AR-FootIN 4.0 : Aplikasi Pengenalan Teknologi Industri 4.0 Pada Bidang Alas Kaki Berbasis Mobile Augmented Reality
- Alifia Revan Prananda Universitas Tidar, Magelang, Indonesia
- Marwanto Marwanto Universitas Negeri Yogyakarta, Yogyakarta, Indonesia
-
Eka Legya Frannita
*
Politeknik ATK Yogyakarta, Yogyakarta,
Indonesia
- Anwar Hidayat Politeknik ATK Yogyakarta, Yogyakarta, Indonesia (*) Corresponding Author
Abstract
Rapid development of technology gave a positive impact on the footwear industry. The emergence of various types of technology as part of the industrial revolution 4.0 has greatly helped various types of work in industry. However, technology also need to be supported by good quality resource. Knowledge regarding how to use and maintain these technologies is needed so that the benefits of these technologies can be utilized. An alternative way is by developing good quality of human resource to being proficient in using technology. Furthermore, cultivating technological literacy is also one of the essential factors. Regarding to this situation, we proposed research that aims to develop the AR-FootIN 4.0 application as a learning media for introducing industry 4.0 in the footwear sector. This learning media is developed by employing mobile augmented reality. The proposed learning media is developed by using the SDLC method. The resulted learning media is then evaluated by conducting two types of evaluation, which are expert evaluation and user evaluation. The results of expert evaluation and user evaluation obtain a percentage of 93.33% and 86% respectively, which means that the feasibility of the application to support the technological literacy process in the footwear industry is very good.
Downloads
References
Aprilinda, Y., Yuli Endra, R., Nur Afandi, F., Ariani, F., Cucus, A., Setya Lusi, D., & Bandar Lampung, U. (2022). Implementasi Augmented Reality untuk Media Pembelajaran Biologi di Sekolah Menengah Pertama. Jurnal Sistem Informasi Dan Telematika, 11(2), 124–133.
Bonuccelli, G. (2017). Industry 4.0 and Application Virtualization. Parallels. https://www.parallels.com/blogs/ras/industry-4-0/
Chang, R. h., & Chung, L. Y. (2014). A Study on Augmented Reality Application in Situational Simulation Learning. 2014 7th International Conference on Ubi-Media Computing and Workshops, 115–120. https://doi.org/10.1109/U-MEDIA.2014.14
Intalar, N., Chumnumporn, K., Jeenanunta, C., & Tunpan, A. (2021). Towards Industry 4.0: Digital transformation of traditional safety shoes manufacturer in Thailand with a development of production tracking system. Engineering Management in Production and Services, 13(4), 79–94. https://doi.org/10.2478/emj-2021-0033
Jandova, S., & Mendricky, R. (2021). Benefits of 3D Printed and Customized Anatomical Footwear Insoles for Plantar Pressure Distribution. 3D Printing and Additive Manufacturing. https://doi.org/10.1089/3dp.2021.0002
Kurniawan, M. H., & Julianto. (2022). Pengembangan Media Pembelajaran Berbasis AR “Augmented Reality” pada Materi Sistem Tata Surya Kelas 6 SD. Jurnal Penelitian Pendidikan Guru Sekolah Dasar, 10(06), 1401–1414. https://ejournal.unesa.ac.id/index.php/jurnal-penelitian-pgsd/article/view/47331
Kurniawan, M. P., Purwanto, A., & Mansur, M. F. (2019). Augmented Reality of Android-Based Learning Media of Sun and Earth Structure. 2019 4th International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE), 85–90. https://doi.org/10.1109/ICITISEE48480.2019.9003985
Marsono, & Kristyanto, R. (2021). The Development of Learning Media Based on Augmented Reality for Industrial Metrology and Quality Control Courses. 2021 7th International Conference on Electrical, Electronics and Information Engineering (ICEEIE), 1–6. https://doi.org/10.1109/ICEEIE52663.2021.9616852
