Rancang Bangun Sistem Robot Pemilah Sampah Anorganik dengan Inductive Proximity dan LDR Sebagai Sensor
- Elfirza Rosiana Universitas Pamulang, Tangerang Selatan, Indonesia
-
Rizki Perdana
*
Universitas Pamulang, Tangerang Selatan,
Indonesia
(*) Corresponding Author
Abstract
The existence of garbage from day to day has always increased. In 2019, waste in Indonesia reached 98 million tons. Problems that arise because management of waste that is not done well, can hinder waste management. It is necessary to create a system that can sort waste according to its type so that the grouping of waste becomes more practical and the recycling process can be done easily. In this research, inorganic waste sorting robot was created that can be used as an automatic trash can that can sort and place inorganic waste according to its type. This system works by involving an inductive proximity sensor to detect metal waste and a light dependent resistor sensor equipped with a laser to detect metal waste, paper and plastic waste. From the results of testing on the tool, the accuracy of the detection of waste types for metal waste, paper waste and plastic waste is 84%, 88% and 90%, respectively. While the average response time of the non-organic waste sorting robot in detecting each type of waste is 2.15028 seconds for metal waste, 2.15014 seconds for paper waste and 2.15028 seconds for plastic waste
Downloads
References
H. P. Putra and S. N. Wahid, “Pembuatan Trainer Tempat Sampah Otomatis Guna Menyiasati Masalah Sampah Di Lingkungan Masyarakat,” JEEE-U (Journal Electr. Electron. Eng., vol. 3, no. 1, pp. 120–137, 2019, doi: 10.21070/jeee-u.v3i1.2087.
S. Keerthana, B. Kiruthika, R. Lokeshvaran, B. Midhunchakkaravarthi, and G. Dhivyasri, “A Review on Smart Waste Collection and Disposal System,” J. Phys. Conf. Ser., vol. 1969, no. 1, 2021, doi: 10.1088/1742-6596/1969/1/012029.
F. R. Maulana, T. A. S. Widyanto, Y. Pratama, and K. Mutijarsa, “Design and Development of Smart Trash Bin Prototype for Municipal Solid Waste Management,” Proceeding - 2018 Int. Conf. ICT Smart Soc. Innov. Towar. Smart Soc. Soc. 5.0, ICISS 2018, no. October, pp. 1–6, 2018, doi: 10.1109/ICTSS.2018.8550013.
Y. G. Wibowo and A. Izzuddin, “Integrasi Pengolahan Sampah Metode 3r Dengan Bank Sampah Di SMA Bima Ambulu,” J. Pengabdi. Masy. Manag., vol. 2, no. 1, pp. 19–23, 2021, doi: 10.32528/jpmm.v2i1.5002.
R. P. Chandra and T. Tawami, “Design of Smart Trash Bin,” IOP Conf. Ser. Mater. Sci. Eng., vol. 879, no. 1, pp. 0–6, 2020, doi: 10.1088/1757-899X/879/1/012155.
D. Nusyirwan, “Tong Sampah Pintar Dengan Perintah Suara Guna Menghilangkan Perilaku Siswa Membuang Sampah Sembarangan Di Sekolah,” J. Teknoinfo, vol. 14, no. 1, p. 48, 2020, doi: 10.33365/jti.v14i1.336.
M. Wijayanti, “Design and Construction of Smart Garage Using Ultrasonic Sensor HC-SR04 and MQ-2 Gas Sensor Based on Arduino Uno,” J. Info Sains Inform. dan Sains, vol. 12, no. 01, pp. 1–6, 2022.
E. W. Vetricha Wulandari, “Automated Trash Sorting Design Based Microcontroller Arduino Mega 2560 with LCD Display and Sound Notification,” IOP Conf. Ser. Mater. Sci. Eng., vol. 725, no. 1, pp. 0–12, 2020, doi: 10.1088/1757-899X/725/1/012054.
M. H. Chowdhury, “Development of Automatic Smart Waste Sorter Machine Paper ID : AM-012 Development of Automatic Smart Waste Sorter Machine,” vol. 2013, no. November, pp. 1–3, 2013.
F. I. Pasaribu and M. Marcopolo, “Perancangan Prototype Alat Pemilah Sampah Otomatis,” RELE (Rekayasa Elektr. dan Energi) J. Tek. Elektro, vol. 2, no. 1, pp. 22–29, 2019, doi: 10.30596/rele.v2i1.3645.
G. Sabiini and J. Rishmany, “Sorting and Miniaturization of Household Waste,” Eur. J. Sci. Res., vol. 153, no. 3, pp. 283–298, 2019.
M. Yunus, “Rancang Bangun Prototipe Tempat Sampah Pintar Pemilah Sampah Organik Dan Anorganik Menggunakan Arduino,” Proceeding STIMA, vol. 1, no. 1, pp. 340–343, 2018.
S. A. Yudhistirani, L. Syaufina, and S. Mulatsih, “Desain Sistem Pengelolaan Sampah Melalui Pemilahan Sampah Organik Dan Anorganik Berdasarkan Persepsi Ibu - Ibu Rumah Tangga,” J. Konversi, vol. 4, no. 2, p. 29, 2016, doi: 10.24853/konversi.4.2.29-42.
K. Fatmawati, E. Sabna, and Y. Irawan, “Rancang Bangun Tempat Sampah Pintar Menggunakan Sensor Jarak Berbasis Mikrokontroler Arduino,” Riau J. Comput. Sci., vol. 6, no. 2, pp. 124–134, 2020.
H. Zakaria, D. Febiyanto, and P. Rosyani, “Sistem Bilik Steril Dengan Perangkat Mist Maker Dan Arduino Uno Menggunakan Metode Sekuensial Linier,” vol. 4, no. 1, pp. 263–269, 2022, doi: 10.47065/bits.v4i1.1687.
W. A. Nurtiyanto, P. Rosyani, and M. K. Ihksanudin, “Security Sistem Pada Brankas dengan Metode Personal Identifikasi Number Berpola Aritmatika Modulo,” Build. Informatics, Technol. Sci., vol. 3, no. 4, pp. 610–616, 2022, doi: 10.47065/bits.v3i4.1368.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Sistem Robot Pemilah Sampah Anorganik dengan Inductive Proximity dan LDR Sebagai Sensor
Pages: 1001−1009
Copyright (c) 2022 Elfirza Rosiana, Rizki Perdana
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
