Implementasi ARDUINO UNO R3 dan SENSOR DHT 11 Pada Perancangan Inkubator Penetas Telur Ayam Berbasis Mikrokontroler
-
Angga Sihasani
*
STIKOM Tunas Bangsa, Pematangsiantar,
Indonesia
- Dedy Hartama STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Iin Parlina AMIK Tunas Bangsa, Pematangsiantar, Indonesia
- Solikhun Solikhun AMIK Tunas Bangsa, Pematangsiantar, Indonesia
- Sumarno Sumarno STIKOM Tunas Bangsa, Pematangsiantar, Indonesia (*) Corresponding Author
Abstract
Chicken farmers are currently having difficulty in determining the temperature to hatch chicken eggs because breeders only rely on the hen as the egg incubator. The DHT11 sensor is a sensor for reading the temperature and the ideal temperature for hatching chicken eggs is 37-39, the incubator automatically uses an incandescent lamp as its warmer and uses the DHT 11 sensor as a temperature and humidity incubator, and Ardunio Uno R3 as its microcontroller, incubator hatching chicken eggs work incandescent light bulbs will heat the room in an incubator and if it is already hot the DHT 11 sensor will read the incubator's temperature and humidity and will open through the LCD and if there is already a DHT11 sensor will be sent to the sensor relay to be sent incandescent lamps
Downloads
References
F. Nurpandi and A. P. Sanjaya, “Inkubator Penetasan Telur Ayam Berbasis Arduino,” Media J. Inform., vol. 9, no. 2, pp. 66–77, 2018.
M. S. Hadi, “Sistem kendali otomatis mesin penetas telur menggunakan kontroler PID,” vol. 27, no. 2, pp. 116–124, 2017.
A. Hendriawan, “Inkubator Telur Ayam Menggunakan Lampu DC Dengan Kontrol PID Chicken Egg Incubator Temperature Control Using DC Lights With PID Control,” vol. 4, no. 2, pp. 78–82, 2016.
R. Chen, W. Zhai, and Y. Qi, “Mechanism and technique of friction control by applying electric voltage. (II) Effects of applied voltage on friction,” Mocaxue Xuebao/Tribology, vol. 16, no. 3, pp. 235–238, 1996.
S. Pramono, “Pengendalian Robot Beroda Berbasis Arduino Uno R3 Menggunakan Koneksi Bluetooth,” vol. 1, no. 1, pp. 12–18, 2016.
A. Feriska and D. Triyanto, “Rancangan Bangunan Penjemur Dan Pengering Pakaian Otomatis Berbasis Mikrokontroler,” J. Coding Sist. Komput. Untan, vol. 5, no. 2, pp. 67–76, 2017.
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Implementasi ARDUINO UNO R3 dan SENSOR DHT 11 Pada Perancangan Inkubator Penetas Telur Ayam Berbasis Mikrokontroler
Pages: 101-107
Copyright (c) 2021 Angga Sihasani, Dedy Hartama, Iin Parlina, Solikhun Solikhun, Sumarno Sumarno
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
