Transformasi Limbah Vulkanik Gunung Lewotobi menjadi Filler Alternatif pada Beton Aspal Lapis Permukaan: Studi Eksperimen dengan Metode Marshall
Abstract
Volcanic activity at Mount Lewotobi produces large quantities of volcanic ash which, to date, has not been utilised to its full potential and tends to end up as environmental waste. On the other hand, the demand for fillers in asphalt concrete surface course (AC-WC) mixtures continues to rise in line with the development of road infrastructure, whilst the availability of conventional fillers is limited and dependent on specific materials. These circumstances highlight the need to develop sustainable alternative fillers based on local materials. This study aims to analyse the potential of volcanic ash from Mount Lewotobi as an alternative filler in surface-treated asphalt concrete (AC-WC) mixtures. The research focused on evaluating the physical characteristics of volcanic ash and the effect of its use on the Marshall parameters of the AC-WC mixture. The results of the study indicate that volcanic ash from Mount Lewotobi has a fineness that meets the requirements for use as a filler. The use of volcanic ash as an alternative filler produced stability, flow, VIM, VMA and VFB values that fell within the specification limits. At certain filler contents, volcanic ash was able to improve the stability and density of the mixture without significantly reducing its flexibility. The findings of this study take the form of technical recommendations for the use of volcanic ash from Mount Lewotobi as an alternative filler in AC-WC mixtures, which are expected to support the utilisation of local materials, resource efficiency and the implementation of sustainable road pavement construction, particularly in the East Nusa Tenggara region.
Downloads
References
Banggur, W. F. S., Nareswari, R. B., Saina, N., Astyka Pamumpuni, Mirzam Abdurrachman, Estu Kriswati, Liswanto, Mukdas Sofian, Yadi Yuliandi, Kristianto, Sofyan Primulyana, & Idham Kurniawan. (2024). Erupsi Semeru 1 Desember 2020: Kronologi Kejadian Aliran Piroklastik, Kondisi Pre-Eruptif, dan Laju Ekstrusi Material Volkanik. Jurnal Geologi Dan Sumberdaya Mineral, 25(3), 181–191. https://doi.org/10.33332/jgsm.geologi.v25i3.796
Berliana, A., Oktavia, S. D., & Sulistyo, J. A. (2026). Pengaruh Penambahan Limbah Serbuk Kayu Bangkirai dan Pasir Karjon terhadap Karakteristik Marshall Campuran Asphalt Concrete Wearing Course (AC-WC). RIGGS: Journal of Artificial Intelligence and Digital Business, 5(1), 3208–3217. https://doi.org/10.31004/riggs.v5i1.6655
Cruz, N., Avellan, A., Ruivo, L., Silva, F. C., Rӧmkens, P. F. A. M., Tarelho, L. A. C., & Rodrigues, S. M. (2023). Biomass ash-based soil improvers: Impact of formulation and stabilization conditions on materials’ properties. Journal of Cleaner Production, 391, 136049. https://doi.org/10.1016/j.jclepro.2023.136049
Fayissa, B., Kebede, A., & Fufa, F. (2022). Potential Use of Volcanic Ash as Filler Material in Hot Mix Asphalt. Advances in Civil Engineering, 2022(1). https://doi.org/10.1155/2022/8486774
Hu, S., Li, J., Yang, X., Chen, Y., Li, F., Wang, J., Wu, C., Weng, L., & Liu, K. (2020). Improvement on slurry ability and combustion dynamics of low quality coals with ultra-high ash content. Chemical Engineering Research and Design, 156, 391–401. https://doi.org/10.1016/j.cherd.2020.02.011
Jamilah, W., Sabrina, B., Destania, H. R., & Aprianto, R. (2025). Studi Karakteristik VIM, VMA, dan VFA Campuran Aspal Beton. Teknika Sains: Jurnal Ilmu Teknik, 10(2), 251–257. https://doi.org/10.24967/teksis.v10i2.4638
Kumar, B., & Kumar, N. (2024). Enhancing asphalt mixture performance through waste plastic modification: a comprehensive analysis of optimal compositions and volumetric properties. Journal of Structural Integrity and Maintenance, 9(2). https://doi.org/10.1080/24705314.2024.2376804
