Rancang Bangun Alat Pengering Kerupuk Kulit Dengan Pemanas Heater Menggunakan Fuzzy Logic Berbasis Mikrokontroler
-
Muh. Riski Ramadhan
*
Universitas Mataram, Mataram,
Indonesia
- Budi Darmawan Universitas Mataram, Mataram, Indonesia
- I Made Budi Suksmadana Universitas Mataram, Mataram, Indonesia (*) Corresponding Author
Abstract
Livestock leather is a food ingredient that can be processed using various types of preparations, one of which is into leather crackers. The processing of leather crackers is done by drying which reduces the water content to the required limit. The processing process requires a long process with the help of sunlight for drying which takes 1-2 days. This research aims to design and develop a skin cracker drying system by utilizing a control-based method fuzzy logic to speed up the drying process of skin crackers. This system consists of a temperature sensor, a weight sensor. Testing of this system has been carried out using several pieces of skin as samples. The research results show that the control method is based on fuzzy logic can stabilize the temperature to the desired for the drying process. Application of heating control methods based on fuzzy logic The skin cracker drying machine is designed at a set point temperature of 50°C so that it can help reduce the weight of the crackers linearly so that the skin crackers are wet weighing 3kg to 973 grams which takes 7 hours.
Downloads
References
AMIK BSI Purwokerto, I., & - AMIK BSI Purwokerto, C. (2016). Perancangan Dan Pembuatan Alat Pengering Kerupuk Otomatis Menggunakan Mikrokontroler atmega16. Evolusi, 4(2), 2–6. https://doi.org/10.2311/evo.v4i2.236
Adamsyah, M. S., & Mulyadi, M. (2019). Perancangan Alat Pengering Kerupuk dengan Menggunakan Pemanas Heater. R.E.M (Rekayasa Energi Manufaktur) Jurnal, 4(1). https://doi.org/10.21070/r.e.m.v4i1.2187
Adiyanto, O., Suratmo, B., & Susanti, D. Y. (2018) Perancangan Pengering Kerupuk Rambak dengan Menggunakan Kombinasi Energi Surya Dan Energi Biomassa. JISI Jurnal Integrasi Sistem Industri, 4(1), 1–10.
Akhir, L., & Madya, A. (2022). RANCANG BANGUN MESIN PENGERING KERUPUK TIPE RAK DENGAN KAPASITAS 2 KG.
Alfitri, N., & Fajar Sidiq, R. (2019). Alat Pengeringan Cengkeh Otomatis Menggunakan Logika Fuzzy. Elektron Jurnal Ilmiah, 11.
Amertaningtyas, D. (2017). Pengolahan Kerupuk Rambak Kulit di Indonesia. Fakultas Peternakan UB. Jurnal Ilmu Peternakan 21 (3): 18-29.
Andrianto,. Heri,.& Aan Darmawan. (2016). Arduino Belajar Cepat dan Pemrograman. Bandung : Informatika Bandung.
Fajri, R. P., Putra, J. P., Sumiati, R., Mesin, T., & Padang, N. (2017). Alat Pengering Kerupuk Palembang Dengan Menggunakan Gas LPG. JURNAL Teknik Mesin, 10(2), 31–37. http://ejournal2.pnp.ac.id/index.php/jtm
Hazhar, K., & Sardi, J. (2020). Alat Pengering Gabah Berbasis Microcontroller Dengan Sensor DHT22. JTEIN: Jurnal Teknik Elektro Indonesia, 1(2), 255-260. https://doi.org/10.24036/jtein.v1i2.93
J. Sirait.(2016). Pembuatan Alat Pengering Kerupuk Rambak dengan Kapasitas 30 Kg. J Ris Teknol Ind, vol. 7, pp. 118–118.
Karo,Trudly. (2016). Spesifikasi Elemen Pemanas Persegi Panjang. https://www.tokopedia.com/cvttg/elemen-pemanas-tipe-kabelhigh-qualityheater-body-magic-com
Perdana, A., Islami, S., Pulungan, A., & Hamdani, H. (2023). Rancang Bangun Alat Kendali Penjemur Ikan Asin Bagi Para Nelayan Pesisir Selatan Tarusan Berbasis Mikrokontroller Arduino Uno. JTEIN: Jurnal Teknik Elektro Indonesia, 4(1), 256-264. https://doi.org/10.24036/jtein.v4i1.401
Putri, M., & Taali, T. (2022). Rancang Bangun Alat Pengering Biji Kakao dengan Pengendalian Kelembaban dan Suhu Berbasis Arduino Mega 2560. JTEIN: Jurnal Teknik Elektro Indonesia, 3(1), 147-157. https://doi.org/10.24036/jtein.v3i1.224
Rahmi, R., & Yelfianhar, I. (2023). Perancangan Sistem Lemari Pengering Dan Pensterilisasi Pakaian Bayi Otomatis Berbasis IoT. JTEIN: Jurnal Teknik Elektro Indonesia, 4(2), 683. https://doi.org/10.24036/jtein.v4i2.462
Rifdah, Kalsum, U. (2018). Efektivitas Alat Pengering Sebagai Pengganti Sinar Matahari Pada Pengeringan Kemplang Ikan. 3(1), 22–28.
Ristiawan, M., & Ariyanto, E. (2021). Otomatisasi Pengatur Suhu dan Waktu pada Penyangrai Kopi ( Roaster Coffee ) Berbasis Atmega 16 pada Tampilan LCD ( Liquid Crystal Display ). Gema Teknologi, 19(1), 6. https://doi.org/10.14710/gt.v19i1.21949
Rizal, M., Handayani, P., Chandra, I., & Riadi, J. (2022). Prosiding The 13th Industrial Research Workshop and National Seminar Bandung.
Sayekti, M. (2018). Otomasi Alat Pengering Kerupuk Berbasis Mikrokontroler AT-Mega 16. 2(1), 4–8.
Suhariningsih, R. R., Politeknik, E., Negeri, S., & Surabaya, I. (2018). Penerapan Kontrol Logika Fuzzy pada Sistem Pengering Irisan Kripik Singkong. In Seminar Nasional Instrumentasi, Kontrol dan Otomasi (SNIKO).
Syani, I., & Hastuti, H. (2021). Rancang Bangun Alat Pengering Ikan Teri Mandiri Otomatis Berbasis Ardiuno Uno. JTEIN: Jurnal Teknik Elektro Indonesia, 2(2), 136-141. https://doi.org/10.24036/jtein.v2i2.146
Syarifudin, M. (2019). Oven Pengering Kerupuk Berbasis Mikrokontroler Atmega 8535 Menggunakan Pemanas Pada Industri Rumah Tangga. Jurusan Teknik Elektro, Institut Sains & Teknologi AKPRIND Yogyakarta.
Wiriano, H. (2017). Mekanisme Teknologi Pembuatan Kerupuk. Balai Pengembangan Makanan Phytokimia, Balai Penelitian dan Pengembangan Industri, Departemen Perindustrian. Jakarta.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Alat Pengering Kerupuk Kulit Dengan Pemanas Heater Menggunakan Fuzzy Logic Berbasis Mikrokontroler
Pages: 750-757
Copyright (c) 2024 Muh. Riski Ramadhan, Budi Darmawan, I Made Budi Suksmadana
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
