Prediksi Produksi Kerajinan Rotan Menerapkan Metode Tsukamoto


  • Anisa Agustina Melani Universitas Darwan Ali, Sampit, Indonesia
  • Muhammad Fajrin Anshari * Mail Universitas Darwan Ali, Sampit, Indonesia
  • (*) Corresponding Author
Keywords: Predictions; Production; Rattan Handicrafts; Tsukamoto Method

Abstract

Rattan handicrafts are one of the most famous handicrafts in all corners of the country. Over time, rattan handicrafts have grown in terms of types and forms. One of the industries that produces rattan handicrafts is Rattan Furniture-Sampit, located in East Kotawaringin, Central Kalimantan. The purpose of this research and application of this method is to predict the amount of rattan production based on material information and based on customer orders, because usually when there is an order the industry only estimates the amount of rattan to be used as crafts and results in more than customer orders. The final result of this research is to find the amount of handicraft production that must be produced based on demand and supply of materials

Downloads

Download data is not yet available.

References

S. Omara, A. S. Honggowibowo, and H. Wintolo, “Perbandingan Metode Fuzzy Tsukamoto Dan Mamdani Untuk Merekomendasi Nilai Simpanan Tabungan Berdasarkan Saldo Rata-Rata Harian Pada Koperasi Jasa Keuangan Syariah (Studi Kasus Di Bmt Bina Ihsanul Fikri),” Compiler, vol. 1, no. 1, pp. 117–131, 2012.

M. Iswan, W. Fitriani, N. Mayasari, and A. P. U. Siahaan, “Tuition Reduction Determination Using Fuzzy Tsukamoto,” Int. J. Eng. Sci. Invent., vol. 5, no. 9, pp. 68–72, 2016.

K. M. Herdiastuti, “Implementasi Algoritma Fuzzy Tsukamoto Untuk Menentukan Jumlah Produksi Roti,” TIKomSiN, pp. 23–29, 2016.

J. Informatika, S. Y. Irianto, and T. Informatika, “Penerapan Metode Fuzzy Inference System Tsukamoto Pada Sistem Pendukung Keputusan Untuk Penerimaan Beasiswa,” J. Inform., vol. 16, no. 1, pp. 10–23, 2016.

H. R. AH, “Fuzzy Inference System Dengan Metode Tsukamoto Sebagai Penunjang Keputusan Produksi (Studi Kasus : PT. Talkindo Selaksa Anugrah),” J. Sist. Inf., vol. 7, no. 1, pp. 753–764, 2015.

S. H. Sianipar, F. T. Waruwu, and L. T. Sianturi, “MEMPREDIKSI JUMLAH PRODUKSI ULOS BATAK DENGAN MENGGUNAKAN LOGIKA FUZZY DENGAN METODE TSUKAMOTO (Studi Kasus Cv. Ala Dos Roha),” KOMIK (Konferensi Nas. Teknol. Inf. dan Komputer), vol. 2, no. 1, pp. 73–77, 2018.

F. P. RANI, D. M. KHAIRINA, and H. R. HATTA, “Berprestasi Menggunakan Metode Multi Objective Optimization on the Basis of Ratio Analysis Decision Support System To Select Pandega Scout Achievement Using Multi Objective Optimization on the Basis of Ratio Analysis,” J. Teknol. Inf. dan Ilmu Komput., vol. MESRAN., R, no. 2, pp. 155–162, 2019.

T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.

S. Kusumadewi, S. Hartati, A. Harjoko, and Retantyo Wardoyo, Fuzzy Multi-Attribute Decision Making (FUZZY MADM). 2006.

M. Afif, H. Haryanto, Y. Rahayu, and E. Mulyanto, “Prediksi Jumlah Produksi Tas Pada Home Industri Body Star Kudus Menggunakan Fuzzy Tsukamoto,” Sisfotenika, vol. 7, no. 2, p. 119, 2017.


Bila bermanfaat silahkan share artikel ini

Berikan Komentar Anda terhadap artikel Prediksi Produksi Kerajinan Rotan Menerapkan Metode Tsukamoto

Article History
Submitted: 2020-11-29 Published: 2021-01-26
How to Cite
Melani, A., & Anshari, M. (2021). Prediksi Produksi Kerajinan Rotan Menerapkan Metode Tsukamoto. Journal of Information System Research (JOSH), 2(2), 116-122. Retrieved from https://ejurnal.seminar-id.com/index.php/josh/article/view/588
Section
Articles