Mikušová, N., Neradilová, H., Hlatká, M., Fedorko, G., Molnár, V., & Kráľ, J. (2024). Use of Augmented Reality in Railway Transport. Transportation Research Procedia, 77, 253–259. https://doi.org/https://doi.org/10.1016/j.trpro.2024.01.034
Mustaqim, I., & Kurniawan, N. (2017). PENGEMBANGAN MEDIA PEMBELAJARAN BERBASIS AUGMENTED REALITY. Jurnal Edukasi Elektro, 1(1), 82–93. https://doi.org/10.37905/jji.v4i2.16448
Nainggolan, E. R., Asymar, H. H., Nalendra, A. R. A., Anton, Sulaeman, F., Sidik, Radiyah, U., & Susafa’ati. (2018). The Implementation of Augmented Reality as Learning Media in Introducing Animals for Early Childhood Education. 2018 6th International Conference on Cyber and IT Service Management (CITSM), 1–6. https://doi.org/10.1109/CITSM.2018.8674350
Oztemel, E., & Gursev, S. (2020). Literature review of Industry 4.0 and related technologies. Journal of Intelligent Manufacturing, 31(1), 127–182. https://doi.org/10.1007/s10845-018-1433-8
Popkova, E. G., & Ragulina, Y. V. (2019). Industry 4.0: Industrial Revolution of the 21st Century. In B. Aleksei V. (Ed.), Studies in Systems, Decision and Control (Vol. 169). Springer International Publishing. https://doi.org/10.1007/978-3-030-39319-9_9
Purwanto, A., Kurniawan, M. P., & Rahman, A. Z. (2019). Animal metamorphosis learning media using android Based augmented reality technology. 2019 4th International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE), 79–84. https://doi.org/10.1109/ICITISEE48480.2019.9003765
Qamari, C. N., & Ridwan, M. R. (2017). Implementation of Android-based augmented reality as learning and teaching media of dicotyledonous plants learning materials in biology subject. 2017 3rd International Conference on Science in Information Technology (ICSITech), 441–446. https://doi.org/10.1109/ICSITech.2017.8257153
Sahu, M., Gupta, R., Ambasta, R. K., & Kumar, P. (2024). IoT-driven augmented reality and virtual reality systems in neurological sciences. Internet of Things, 25, 101098. https://doi.org/https://doi.org/10.1016/j.iot.2024.101098
Segovia, D., Mendoza, M., Mendoza, E., & González, E. (2015). Augmented Reality as a Tool for Production and Quality Monitoring. Procedia Computer Science, 75, 291–300. https://doi.org/https://doi.org/10.1016/j.procs.2015.12.250
Syahputra, A., Sanjaya, A., Agustin, Y. H., Prasetya, W. S., Nurhayati, & Siregar, E. T. (2021). Learning Media Design Based on Augmented Reality Introduction to Rare Plants. 2021 3rd International Conference on Cybernetics and Intelligent System (ICORIS), 1–4. https://doi.org/10.1109/ICORIS52787.2021.9649513
Tahar, A., Setiadi, P. B., Rahayu, S., Stie, M. M., & Surabaya, M. (2022). Strategi Pengembangan Sumber Daya Manusia dalam Menghadapi Era Revolusi Industri 4.0 Menuju Era Society 5.0. Jurnal Pendidikan Tambusai, 6(2), 12380–12381.
Yuhana, U. L., Hariadi, R. R., Mukramin, M., Fabroyir, H., & Arifiani, S. (2020). AUGGO: Augmented Reality and Marker-based Application for Learning Geometry in Elementary Schools. 2020 International Conference on Computer Engineering, Network, and Intelligent Multimedia (CENIM), 116–120. https://doi.org/10.1109/CENIM51130.2020.9298003
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel AR-FootIN 4.0 : Aplikasi Pengenalan Teknologi Industri 4.0 Pada Bidang Alas Kaki Berbasis Mobile Augmented Reality
Pages: 660-668
Copyright (c) 2024 Alifia Revan Prananda, Marwanto Marwanto, Eka Legya Frannita, Anwar Hidayat
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
