Penggunaan Sistem GPS Untuk Keamanan Kendaraan Dengan Kontrol SMS Menggunakan Mikrokontroler Arduino
Motor vehicle theft cases still often occur around us, this happens because there is still a lack of security systems in motorized vehicles that only use ignition keys and key covers, where the weakness of standard security systems like this has been understood by perpetrators of motor vehicle theft. to perform the action. The need for additional security systems is felt to be very necessary, in order to avoid the occurrence of motor vehicle theft. To overcome all this, a motor vehicle security system was created using SMS with an Arduino-based GPS tracking method, to create a GPS Tracker that can control vehicles via SMS (short message service) that can track or assist the vehicle's position using the Arduino Uno GPS (global positioning system). , SIM 800L. If the vehicle is lost, the owner can be tracked only by SMS to the number that has been programmed on the Arduino uno to prevent and make it easier to get back a stolen motor vehicle.
M. I. B. Zainal Muttaqin, Desi Kisbianty, “Perancangan Sistem Keamanan Sepeda Motor Menggunakan,” J. Ilm. Media Process., vol. 10, no. 2, pp. 1–11, 2016.
Y. P. P. A. Edidas, “Pengembangan Sistem Keamanan Sepeda Motor Mengggunakan Arduino Uno Berbasis Smartphone Android Yoki Purnama Putra 1* , Edidas 2 1,” Vocat. Tek. Elektron. dan Inform., vol. 8, no. 1, pp. 107–115, 2020.
B. Suharjo, S. Falentino, and S. Liawatimena, “Motor Dengan Sistem Sidik Jari,” J. Tek. Komput., vol. 19, no. 1, pp. 17–27, 2016.
Ardiansyah, B. Irawan, and T. Rismawan, “Rancang Bangun Sistem Keamanan Kendaraan Bermotor Dengan Sms Gateway Berbasis Mikrokontroler Dan Android,” J. Coding, Sist. Komput. Untan, vol. 3, no. 1, pp. 11–19, 2015.
S. M. A. SUMARDI, “INTERNET OF THINGS (IoT) PADA PROTOTIPE PENDETEKSI KEBOCORAN GAS BERBASIS MQ-2 dan SIM800L,” Teknik, vol. 7, no. 2, pp. 64–72, 2018.
M. Enst et al., “PERANCANGAN SISTEM KEAMANAN UNTUK MENGETAHUI POSISI KENDARAAN YANG HILANG BERBASIS GPS DAN DITAMPILKAN DENGAN SMARTPHONE,” Acta Univ. Agric. Silvic. Mendelianae Brun., vol. 16, no. 1, pp. 24–25, 2015, doi: 10.30798/makuiibf.323102.
O. K. S. and Herlinawati, “Rancang Bangun Sistem Keamanan Kendaraan Bermotor Berbasis GPS ( Global Positioning System ) dan Koneksi Bluetooth,” Electrician, vol. 11, no. 3, pp. 105–113, 2017.
D. T. and Y. Kurnia, “Simulasi Sistem Keamanan Kendaraan Roda Dua Dengan Smartphone dan GPS Menggunakan Arduino,” ALGOR, vol. 1, no. 2, pp. 9–15, 2020.
H. N. Syaddad, “Perancangan Sistem Keamanan Sepeda Motor Menggunakan Gps Tracker Berbasis Mikrokontroler Pada Kendaraan Bermotor Hasbu Naim Syaddad , Perancangan Sistem Keamanan Sepeda Motor Menggunakan Gps Tracker Berbasis Mikrokontroler Pada Kendaraan Bermotor,” Media J. Inform., vol. 11, no. 2, pp. 26–35, 2019.
A. H. Amir Hamzah Pohan, B. Dianika, R. Akmam, T. Elektro, and U. Teknologi, “MODEL KEAMANAN KENDARAAN RODA EMPAT DENGAN KARTU ID BERBASIS MIKROKONTROLER ARDUINO,” J. Inform. Manaj. dan Komput., vol. 12, no. 1, pp. 20–27, 2020.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Penggunaan Sistem GPS Untuk Keamanan Kendaraan Dengan Kontrol SMS Menggunakan Mikrokontroler Arduino
Copyright (c) 2021 Agung Yusuf Pratama, Muhammad Ridwan Lubis, Anjar Wanto, Indra Gunawan, Ika Okta Kirana
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).