M Zain, T., Agung, P., & Kiki, L. (2023). Analisis Karakteristik Campuran Aspal Ditinjau Dari Aspek Properties Marshall. Jurnal Teknik Sipil Pertahanan, 10(2), 138–152. https://doi.org/10.63824/jptsp.v10i2.102
Mojapelo, K. S., Kupolati, W. K., Burger, E. A., Ndambuki, J. M., Snyman, J., Achi, C. G., & Quadri, A. I. (2025). Performance Evaluation and Future Prospects of the Wastewater Sludge Ash as a Filler Material in Asphalt Mixture. Materials Circular Economy, 7(1), 16. https://doi.org/10.1007/s42824-025-00177-6
Munir, I., Sazuatmo, S., & Hariza, E. R. (2025). Analisis Pemanfaatan Limbah Serbuk Besi Sebagai Bahan Pengganti Filler Terhadap Campuran Aspal. RIGGS: Journal of Artificial Intelligence and Digital Business, 4(4), 1286–1292. https://doi.org/10.31004/riggs.v4i4.3424
Ogunbode, E. B., Nyakuma, B. B., Jimoh, R. A., Lawal, T. A., & Nmadu, H. G. (2023). Mechanical and microstructure properties of cassava peel ash–based kenaf bio-fibrous concrete composites. Biomass Conversion and Biorefinery, 13(8), 6515–6525. https://doi.org/10.1007/s13399-021-01588-6
Omranian, S. R., Hamzah, M. O., Pipintakos, G., Van den bergh, W., Vuye, C., & Hasan, M. R. M. (2020). Effects of Short-Term Aging on the Compactibility and Volumetric Properties of Asphalt Mixtures Using the Response Surface Method. Sustainability, 12(15), 6181. https://doi.org/10.3390/su12156181
Pradita, S. N., Siti, F., & Rachmat, M. (2025). Analisis Asphalt Concrete Wearing Course (AC-WC) Modifikasi Dengan Penambahan Wood Ash Dan Styrofoam Expanded Polystyrene (EPS) Untuk Perkerasan Jalan. Journal of Engineering and Applied Technology, 1(2), 410–422. https://doi.org/10.65310/a7qp5y50
Puri, L., Hu, Y., & Naterer, G. (2024). Critical review of the role of ash content and composition in biomass pyrolysis. Frontiers in Fuels, 2. https://doi.org/10.3389/ffuel.2024.1378361
Rafi, R., Azzura Maldina, R., Habibi Al-Ghifari, M., Zakir, A., Mulya, A., Studi Meteorologi, P., Tinggi Meteorologi Klimatologi dan Geofisika, S., & Meteorologi No, J. (2025). Gunung Lewotobi Laki-Laki Menggunakan Metode Rgb Himawari-9 Dan Model Hysplit (Studi Kasus: 15 Oktober 2025). Jurnal Ilmiah Teknosains, 1(1). https://ready.arl.noaa.gov/HYSPLIT.php.
Rahayu, S., & Lizar. (2025). Pengaruh Genangan Air Terhadap Kerusakan Jalan Aspal (AC-WC). KERN : Jurnal Ilmiah Teknik Sipil, 11(2), 51–63. https://doi.org/10.33005/kern.v11i2.61
Rocha, M. L., Aragão, F. T. S., Nascimento, L. A. H. do, & Underwood, B. S. (2023). Balanced Mixture Design Framework for Asphalt Mixtures Based on Index- and Performance-Volumetrics Relationships. Transportation Research Record: Journal of the Transportation Research Board, 2677(10), 233–245. https://doi.org/10.1177/03611981231161063
Sitohang, O., & Sinuhaji, S. (2018). Penggunaan Abu Vulkanik Sinabung Terhadap Stabilitas Campuran Aspal Beton (Hot Mix). Jurnal Rekayasa Konstruksi Mekanika Sipil (JRKMS), 78–94. https://doi.org/10.54367/jrkms.v1i2.283
Sumiati, S., Situmeang, S. Y., & Aszharri, A. (2026). Kinerja Campuran Aspal Beton Porus Terhadap Parameter Marshall Menggunakan Aspal Karet Alam Padat. Teras Jurnal : Jurnal Teknik Sipil, 16(1), 182–194. https://doi.org/10.29103/tj.v16i1.1337
Xi, L., Luo, R., & Liu, H. (2021). Evaluating the influence of humidity on asphalt mixture performance by the flow number test. Construction and Building Materials, 284, 122754. https://doi.org/10.1016/j.conbuildmat.2021.122754
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Transformasi Limbah Vulkanik Gunung Lewotobi menjadi Filler Alternatif pada Beton Aspal Lapis Permukaan: Studi Eksperimen dengan Metode Marshall
Pages: 749-759
Copyright (c) 2026 Dewi Anastasia Ipah Wuwur, Vinsensius Budiman Pantas

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).













