Penggunaan Sistem Microcontroler Untuk Penyiraman Tanaman Secara Terjadwal Menggunakan Arduino
Abstract
So far, watering plants is done manually. However, sometimes humans are constrained by limited free time. By using this tool, it is expected that watering the plants can be done at the right time. This research was conducted by making a device that can water plants on a scheduled basis using the Real Time Clock Module which is controlled by Arduino Uno. Plant watering system that is made can water plants automatically according to the schedule that has been set. The results of this study aim to facilitate the process of watering plants in the yard
Downloads
References
J. Tarigan and M. Bukit, “Rancang Bangun Sistem Penyiraman Tanaman Secara Mandiri Berbasis Mikrokontroller Atmega 8535,” J. Fis. Fis. Sains dan Apl., vol. 3, no. 3, pp. 137–141, 2018.
M. A. Wijaya, R. Hanifah, and M. C. T. Manullang, “Purwarupa penyiraman otomatis dengan arsitektur mqtt dan logika fuzzy sugeno untuk meningkatkan keefektifan manajemen penyiraman tanaman (studi kasus : itera),” J. Teknol. Inf. Univ. Lambung Mangkurat, vol. 05, no. 2, pp. 49–56, 2020.
T. Afandi, “Otomatisasi Alat Penyiram Berbasis Moisture Sensor,” 2016.
C. Chotimah and K. P. Kartika, “Sistem Penyiraman Dan Pengusir Hama Otomatis Pada Daun Mint Berbasis Mikrokontroler Arduino Uno,” Antivirus J. Ilm. Tek. Inform., vol. 13, no. 1, pp. 36–47, 2019.
R. S. D. Garsela, “Untuk Sistem Penyiraman Tanaman Otomatis,” p. 95, 2019.
A. Putra, A. Indra, and H. Afriyastuti, “PROTOTIPE SISTEM IRIGASI OTOMATIS BERBASIS PANEL SURYA MENGGUNAKAN METODE PID DENGAN SISTEM MONITORING IoT,” Repository.Unib.Ac.Id, 2018.
P. A. Wulandari, P. Rahima, and S. Hadi, “Rancang Bangun Sistem Penyiraman Otomatis Berbasis Internet of Things Pada Tanaman Hias Sirih Gading,” J. Bumigora Inf. Technol., vol. 2, no. 2, pp. 77–85, 2020.
P. Setiawan, E. Y. Anggraen, P. Studi, S. Informasi, and S. Kelembapan, “Prorotype Sistem Penyiraman Tanaman Otomatis Terjadwal dan Berbasis Sensor Kelembapan Tanah,” Ibi Darmajaya, pp. 277–283, 2019.
V. C. Alverina, J. Siwalankerto, S. Jln, S. Surabaya, and J. Siwalankerto, “Aplikasi Monitoring Kesuburan Tanaman Hias Mawar menggunakan Arduino.”
K. Y.-D. Yl-, T. Elektro, U. Sam, R. Manado, and J. K. B. Manado, “Rancang Bangun Penyiram Tanaman Berbasis Arduino Uno Menggunakan Sensor,” vol. 7, no. 3, 2018.
E. A. Suprayitno MT, R. D. M.Kom, and M. A. ST, “Otomasi Sistem Hidroponik DFT (Deep Flow Technique) Berbasis Arduino Android dengan Memanfaatkan Panel Surya sebagai Energi Alternatif,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 3, no. 2, pp. 30–37, 2019.
J. T. Informasi and K. S. Subang, “Jurnal Teknologi Informasi dan Komunikasi STMIK Subang, April 2014 ISSN: 2252-4517,” no. April, pp. 1–15, 2014.
D. A. N. Iot and M. R. Fahroni, “mencapai derajat Sarjana S1 Disusun oleh : Jurusan Teknik Elektro Fakultas Teknologi Industri Universitas Islam Indonesia Yogyakarta,” 2020.
M. H. Habibullah, “Desain dan Implementasi Sensor untuk Penyemprotan Disenfektan sebagai Pengendali Virus Corona,” Skripsi, 2020.
Harifuzzumar, F. Arkan, and Ghiri Basuki Putra, “Perancangan Dan Impelementasi Alat Pemberian Pakan Ikan Lele Otomatis Pada Fase Pendederan Berbasis Arduino Dan Aplikasi Blynk,” Pros. Semin. Nas. Penelit. Pengabdi. pada Masy., pp. 67–71, 2018.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penggunaan Sistem Microcontroler Untuk Penyiraman Tanaman Secara Terjadwal Menggunakan Arduino
Pages: 44-48
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).













