Prototype Pengendali Lampu Pada Rumah Pintar dengan Tinkercad
-
Nober Yohanis
*
Sekolah Tinggi Manajemen Informatika dan Komputer Widya Cipta Dharma, Samarinda,
Indonesia
- Azahari Azahari Sekolah Tinggi Manajemen Informatika dan Komputer Widya Cipta Dharma, Samarinda, Indonesia
- Ahmad Fajri Sekolah Tinggi Manajemen Informatika dan Komputer Widya Cipta Dharma, Samarinda, Indonesia (*) Corresponding Author
Abstract
The development of automation technology has encouraged the implementation of smart home concepts aimed at improving comfort, efficiency, and convenience in controlling electronic devices, particularly lighting systems. This study aims to design and implement an automatic lamp control prototype through simulation using Tinkercad by utilizing Arduino Uno, an LDR sensor as a light intensity detector, PIR sensors as motion detectors, and a relay as the lamp controller. The method used in this research is the Prototyping Process Model, which is carried out iteratively through the stages of communication, planning, design, prototype construction, evaluation, and system refinement. The results show that the system operates according to the designed logic, where the lamp turns on only under dark conditions when motion is detected, and remains off under bright conditions even when activity is present. The use of multiple PIR sensors has proven effective in expanding motion detection coverage, thereby increasing system responsiveness, while the LDR sensor plays an important role in improving energy efficiency by preventing unnecessary electricity consumption. Simulation using Tinkercad has also proven effective in simplifying the design and testing process before real-world implementation. The contribution of this research is the development of a smart home lighting control prototype that has been validated through Tinkercad simulation as an initial testing platform, thereby reducing hardware development costs and risks while providing a reference for the future development of Arduino-based smart home automation systems.
Downloads
References
D. Bramasta, I. Ramadhan, and S. A. Prasetyo, “Perancangan dan Implementasi Smart Home untuk Pengendalian Lampu Otomatis Menggunakan ESP32 dan Aplikasi Blynk,” Semin. Nas. Teknol. Inf. dan Bisnis, vol. 1, no. 1, pp. 653–658, 2025.
M. Maulana, A. Noor, and A. Supriyanto, “Purwarupa Sistem Rumah Pintar Berbasis Internet Of Things,” J. Inform. Rekayasa Elektron., vol. 5, no. 2, pp. 272–282, 2022.
B. Rachman, R. Suppa, and A. A. Hakam, “Rancang Bangun Smart Lamp Menggunakan Nodemcu Berbasis Internet Of Things ( IoT ),” J. Inform. dan Tek. Elektro Terap., vol. 13, no. 1, 2025, doi: http://dx.doi.org/10.23960/jitet.v13i1.5591.
F. F. Pratama and A. Budjianto, “Smartlighting : Sistem Penerangan Otomatis Berbasis,” J. Mhs. Tek. Inform., vol. 9, no. 6, pp. 9538–9541, 2025.
Sujono and M. W. Ramadhan, “Controlling Lampu Rumah Berbasis IoT,” Exact Pap. Compil., vol. 3, no. 2, pp. 353–360, 2021.
J. Apriyanto, C. G. Irianto, and M. I. Yamin, “Rancangan Smart Lighting Dengan Sensor Cahaya Dan Gerak : Pengujian Desain Di Rumah Tinggal,” J. Educ. Technol., vol. 5, no. 2, pp. 340–353, 2024.
M. A. Qodri, N. Rahaningsih, and R. D. Dana, “Sistem Pengendalian Lampu Rumah Dan Kantor Berbasis Internet Of Things Menggunakan Mikrokontroler Nodemcu ESP8266,” J. Mhs. Tek. Inform., vol. 8, no. 1, pp. 681–686, 2024.
Suratin and C. Fadhilah, “Rancang Bangun Lampu Otomatis Menggunakan Sensor PIR dan LCD Display Berbasis Tinkercad,” J. Elektron. dan Teknol. Inf., vol. 6, no. 2, pp. 12–19, 2025.
