Smart Farm Hydroponics berbasis IOT dengan NodeMCU ESP8266
- Rahmad Doni Universitas Potensi Utama, Medan, Indonesia
-
Iwan Fitrianto Rahmad
*
Universitas Potensi Utama, Medan,
Indonesia
(*) Corresponding Author
Abstract
The development of information technology is increasing rapidly from time to time, information technology can be felt directly by humans and has experienced significant changes in several sectors of life. One form of progress in the field of information technology is the Internet of Things (IoT) platform. Agriculture is an important sector for people's lives. Hydroponics is a method in agriculture that can cultivate plants without the need for land, but uses water and nutrient solutions as a planting medium. This hydroponic cultivation has many advantages including more practical maintenance and more controlled pest disturbances, does not depend on natural conditions, and can be done on limited land. To optimize agricultural products, farmers need to get nutritional conditions, solution pH and temperature in real time to be able to make the right decisions for what crops to plant. The process of decreasing the temperature from 360 Celsius to 340 Celsius lasts ± 3 minutes. And the provision of plant nutrition is carried out by order through the Blynk application.
Downloads
References
A. Pangestu, A. Ziky Iftikhor, Damayanti, M. Bakri, and M. Alfarizi, “Sistem Rumah Cerdas Berbasis Iot Dengan Mikrokontroler Nodemcu Dan Aplikasi Telegram,” Jtikom, vol. 1, no. 1, pp. 8–14, 2020.
H. S. Bedi, K. V. K. Raju, M. V. Sriram, H. Khoisnam, K. Jahnavi, and P. N. Sai, “Design and implementation of IoT Based Smart Parking System using NodeMCU ESP8266,” Int. J. Mech. Eng., vol. 7, no. 5, pp. 1–6, 2022.
M. A. Prasetyo and H. K. Wardana, “Rancang Bangun Monitoring Solar Tracking System Menggunakan Arduino dan Nodemcu Esp 8266 Berbasis IoT,” Resist. (Elektronika Kendali Telekomun. Tenaga List. Komputer), vol. 4, no. 2, p. 163, 2021, doi: 10.24853/resistor.4.2.163-168.
S. Siswanto, T. Nurhadiyan, and M. Junaedi, “Prototype Smart Home Dengan Konsep Iot (Internet of Thing) Berbasis Nodemcu Dan Telegram,” J. Sist. Inf. dan Inform., vol. 3, no. 1, pp. 85–93, 2020, doi: 10.47080/simika.v3i1.850.
A. Ambarwari, Dewi Kania Widyawati, and Anung Wahyudi, “Sistem Pemantau Kondisi Lingkungan Pertanian Tanaman Pangan dengan NodeMCU ESP8266 dan Raspberry Pi Berbasis IoT,” J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 5, no. 3, pp. 496–503, 2021, doi: 10.29207/resti.v5i3.3037.
R. A. Murdiyantoro, A. Izzinnahadi, and E. U. Armin, “Sistem Pemantauan Kondisi Air Hidroponik Berbasis Internet of Things Menggunakan NodeMCU ESP8266,” J. Telecommun. Electron. Control Eng., vol. 3, no. 2, pp. 54–61, 2021, doi: 10.20895/jtece.v3i2.258.
M. Artiyasa, I. Himawan Kusumah, A. Suryana, Edwinanto, A. D. W. Muhammad Sidik, and A. Pradiftha Junfithrana, “Comparative Study of Internet of Things (IoT) Platform for Smart Home Lighting Control Using NodeMCU with Thingspeak and Blynk Web Applications,” Fidel. J. Tek. Elektro, vol. 2, no. 1, pp. 1–6, 2020, doi: 10.52005/fidelity.v2i1.103.
A. Wihandanto, A. J. Taufiq, and W. Dwiono, “Rancang Bangun Prototipe Sistem Smart Parking Berbasis Iot Menggunakan Node Mcu Esp8266,” J. Tek. Elektro dan Komput. TRIAC, vol. 8, no. 1, pp. 18–22, 2021, doi: 10.21107/triac.v8i1.10413.
A. M. Ibrahim and D. Setiyadi, “Prototype Pengendalian Lampu Dan Ac Jarak Jauh Dengan Jaringan Internet Menggunakan Aplikasi Telegram Berbasis Nodemcu Esp8266,” Infotech J. Technol. Inf., vol. 7, no. 1, pp. 27–34, 2021, doi: 10.37365/jti.v7i1.103.
M. Artiyasa, A. Nita Rostini, Edwinanto, and Anggy Pradifta Junfithrana, “Aplikasi Smart Home Node Mcu Iot Untuk Blynk,” J. Rekayasa Teknol. Nusa Putra, vol. 7, no. 1, pp. 1–7, 2021, doi: 10.52005/rekayasa.v7i1.59.
I. Gunawan, T. Akbar, and M. G. Ilham, “Prototipe Penerapan Internet Of Things (Iot) Pada Monitoring Level Air Tandon,” J. Inform. dan Teknol., vol. 3, no. 1, pp. 1–7, 2020.
Mariza Wijayanti, “Prototype Smart Home Dengan Nodemcu Esp8266 Berbasis Iot,” J. Ilm. Tek., vol. 1, no. 2, pp. 101–107, 2022, doi: 10.56127/juit.v1i2.169.
D. Ramdani, F. M. Wibowo, and Y. A. Setyoko, “Rancang Bangun Sistem Otomatisasi Suhu Dan Monitoring pH Air Aquascape Berbasis IoT (Internet Of Thing) Menggunakan Nodemcu Esp8266 Pada Aplikasi Telegram,” J. Informatics, Inf. Syst. Softw. Eng. Appl., vol. 3, no. 1, pp. 59–68, 2020, doi: 10.20895/INISTA.V2I2.
A. P. Manullang, Y. Saragih, and R. Hidayat, “Implementasi Nodemcu Esp8266 Dalam Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis Iot,” JIRE (Jurnal Inform. Rekayasa Elektron. , vol. 4, no. 2, pp. 163–170, 2021, [Online]. Available: http://e-journal.stmiklombok.ac.id/index.php/jireISSN.2620-6900.
K. P. Aji, U. Darusalam, and N. D. Nathasia, “Perancangan Sistem Presensi Untuk Pegawai Dengan RFID Berbasis IoT Menggunakan NodeMCU ESP8266,” JOINTECS (Journal Inf. Technol. Comput. Sci., vol. 5, no. 1, p. 25, 2020, doi: 10.31328/jointecs.v5i1.1222.
I. Efimov and G. Salama, “The future of optical mapping is bright: RE: Review on: ‘optical imaging of voltage and calcium in cardiac cells and tissues’ by Herron, Lee, and Jalife,” Circ. Res., vol. 110, no. 10, pp. 516–522, 2012, doi: 10.1161/CIRCRESAHA.112.270033.
B. Satria, “IoT Monitoring Suhu dan Kelembaban Udara dengan Node MCU ESP8266,” sudo J. Tek. Inform., vol. 1, no. 3, pp. 136–144, 2022, doi: 10.56211/sudo.v1i3.95.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Smart Farm Hydroponics berbasis IOT dengan NodeMCU ESP8266
Pages: 98-103
Copyright (c) 2023 Rahmad Doni, Iwan Fitrianto Rahmad
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
