Jemuran Pintar Dengan Sensor Ldr, Sensor Hujan, Sensor Suhu Dan Sensor KecepatanAngin Berbasis Arduino
Abstract
Rapid technological advances that this time we can use to protect our clothesline out of the rain or the weather is not friendly. By using Arduino Mega2560 as the control center, we can design a system prototype for smart clothesline. In this research, the design proposes a clothesline smart equipped with a light sensor, rain sensor, humidity sensor, wind speed sensor, and equipped with fans and lights as the clothes dryer in wet or damp conditions. We do not need to worry about the clothes that are on the line if the weather conditions are not friendly or clothes are still wet or damp, because it is protected with a clever system whereby clothesline clothesline will be entered into a security room at a time when the weather in the rain, overcast, or strong winds and when clothes are safety dirungan still wet or damp, eating humidity sensor will give input to the Arduino Mega 2560 to carry out the drying process by the fan and lights so we do not have to worry anymore if the clothes are dried in the sun is still wet or damp. The design tool created smart clothesline as a whole can work well and allow can be applied in everyday life.
Downloads
References
Adha, O. P., Muid, A. and Brianorman, Y. (2015) ‘PROTOTIPE SISTEM BUKA TUTUP ATAP JEMURAN PAKAIAN MENGGUNAKAN MIKROKONTROLER ATMEGA8’, Jurnal Coding Sistem Komputer Untan, 03(1), pp. 20–29. Available at: Prototipe, Jemuran Otomatis, Mikrokontroler ATMega8.%0A.
Feriska, A. and Triyanto, D. (2017) ‘RANCANGAN BANGUNAN PENJEMUR DAN PENGERING PAKAIAN OTOMATIS BERBASIS MIKROKONTROLER’, Jurnal Coding Sistem Komputer Untan, 5(2), pp. 67–76.
Hafiz, A. Fardian . Rahman , A.(2017) ‘RANCANGAN BANGUN PROTOTIPE PENGUKURAN DAN PEMANTAUAN SUHU, KELEMBABAN SERTA CAHAYA SECARA OTOMATIS BERBASIS IOT PADA RUMAH JAMUR MERANG’ ,Jurusan Teknik Elektro, 2(3), pp. 51-57.
Kevin and Bacharuddin, F. (2017) ‘SISTEM PERINGATAN SISA PULSA PADA KWH METER DIGITAL PRABAYAR’, TESLA, 19(1), pp. 68–80.
Laksono, A. B. and Abidin, Z. (2014) ‘PERANCANGAN DAN PEMBUATAN ALAT JEMURAN OTOMATIS SENSOR DETEKSI BASAH’, Jurnal Teknik A, 6(2), pp. 593–596. Available at: http://journal.unisla.ac.id/pdf/11622014/Arif Budi laksono, Zaenal Abidin.pdf.
Lenni and Ajis, A. (2018) ‘RANCANG BANGUN ATAP JEMURAN PAKAIAN OTOMATIS MENGGUNAKAN SENSOR HUJAN , SENSOR LDR , SENSOR INFRA RED DAN REMOTE BERBASIS ARDUINO UNO R3’, DINAMIKA UMT, II(2), pp. 58–77.
Mahar, M. L., Tahtawi, A. R. Al and Sudrajat (2017) ‘PERANCANGAN DAN REALISASI ANEMOMETER DIGITAL UNTUK APLIKASI SISTEM PERINGATAN DINI’, Jurnal Teknologi Rekayasa, 2(2), pp. 91–96. doi: 10.31544/jtera.v2.i2.2017.91-96.
Marpaung, N. (2017) ‘PERANCANGAN PROTOTYPE JEMURAN PINTAR BERBASIS ARDUNIO UNO R3 MENGGUNAKAN SENSOR LDR DAN SEMSOR AIR’, Riau Journal Of Computer Science, 3(2), pp. 71–80.
Nugroho, N. and Agustina, S. (2013) ‘ANALISIS MOTOR DC (DIRECT CURRENT) SEBAGAI PENGGERAKAN MOBIL LISTRIK’, Mikrotiga, 2(1), pp. 28–34. Available at: http://www.ejournal.undip.ac.id/index.php/transmisi/article/view/5042.
Siswanto, D. and Winardi, S. (2015) ‘JEMURAN PAKAIAN OTOMATIS MENGGUNAKAN SENSOR HUJAN DAN SENSOR LDR BERBASIS ARDUINO UNO’, e-Jurnal NAROIDROIDDROID, 1(2), pp. 66–73.
Wicaksono,M ,Fajar. And Hidayat (2017) MUDAH BELAJAR MIKROKONTROLER ARDUINO’,Penerbit INFORMATIKA.
Wijarnarko, D. and Munawir, A. (2018) ‘SISTEM KONTROL DUA TIPE TIRAI MENGGUNAKAN SENSOR CAHAYA DAN APLIKASI ANDROID BERBASIS ARDUINO UNO’ , Program StudiTeknikKomputer, JurusanTeknologiInformasi, PoliteknikNegeriJember, 4(4),pp. 298-302
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Jemuran Pintar Dengan Sensor Ldr, Sensor Hujan, Sensor Suhu Dan Sensor KecepatanAngin Berbasis Arduino
Pages: 75-81
Copyright (c) 2019 Togap Munaz Banjarnahor, Sumarno Sumarno, Bahrudi Efendi Damanik, Indra Gunawan, Ika Okta Kirana

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).





















