Sistem Mikrokontroler Untuk Menentukan Kualitas Air Yang Dapat di Gunakan Oleh Konsumen dengan Menggunakan Arduino
Abstract
There are now many businesses that provide refilled drinking water in every big city, because besides that, the price that is not too expensive can save time because there is no need for difficulties in obtaining clean water. The owner of the drinking water business still does not know whether the water produced is fit for consumption. Therefore, a tool will be made to measure air quality based on the selected parameter, namely the pH value of the water by using a pH meter sensor based on Arduino Uno and displayed through an LCD screen so that you can see directly the results of the refilled water test.
Downloads
References
A. Putra, A. Indra, and H. Afriyastuti, “PROTOTIPE SISTEM IRIGASI OTOMATIS BERBASIS PANEL SURYA MENGGUNAKAN METODE PID DENGAN SISTEM MONITORING IoT,” Repository.Unib.Ac.Id, 2018.
I. Mahdi and D. Kasoni, “Rancang Bangun Prototype Kelembaban Tanah,” vol. V, no. 1, pp. 77–87, 2019.
M. A. Wijaya, R. Hanifah, and M. C. T. Manullang, “Purwarupa penyiraman otomatis dengan arsitektur mqtt dan logika fuzzy sugeno untuk meningkatkan keefektifan manajemen penyiraman tanaman (studi kasus : itera),” J. Teknol. Inf. Univ. Lambung Mangkurat, vol. 05, no. 2, pp. 49–56, 2020.
P. A. Wulandari, P. Rahima, and S. Hadi, “Rancang Bangun Sistem Penyiraman Otomatis Berbasis Internet of Things Pada Tanaman Hias Sirih Gading,” J. Bumigora Inf. Technol., vol. 2, no. 2, pp. 77–85, 2020.
P. Setiawan, E. Y. Anggraen, P. Studi, S. Informasi, and S. Kelembapan, “Prorotype Sistem Penyiraman Tanaman Otomatis Terjadwal dan Berbasis Sensor Kelembapan Tanah,” Ibi Darmajaya, pp. 277–283, 2019.
V. C. Alverina, J. Siwalankerto, S. Jln, S. Surabaya, and J. Siwalankerto, “Aplikasi Monitoring Kesuburan Tanaman Hias Mawar menggunakan Arduino.”
J. Tarigan and M. Bukit, “Rancang Bangun Sistem Penyiraman Tanaman Secara Mandiri Berbasis Mikrokontroller Atmega 8535,” J. Fis. Fis. Sains dan Apl., vol. 3, no. 3, pp. 137–141, 2018.
D. A. N. Iot and M. R. Fahroni, “mencapai derajat Sarjana S1 Disusun oleh : Jurusan Teknik Elektro Fakultas Teknologi Industri Universitas Islam Indonesia Yogyakarta,” 2020.
L. H. L. Ari Permana L, Sefnath J. Wattimena, “JURNAL PENGABDIAN MASYARAKAT IRON ( sipil , elektro , mesin ),” J. Pengabdi. Masy. IRON (sipil, elektro, mesin), vol. 01, no. 01, pp. 24–29, 2018.
Harifuzzumar, F. Arkan, and Ghiri Basuki Putra, “Perancangan Dan Impelementasi Alat Pemberian Pakan Ikan Lele Otomatis Pada Fase Pendederan Berbasis Arduino Dan Aplikasi Blynk,” Pros. Semin. Nas. Penelit. Pengabdi. pada Masy., pp. 67–71, 2018.
E. A. Suprayitno MT, R. D. M.Kom, and M. A. ST, “Otomasi Sistem Hidroponik DFT (Deep Flow Technique) Berbasis Arduino Android dengan Memanfaatkan Panel Surya sebagai Energi Alternatif,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 3, no. 2, pp. 30–37, 2019.
C. Chotimah and K. P. Kartika, “Sistem Penyiraman Dan Pengusir Hama Otomatis Pada Daun Mint Berbasis Mikrokontroler Arduino Uno,” Antivirus J. Ilm. Tek. Inform., vol. 13, no. 1, pp. 36–47, 2019.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Sistem Mikrokontroler Untuk Menentukan Kualitas Air Yang Dapat di Gunakan Oleh Konsumen dengan Menggunakan Arduino
Pages: 254-259
Copyright (c) 2021 Fahri Rahmadani, Suhada Suhada, Bahrudi Efendi Damanik

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).