Prototype Sistem Otomasi Jemuran Cerdas (Smart Clothesline) Berbasis NodeMCU ESP8266 dan Aplikasi Blynk
- Rully Panji Mustiko Pamungkas Universitas Bina Sarana Informatika, Jakarta, Indonesia
- Anisa Nur Pristi Universitas Bina Sarana Informatika, Jakarta, Indonesia
-
Corie Mei Hellyana
*
Universitas Bina Sarana Informatika, Jakarta,
Indonesia
(*) Corresponding Author
Abstract
Indonesia experiences two seasons, the rainy season and the dry season, which often result in unpredictable weather and hinder household activities such as drying clothes. This study aims to design and construct an Internet of Things (IoT)-based automatic clothesline system capable of detecting weather conditions using an LDR (Light Dependent Resistor) sensor and a rain sensor, controlled via NodeMCU ESP8266. The system enables the clothesline to close automatically during rain or when sunlight intensity is insufficient. The research employs the prototype method, which involves the stages of design, development, testing, and evaluation. This study contributes to the development of logic that integrates rapid rain protection and light-based drying efficiency into a single system monitorable in real-time. Data were collected through observation, interviews, and literature review. Test results indicate that the device operates automatically based on weather conditions and can be remotely controlled using the Blynk application. Although the device has limitations, such as not closing at night in the absence of rain and limited manual control within the application, the system has proven effective in reducing user reliance on manual monitoring and offers a practical solution for modern IoT-based households.
Downloads
References
Amin, I. F., & Laksmiati, D. (2024). Perancangan Jemuran Otomatis Berbasis IoT Menggunakan ESP32 Dan API. Jurnal Ilmiah GIGA, 27(November 2023), 23–32.
Arfianto, D., Prabowo, Y., & Everhard, Y. (2021). Prototipe Jemuran Otomatis dengan Sensor Hujan , LDR Berbasiskan Arduino Uno R3 dan Sistem Monitoring Menggunakan Aplikasi Blynk. September, 269–277.
Artiyasa, M., Nita Rostini, A., Edwinanto, & Anggy Pradifta Junfithrana. (2021). Aplikasi Smart Home Node Mcu Iot Untuk Blynk. Jurnal Rekayasa Teknologi Nusa Putra, 7(1), 1–7. https://doi.org/10.52005/rekayasa.v7i1.59
Asmidin, A. M., Atina, L., & Anjani, W. A. (2023). Rancang Bangun Jemuran Pakaian Otomatis Berbasis Internet of Things Design Automatic clothesline Based on the Internet of Things. 12(1), 50–59.
Badan Meteorologi Klimatologi dan Geofisika. (2023). Variabilitas Iklim Di Indonesia. https://iklim.bmkg.go.id/bmkgadmin/storage/brosur/LEAFLETINDO.pdf
Bukhari, Ismy, A. S., Turmizi, & Razi, M. (2020). Rancang Bangun Alat Pengering Pakaian Secara Otomatis Berbasis Internet of Thing. Proceeding Seminar Nasional Politeknik Negeri Lhokseumawe, 4(1), 128–133.
Dania, C., Porman, P., & Cahyantari, E. (2019). Sistem Suplai Energi Listrik Untuk Penggerak Jemuran Otomatis Dengan Memanfaatkan Solar Cell. E-Proceeding of Engineering, 6(2), 3142–3149.
Danu, M., Mawasandi, F., Aziz, Z. N., & Rosyadi, M. F. G. (2025). Transformasi Manajemen Rantai Pasokan Berbasis Internet of Things ( IoT ): Tinjauan Literatur. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 4(1), 32–44.
Elga, A. P. (2022). Pengertian dan Prinsip Kerja Motor Servo. https://www.arduinoindonesia.id/2022/10/pengertian-dan-prinsip-kerja-motor-servo.html
Enggar Okta, D. S. (2018). Rancang Bangun Sistem Monitoring Pengering Pakaian. JATI (Jurnal Mahasiswa Teknik Informatika), 2(2), 65–71.
Hafan, M. R., Majid, N. A., Arwiana, S. D., & Erina, T. N. (2024). Rancang Bangun Jemuran Otomatis Menggunakan Sensor Raindrop Berbasis Arduino Uno Dengan Kearifan Lokal Rumah Joglo. 300–309.
Hendrian, Y., Yudatama, Y. P., & Pratama, V. S. (2020). Jemuran Otomatis Menggunakan Sensor LDR , Sensor Hujan Dan Sensor Kelembaban Berbasis Arduino Uno. VI(1), 21–30. https://doi.org/10.31294/jtk.v4i2
Kusuma, H. A., Maritim, U., Ali, R., Suhendra, T., Maritim, U., Ali, R., Yunianto, A. H., Maritim, U., Ali, R., Egistian, F., Maritim, U., & Ali, R. (2022). Pemrograman Dasar Internet of Things Menggunakan ESP8266 (Issue August).
MIF’ad, I., Izham, H. H., Andi, S. P., Bambang, Purwahyudi, & Richa, W. (2024). Rancang bangun sistem jemuran pakaian otomatis berbasis arduino. 2(2), 83–92.
Munthe, J. A. (2025). Implementasi Sistem Otomatisasi Jemuran Menggunakan Sensor LDR dan Sensor Hujan Berbasis ESP8266. 8266.
Nasution, N., Marpaung, D. M., & Nasution, M. I. (2023). Sistem Otomatisasi Jemuran Pakaian dengan Sensor Hujan dan Sensor LDR Berbasis Arduino Uno (pp. 125–131).
Sintia, F., Triadyaksa, P., Sains, F., & Diponegoro, U. (2020). Sistem Otomatisasi Dan Kendali Jarak Jauh Lampu Smart House Berbasis NODEMCU ESP8266. 23(4).
Syam, A., & Asmidin, A. M. (2023). Alat Jemuran Otomatis Menggunakan Rain Sensor Dan Internet Of Things ( IoT ). 6(1), 19–23.
Tjahjono, B., Siregar, S. V., Basyarewan, H., Studi, P., Manajemen, M., Esa, U., Studi, P., Ilmu, M., Komputer, F. I., & Esa, U. (2025). Artificial Intelligence Dan Aplikasi Iot Pada Smart Homes : Wawasan Strategis Untuk.
Wahyudi, E., & Wibowo, A. (2025). Rancang Bangun Implementasi Alat Jemuran OtomatiS. 1–11.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Prototype Sistem Otomasi Jemuran Cerdas (Smart Clothesline) Berbasis NodeMCU ESP8266 dan Aplikasi Blynk
Pages: 962-968
Copyright (c) 2025 Rully Panji Mustiko Pamungkas, Anisa Nur Pristi, Corie Mei Hellyana
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
