Rancang Bangun Konverter Modbus RTU RS485 ke Modbus TCP/IP Berbasis ATMEGA2560
Abstract
In the electricity’s world, there are panels that are used to display electrical measurements or what is known as a Digital Panel Meter (DPM). This DPM measures physical quantities such as current, voltage, power, frequency and so on. In addition, this panel serves as a monitor for the quality of the electricity supply. In medium voltage systems, DPM is integrated with Automatic Meter Reading (AMR) which functions as a data collection tool for energy consumption of electricity consumers. So this DPM is a very important tool. Problems arise when connecting from one DPM to another, because this DPM usually uses RS-485 for its communication system. Such communication can only be carried out with equipment of the same standard. Therefore, it is proposed to design a Modbus RTU RS-485 converter to Modbus TCP/IP. This is done so that DPM communication can be directly connected to computers or to network devices such as routers, hubs and switches. Stages of research that begins with the analysis of problems and system requirements. Next do the design and realization. From the research conducted, the tool runs well. The test uses the modbus poll software as a comparison of the measurement results from the tool. The results show that the device data and those that appear on the modbus poll have high accuracy, for example, the device shows a voltage of 227.2 V; when using the software the result is 227.25 V
Downloads
References
R. Hariyati and J. T. Elektro, “ANALISIS PEMBACAAN METER OTOMATIS LISTRIK DENGAN MENGGUNAKAN JARINGAN KOMUNIKASI,” Jurnal Energi & Kelistrikan, vol. 7, no. 1, pp. 92–102, 2015.
B.-K. Moon, “Survey on Serial Buses,” Japan: CISL Winter Workshop, Feb. 2002.
T. Tosin, “Perancangan dan Implementasi Komunikasi RS-485 Menggunakan Protokol Modbus RTU dan Modbus TCP Pada Sistem Pick-By-Light,” Komputika : Jurnal Sistem Komputer, vol. 10, no. 1, pp. 85–91, Mar. 2021, doi: 10.34010/komputika.v10i1.3557.
Z. Ahyadi, E. Prasetyo, and I. Noor, “SISTEM IOT UNTUK MONITORING PENGGUNAAN ENERGI LISTRIK DENGAN PROTOKOL MQTT,” Print) Jurnal POROS TEKNIK, vol. 13, no. 1, pp. 52–58, 2021.
I. B. de Brito and R. T. de Sousa, “Development of an Open-Source Testbed Based on the Modbus Protocol for Cybersecurity Analysis of Nuclear Power Plants,” Applied Sciences (Switzerland), vol. 12, no. 15, Aug. 2022, doi: 10.3390/app12157942.
S. Huda, T. B. Imansah, and E. D. Hartono, “Prototipe Monitoring Daya Listrik danPengendalian Perangkat Elektronik Skala Industri Berbasis IoT di CV. Wellracom Nusantara Surabaya,” Jurnal Informatika Merdeka Pasuruan, vol. 7, no. 2, pp. 1–7, 2022.
J. Teng, J. S. Setaidji, and R. Lim, “SISTEM PEMBACAAN DATA POWER METERDENGAN KOMUNIKASI MODBUS SECARATERPUSAT,” Seminar Nasional Fortel Regional 7, pp. 1–6, 2019.
M. Amin, J. Triyanto, I. Pusat, and R. Fasilitas Nuklir -Batan, “RANCANGAN PERANGKAT LUNAK AKUISISI DATA MODUL DETEKTOR GAMMA RosRao BERBASIS MODBUS OVER TCP/IP MENGGUNAKAN PyQT5,” vol. 17, no. 1, 2020.
P. Kit Praktikum Protokol Modbus RTU Berbiaya Rendah Berbasis Arduino Mega, D. H. Kurnia dan Feri Siswoyo, and D. Kurnia dan, “PERANCANGAN KIT PRAKTIKUM PROTOKOL MODBUS RTU BERBIAYA RENDAH BERBASIS ARDUINO MEGA 1,” ELEKTRA, vol. 3, no. 2, pp. 11–18, 2018.
M. Amin, J. Triyanto, I. Pusat, and R. Fasilitas Nuklir -Batan, “RANCANGAN PERANGKAT LUNAK AKUISISI DATA MODUL DETEKTOR GAMMA RosRao BERBASIS MODBUS OVER TCP/IP MENGGUNAKAN PyQT5,” vol. 17, no. 1, 2020.
R. Amaliawati, A. Surya Wibowo, and M. A. Murti, “PERANCANGAN SISTEM KOMUNIKASI PLC DENGAN RASPBERRY PI VIA PROTOKOL MODBUS DESIGN OF PLC COMMUNICATION SYSTEMS WITH RASPBERRY PI VIA MODBUS PROTOCOL.”
S. Karaca and O. Akbati, “MODBUS GATEWAY DESIGN USING ARM MICROPROCESSOR,” International Journal of Innovation Scientific Research and Review, vol. 03, pp. 1373–1376, 2021, [Online]. Available: http://www.journalijisr.com
J. Goldwin Lie and Y. Ceng Giap, “Perancangan Alat Pakan Ikan Otomatis Dengan Metode Prototype Menggunakan Mikrokontroller Node Mcu Esp 8266,” vol. 3, no. 2, pp. 54–67.
R. Candra, N. Santi, and A. Fitriyah, “Perancangan Interaksi Pengguna (User Interaction Design) Menggunakan Metode Prototyping,” vol. 9, no. 2.
S. Chandra Satapathy Vikrant Bhateja Swagatam Das Editors, “Smart Innovation, Systems and Technologies 77 Smart Computing and Informatics.” [Online]. Available: http://www.springer.com/series/8767
S. R. Ningsih, A. H. S. Budi, A. T. Nugraha, and T. Winata, “Automatic farmer pest repellent with Arduino ATmega2560 based on sound displacement technique,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, May 2020. doi: 10.1088/1757-899X/850/1/012034.
M. Natsir, D. Bayu Rendra, and A. Derby Yudha Anggara, “IMPLEMENTASI IOT UNTUK SISTEM KENDALI AC OTOMATIS PADA RUANG KELAS DI UNIVERSITAS SERANG RAYA,” vol. 6, no. 1, 2019, [Online]. Available: https://www.arduino.cc/en/Products/Counterfeit
A. Sari, N. Utami, S. Samsugi, and S. D. Ramdan, “PENGEMBANGAN KOPER PINTAR BERBASIS ARDUINO Development of smart suitcases-based arduino,” 2020.
A. Eko Widodo, “Otomatisasi Pemilah Sampah Berbasis Arduino Uno,” IJSE-Indonesian Journal on Software Engineering, vol. 6, no. 1, pp. 12–18, 2020.
Witte Software, “Modbus Poll / Prime Communications Setup,” May 27, 2023. http://www.modbustools.com/modbus_poll.asp
S. Fitriani and Y. Sofyan, “Simulator Human Machine Interface (HMI) using visual basic on the SCADA system,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, May 2020. doi: 10.1088/1757-899X/830/3/032016.
S. Fitriani, M. R. Sholahuddin, and S. D. Setiarini, “Rancang Bangun REST API Aplikasi Sistem Informasi Gardu Distribusi berbasis Android dan Web,” Journal of Information System Research (JOSH), vol. 4, no. 1, pp. 219–226, Oct. 2022, doi: 10.47065/josh.v4i1.2362.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Konverter Modbus RTU RS485 ke Modbus TCP/IP Berbasis ATMEGA2560
Pages: 470-477
Copyright (c) 2023 Yusuf Sofyan, Sofy Fitriani

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).