Penerapan Metode Simple Additive Weigthing Untuk Penentuan Level Kondisi Penyandang Disabilitas
-
Asminah Asminah
*
Institut Teknologi Pagar Alam, Pagar Alam,
Indonesia
(*) Corresponding Author
Abstract
The Pagar Alam City Service determines the level of condition of persons with disabilities by collecting data in the field, then the results are determined by conclusions and logic based on individual characteristics without any further calculations through predetermined criteria. So that in determining the level of the condition of persons with disabilities, errors often occur with results that are not optimal, such as errors in predicting and determining the condition of persons with disabilities, besides that the data collection process is still recorded in a book and then recapitulated into the Microsoft Excel application so that this method still often accumulates data. This research has the aim of creating a system that is able to determine the level of condition of persons with disabilities by applying the SAW or Simple Additive Weighting calculation method. The results of this study are a decision support system that is able to determine the level of conditions for people with disabilities including people who are blind, deaf, quadriplegic, speech impaired and mentally retarded with mild, moderate and severe conditions using the Simple Additive Weighting (SAW) calculation method.
Downloads
References
D. Hendarsyah, “E-Commerce Di Era Industri 4.0 Dan Society 5.0,” IQTISHADUNA J. Ilm. Ekon. Kita, vol. 8, no. 2, pp. 171–184, 2019, doi: 10.46367/iqtishaduna.v8i2.170.
I. M. Sinaga, A. Lubis, and A. Prayud, “Pengaruh Internet Financial Reporting ( IFR ) Dan Tingkat Pengungkapan Informasi Website Terhadap Frekuensi Perdagangan Saham Perusahaan Pertambangan Yang Terdaftar di BEI,” J. Ilm. Manaj. dan Bisnis, vol. 1, no. 1, pp. 106–111, 2020, [Online]. Available: http://jurnalmahasiswa.uma.ac.id/index.php/jimbi.
H. T. Sihotang and M. Siboro, “Aplikasi Sistem Pendukung Keputusan Penentuan Siswa Bermasalah Menggunakan Metode Saw Pada Sekolah SMP Swasta Mulia Pratama Medan,” J. Informatics Pelita Nusant., vol. 1, no. 1, pp. 1–6, 2016, [Online]. Available: http://e-jurnal.pelitanusantara.ac.id/index.php/JIPN/article/view/148/69.
R. A. Fazri, “Perbandingan Metode Simple Additive Weighting dan Weighted Product Pada Keputusan Pemberian Bantuan (Desa Cisarua, Kabupaten Sukabumi),” JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 8, no. 1, pp. 273–286, 2021, doi: 10.35957/jatisi.v8i1.674.
S. Nurlela, A. Akmaludin, S. Hadianti, and L. Yusuf, “Penyeleksian Jurusan Terfavorit Pada Smk Sirajul Falah Dengan Metode Saw,” J. Pilar Nusa Mandiri, vol. 15, no. 1, pp. 1–6, 2019, doi: 10.33480/pilar.v15i1.1.
N. Lestari and L. L. Van FC, “Sistem penunjang keputusan penetapan siswa inklusi kesulitan belajar di sekolah dasar,” Digit. Zo. J. Teknol. Inf. dan Komun., vol. 9, no. 1, pp. 71–81, 2018, doi: 10.31849/digitalzone.v9i1.670.
O. Alfina and F. Harahap, “Implementasi Metode Topsis Dalam Penentuan Kelas Siswa Tunagrahita,” Pros. Semin. Nas. Ris. Inf. Sci., vol. 1, no. September, p. 191, 2019, doi: 10.30645/senaris.v1i0.23.
Fadhliaziz and Sarjono, “Program Keluarga Harapan Dengan Simple Additive Weighting (Saw) Pada Dinas Sosial , Kependudukan Dan Pencatatan Sipil Provinsi Jambi,” J. Manaj. Sist. Inf., vol. 4, no. 2, pp. 126–136, 2019.
A. L. Setyabudhi, Z. S. Hasibuan, T. Store, U. I. Sina, and O. Shop, “SISTEM INFORMASI ONLINE SHOP,” vol. 2, no. 2, pp. 70–81, 2020.
R. Yusuf and N. Afrida, “Perancangan Sistem Pendukung Keptusan Dalam Menentukan Siswa Inklusi,” Int. Res. Big-Data Comput. Technol. I-Robot, vol. 1, no. 1, pp. 52–65, 2017, doi: 10.53514/ir.v1i1.6.
M. Muslihudin and D. Rahayu, “Sistem Pendukung Keputusan Siswa Berprestasi Menggunakan Metode Weighted Product,” Technol. Accept. Model, vol. 9, no. 2, pp. 114–119, 2018.
A. Mira Yunita, E. Nurafliyan Susanti, and R. Rizky, “Implementasi Metode Weight Product Dalam Penentuan Klasifikasi Kelas Tunagrahita,” JSiI (Jurnal Sist. Informasi), vol. 7, no. 2, pp. 78–82, 2020, doi: 10.30656/jsii.v7i2.2408.
A. Basuki, Sistem Pendukung Keputusan. Yogyakarta: CV. BUDI UTAMA, 2016.
Diana, Metode dan Aplikasi Sistem Pendukung Keputusan. Yogyakarta: CV. BUDI UTAMA, 2018.
T. A. Kurniawan, “Pemodelan Use Case (UML): Evaluasi Terhadap beberapa Kesalahan dalam Praktik,” J. Teknol. Inf. dan Ilmu Komput., vol. 5, no. 1, p. 77, 2018, doi: 10.25126/jtiik.201851610.
Rosa and M.salahuddin, Rekayasa Perangkat Lunak, April 2018. Bandung: Informatika Bandung, 2018.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penerapan Metode Simple Additive Weigthing Untuk Penentuan Level Kondisi Penyandang Disabilitas
Pages: 559-565
Copyright (c) 2022 Asminah Asminah
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
