Rancang Bangun Inverter Mengubah Arus Listrik DC ke AC Berbasis Arduino Uno
-
Risky Binsar Pandapotan Simanjuntak
*
STIKOM Tunas Bangsa, Pematangsiantar,
Indonesia
- M Safii AMIK Tunas Bangsa, Pematangsiantar, Indonesia
- Fitri Anggraini STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Sumarno Sumarno STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Indra Gunawan STIKOM Tunas Bangsa, Pematangsiantar, Indonesia (*) Corresponding Author
Abstract
At this time electrical energy is needed in terms of helping humans in carrying out their activities both in doing their daily work. In this case, it is impossible for there to be problems in periodic blackouts to save electricity resources carried out by PLN and to disrupt all human activities starting from the tools that require electrical energy. For this reason, it is necessary to anticipate by making an inverter which aims to make all the activities they do using electrical energy are not disturbed. This tool is assisted by using Arduino Uno as the main ingredient which later DC electrical energy, namely the battery, will convert electrical energy that we usually use AC electrical energy
Downloads
References
A. Azis, P. Studi, T. Elektro, F. Teknik, and U. M. Surakarta, “Rancang bangun inverter satu fasa berbasis arduino,” 2019.
A. Izzah, “Rancang Bangun Dan Analisis Inverter Full Bridge 1 Fasa Dengan Berbagai Variasi Input Menggunakan Spwm ( Sinusoidal Pulse Width Modulation ) Rancang Bangun Dan Analisis Inverter Full Bridge 1 Fasa Dengan Berbagai Variasi Input Menggunakan Spwm ( Sinusoida,” Institute Teknologi Sepuluh November, 2017.
S. Y. Panggabean, “Rancang Bangun Inverter Satu Fasa Menggunakan Teknik High Voltage Pwm ( Pulse Width Modulation ),” Rancang Bangun Inverter Satu Fasa Menggunakan Teknik High Voltage PWM (Pulse Width Modulation) Subastian, vol. 11, no. 2, pp. 1–9, 2017.
A. I. Maiyatullah, I. Agus, G. Permana, M. T. Dadan, N. Ramadhan, and S. Pd, “PERANCANGAN DAN IMPLEMENTASI INVERTER SEBAGAI SOLUSI ELEKTRIFIKASI WARGA DI PERUMAHAN BUAH BATU DESIGN AND IMPLEMENTATION INVERTER AS ELECTRIFICATION SOLUTION OF RESIDENT AT HOUSE BUAH BATU,” vol. 5, no. 3, pp. 2961–2969, 2019.
S. Anang, “Rancang Bangun Inverter Dc Ke Ac Satu Fasa Mode Push Pull Berbasis Arduino,” 2016.
Dendri, “Ubah Arus Listrik DC ke AC,” pp. 1–4.
P. Studi, T. Elektro, F. Teknik, and U. M. Semarang, “Jurnal tugas akhir analisa beban arus pada inverter dan trafo pada waktu pemakaian dan pengisisan aki,” pp. 1–16, 2017.
P. Studi, T. Elektro, J. T. Elektro, F. Sains, D. A. N. Teknologi, and U. S. Dharma, “Tugas Akhir Inverter Dengan Tegangan Masukan 12V Dc Dan Tegangan Keluaran Ac Dengan Final Project Inverter With 12 V Dc Input Voltage and Ac Output Voltage With Adjustable,” 2019.
D. Wandri, Waskito, and Purwantono, “PENGARUH ARUS AC DAN DC TERHADAP HASIL PENGELASAN,” Carbohydrate Polymers, vol. 17, no. 1, pp. 1–13, 2016.
A. J. Maabuat et al., “Perancangan Proteksi Inverter Berbasis Arduino Uno,” Jurnal Teknik Elektro dan Komputer, vol. 9, no. 1, pp. 39–48, 2020.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Inverter Mengubah Arus Listrik DC ke AC Berbasis Arduino Uno
Pages: 295-299
Copyright (c) 2021 Risky Binsar Pandapotan Simanjuntak, M Safii, Fitri Anggraini, Sumarno Sumarno, Indra Gunawan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
