribadi Menggunakan Mikrokontroler Arduino dan SMS Gateway,” J. Tek. Dan Sist. Komput., vol. 1, no. 2, pp. 46–52, 2020.
P. E. S. Dita, A. Al Fahrezi, P. Prasetyawan, and A. Amarudin, “Sistem Keamanan Pintu Menggunakan Sensor Sidik Jari Berbasis Mikrokontroller Arduino UNO R3,” J. Tek. Dan Sist. Komput., vol. 2, no. 1, pp. 121–135, 2021.
I. Publik, “Apa Itu Arduino Uno, Sprsifikasi, Fungsi Hingga Contoh Projectnya,” Diakses pada, vol. 7, 2021.
P. Tarigan, “Perancangan Alat Simulator Kontroler Lampu Rumah Berbasis Komputerisasi dengan Menggunakan Metode Fuzzy Logic Control,” J. Pelita Inform. Budi Darma, vol. 3, pp. 56–62, 2013.
S. Susilo, “Perancangan Solar Tracker Sebagai Peningkatan Efisiensi Energi Listrik Yang Dihasilkan Panel Surya Dengan Menggunakan Logika Kabur (Fuzzy Logic),” 2012.
H. Nurhasanah, D. D. Damayanti, and M. D. Akbar, “MODELING KEBIJAKAN STAFFING, CROSS-TRAINING, TOUR SCHEDULING, DAN ASSIGNMENT IT SUPPORT CONTACT CENTER DENGAN MEMPERTIMBANGKAN SKILL SET.,” J. Syntax Lit., vol. 8, no. 9, 2023.
J. K. Siahaan, “Analisa Tingkat Trauma Kecelakaan dengan Menerapkan Metode Fuzzy Mamdani,” J. Pharm. Heal. Res., vol. 1, no. 1, pp. 21–26, 2020.
R. Lestari, “Penerapan Algoritma Fuzzy Logic pada Sistem Pengaman Pintu Menggunakan E-KTP Berbasis Arduino Uno R3,” 2023, Fakultas Teknik Universitas Islam Sumatera Utara.
A. M. V. Sianipar, S. Solikhun, W. Saputra, I. Parlina, and Z. M. Nasution, “Sistem Pengamanan Pintu Menggunakan E-Ktp Berbasis Arduino Uno Mega2560,” J. Resist. (Rekayasa Sist. Komputer), vol. 4, no. 2, pp. 127–133, 2021.
D. P. Hapsari, N. Karimah, and F. T. I. ITS, “Sistem pendukung keputusan peramalan cuaca dengan menggunakan logika fuzzy mamdani,” J. IPTEK, vol. 16, no. 1, 2012.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Fuzzy Logic Pada Sistem Pintu Otomatis Menggunakan Sidik Jari Berbasis Arduinno Uno
Pages: 20-28
Copyright (c) 2024 Iwan Fitrianto Rahmad, Juanda Hakim Lubis, Khairul Ummi, M. Ridho Akbar
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
