Rancang Bangun Sistem Notifikasi Sepeda Motor Menggunakan Modul GSM Berbasis Mikrokontroler
Abstract
The notification system for two-wheeled motorcycles is currently very ineffective, so that the theft of motorcycles is very high if they still use an alarm without notification to the owner of the motor vehicle. So that the motorcycle notification system using a GSM module based on a microcontroller can be an alternative to secure motorcycles from theft. The purpose of this study is to make a notification system using the GSM SIM800L module to provide notifications and use an RFID Reader to replace the contact system on a motorcycle. The test results from this study are the performance of the notification system using a GSM module based on this microcontroller can work well. When the RFID receives input from the e-KTP ID Tag and is forwarded to the microcontroller and forwarded to the SIM800L to send an SMS notification, the microcontroller will give the output to the relay to turn on the electricity on the motorcycle.
Downloads
References
Badan Pusat Statistik, “Perkembangan Jumlah Kendaraan Bermotor Menurut Jenis (Unit), 2017-2019,” www.bps.go.id, 2019. https://www.bps.go.id/indicator/17/57/1/jumlah-kendaraan-bermotor.html (accessed Nov. 03, 2021).
I. Usman, A. Fuad, and S. Lutfi, “Sistem Keamanan Kendaraan Melalui Short Message Service (Sms) Menggunakan Mikrokontroller Arduino,” JIKO (Jurnal Inform. dan Komputer), vol. 2, no. 1, pp. 41–48, 2019, doi: 10.33387/jiko.v2i1.1055.
H. Simanjuntak, R. Pramudita, and N. Safitri, “Sistem Keamanan Sepeda Motor Berbasis Arduino Menggunakan GPS Dan Radio Frequency Identification (RFID),” J. ICT Inf. Commun. Technol., vol. 20, pp. 47–53, 2020.
H. Hermawan, R. Rahmadewi, and I. A. Bangsa, “Sistem Keamanan Sepeda Motor Berbasis RFID Starter System Dengan Implementasi GPS Tracking Menggunakan Arduino,” JREC (Journal Electr. Electron., vol. 9, no. 1, pp. 1–8, 2021.
A. Surahman, A. Tri Prastowo, and L. Ashari Aziz, “Rancang Alat Keamanan Sepeda Motor Honda Beat Berbasis Sim Gsm Menggunakan Metode Rancang Bangun,” J. Univ. Teknokr. Indones., vol. 3, no. 1, pp. 17–24, 2022.
G. E. L. Sinaga, Indra Gunawan, Irawan, and Poningsih, “Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis Arduino Uno Menggunakan Gps Dan Relay Melalui Smartphone,” STORAGE J. Ilm. Tek. dan Ilmu Komput., vol. 1, no. 1, pp. 1–7, 2022, doi: 10.55123/storage.v1i1.154.
H. N. Syaddad, “Perancangan Sistem Keamanan Sepeda Motor Menggunakan Gps Tracker Berbasis Mikrokontroler Pada Kendaraan Bermotor,” Media J. Inform., vol. 11, no. 2, p. 26, 2020, doi: 10.35194/mji.v11i2.1035.
J. Putra, Sumarno, B. E. Damanik, D. Hartama, and I. Gunawan, “Monitoring Keamanan Toko Menggunakan Sensor Pir dan Pintu Berbasis Arduino dengan Notifikasi SMS Gateway,” Build. Informatics, Technol. Sci., vol. 1, no. 2, pp. 82–88, 2019.
B. O. Arfian, “PEMBUATAN SISTEM KEAMANAN KENDARAAN BERMOTOR RODA DUA MENGGUNAKAN RFID,” 2019.
R. Hamdani, I. Heni Puspita, and B. R. Dedy Wildan, “PEMBUATAN SISTEM PENGAMANAN KENDARAAN BERMOTOR BERBASIS RADIO FREQUENCY IDENTIFICATION (RFID),” 2019.
A. D. Limantara, Y. C. S. Purnomo, and S. W. Mudjanarko, “Pemodelan Sistem Pelacakan Lot Parkir Kosong Berbasis Sensor Ultrasonic Dan Internet of Things (Iot) Pada Lahan Parkir Diluar Jalan,” Semin. Nas. Sains dan Teknol., vol. 1, no. 2, pp. 1–10, 2017, [Online]. Available: jurnal.umj.ac.id/index.php/semnastek.
O. B. Olalekan, “Development of a Sim800l Based Reprogrammable Household Smart Security System with Recipient Phone Call Alert,” vol. 4, no. 1, pp. 15–20, 2017.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Sistem Notifikasi Sepeda Motor Menggunakan Modul GSM Berbasis Mikrokontroler
Pages: 529-536
Copyright (c) 2022 Gidion Fajar Tri Krisnadi, Wiwin Sulistyo

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).





