N. Alamsyah, H. F. Rahmani, and Yeni, “Lampu Otomatis Menggunakan Sensor Cahaya Berbasis Arduino Uno dengan Alat Sensor LDR,” Formosa J. Appl. Sci., vol. 1, no. 5, pp. 703–712, 2022, doi: https://10.0.218.119/fjas.v1i5.1444.
S. A. Korade, V. Kotak, and A. Durafe, “A Review Paper on Internet of Things ( IoT ) and its Applications,” Int. Res. J. Eng. Technol., vol. 6, no. 6, pp. 1623–1630, 2019.
A. M. Ibrahim and D. Setiyadi, “Prototype Pengendalian Lampu Dan Ac Jarak Jauh Dengan Jaringan Internet Menggunakan Aplikasi Telegram Berbasis,” INFOTECH J. Technol. Inf., vol. 7, no. 1, pp. 27–34, 2021, doi: https://doi.org/10.37365/jti.v7i1.103.
K. J. Purjianto, Nurchim, and M. N. Faiq, “Prototipe Monitoring Energi Listrik Berbasis Internet of Things ( IoT ) guna Mewujudkan Rumah Pintar,” J. Teknol. Inf. dan Komunikas, vol. 4, no. 1, pp. 4–9, 2024, doi: 10.58918/lofian.v4i1.255.
D. Purnomo, “Model Prototyping Pada Pengembangan Sistem Informasi,” J. Inform. Merdeka Pasuruan, vol. 2, no. 2, pp. 54–61, 2017.
A. Fikriyya and R. T. Dirgahayu, “Implementasi Prototyping dalam Perancangan Sistem Informasi Sekolah Desa Pendar Foundation Yogyakarta,” Autotama, vol. 2, no. 1, p. 1, 2020.
A. Saifudin, A. Febriasnyah, E. Bhanu, N. Adianto, and E. M. Putra, “Pengembangan Sistem Informasi Toko Online Menggunakan Metode Prototyping untuk Penjualan Produk Furniture,” J. Teknol. Sist. Inf. dan Apl., vol. 6, no. 2, pp. 173–179, 2023, doi: 10.32493/jtsi.v6i2.26324.
R. S. Pressman and B. R. Maxim, Software Engineering: A Practitioner’s Approach, Ninth. 2020.
F. N. Hasanah and R. S. Untari, Rekayasa Perangkat Lunak. Umsida Press, 2020.
J. F. Idris et al., “Pengujian fungsional dan struktural aplikasi pengajuan cuti dengan metode black box dan white box,” NARATIF J. Ilm. Nas. Ris. Apl. dan Tek. Inform., vol. 07, no. 01, pp. 84–102, 2025.
L. Artikel, I. Komputer, D. Wintana, D. Pribadi, and M. Y. Nurhadi, “Analisis Perbandingan Efektifitas White-Box Testing dan Black-Box Testing,” J. Ldng. Artik. ILMU Komput. h, vol. 2, no. 1, pp. 8–16, 2022.
G. Chen and D. Kotz, “A survey of context-aware mobile computing,” Dartmouth Computer Science Technical Report, 2000.
M. Rahman, M. Islam, and M. Hossain, “Energy efficient smart lighting system using sensors,” International Journal of Smart Home, vol. 14, no. 2, pp. 25–34, 2020.
K. Patel, M. Shah, and D. Patel, “Smart home automation using PIR sensor,” International Journal of Innovative Technology and Exploring Engineering, vol. 8, no. 6, pp. 1234–1238, 2019.
J. Gubbi, R. Buyya, S. Marusic, and M. Palaniswami, “Internet of Things (IoT): A vision, architectural elements, and future directions,” Future Generation Computer Systems, vol. 29, no. 7, pp. 1645–1660, 2013, doi: 10.1016/j.future.2013.01.010.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Prototype Pengendali Lampu Pada Rumah Pintar dengan Tinkercad
Pages: 38-43
Copyright (c) 2026 Nober Yohanis, Azahari Azahari, Ahmad Fajri
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
