Rancang Bangun Sistem Presensi Biometrik Sidik Jari Berbasis IoT dengan Arduino Node MCU
- Rizky Tri Kusuma STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Solikhun Solikhun STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Widodo Saputra STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
- Agus Perdana Windarto STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
-
Della Fatricia Nasution
*
STIKOM Tunas Bangsa, Pematangsiantar,
Indonesia
(*) Corresponding Author
Abstract
Presence is a procedure or process that needs to be carried out by all employees or members of a company or agency. The attendance register is a reference and benchmark for assessing, measuring, and determining the quality and quantity of each member or employee of the company or agency. Presentations carried out manually are considered less effective and efficient in terms of time and usage. So it is necessary to build an intelligent attendance system, one of which is by creating an intelligent attendance system that uses IoT-based fingerprint recognition technology with an Arduino controller and outputs to an Internet or intranet server. Based on the results obtained in the research, administrators can float their side servers freely. The time for sending data from the presence device to the server uses the POST method, with an average time of 8 seconds on an intranet network with a maximum distance of 25 meters from the wireless router or access point. By creating this attendance system, it makes it easier for the Surya Pematangsiantar Education Foundation to record the attendance of teachers and staff, especially SMK units.
Downloads
References
S. Sarimuddin, J. Y. Sari, and S. Bantun, “Sistem Absensi Pegawai Berbasis Rfid (Studi Kasus: Kantor Bkp-Sdm Kabupaten Bombana),” semanTIK, vol. 7, no. 2, p. 125, 2021, doi: 10.55679/semantik.v7i2.20214.
R. Novita and F. R. Hardi, “Sistem Informasi Presensi Karyawan,” J. Ilm. Rekayasa dan Manaj. Sist. Inf., vol. 5, no. 2, p. 230, 2019, doi: 10.24014/rmsi.v5i2.8241.
T. I. Buana, A. Putra Kharisma, and F. Al Huda, “Pengembangan Aplikasi berbasis Android Sistem Presensi dengan menggunakan Validasi Koordinat Lokasi dan Foto Selfie di PT. Bintang Mas Glassolutions,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 6, no. 12, pp. 5799–5808, 2022, [Online]. Available: http://j-ptiik.ub.ac.id
Z. Arifin, S. B. Permadi, E. Budihartono, and Nurohim, “Sistem Absensi Mahasiswa Menggunakan RFID Berbasis Arduino,” Tek. Eng. Sains J., pp. 1–7, 2018.
T. D. Septiawan, R. Kridalukmana, and I. P. Windasari, “Perancangan dan Implementasi Presensi Digital Guru dan Karyawan SMA Negeri 9 Semarang,” J. Teknol. dan Sist. Komput., vol. 4, no. 2, p. 215, 2016, doi: 10.14710/jtsiskom.4.2.2016.215-222.
M. Rosdiana and E. Sutriyatna, “Penerapan Internet Of Things Pada Sistem Aplikasi Presensi Siswa Berbasis Web,” Log. J. Ilmu Komput. dan Pendidik., vol. 1, no. 5, pp. 1100–1107, 2023.
Y. Sari, “Sistem Internet of Things,” Cyber Resil. Syst. Networks, vol. 2019, no. July 2016, pp. 1–150, 2009, [Online]. Available: http://link.springer.com/10.1007/978-3-319-77492-3_16
B. R. U. Putri, I. W. A. Arimbawa, and F. Bimantoro, “Sistem Presensi Siswa Berbasis Internet of Things Menggunakan Sensor Sidik Jari Pada SMK PERHOTELAN 45 MATARAM ( Student Attendance System Using Fingerprint Sensor on the SMK Perhotelan 45 Mataram Based on Internet of Things ),” Jtika, vol. 1, no. 2, pp. 224–232, 2019.
Fachrun Nisa and Nurul Chafid, “PENERAPAN INTERNET OF THINGS (IoT) PADA SISTEM MONITORING RUANG SERVER DI PT. MACROSENTRA NIAGA BOGA,” J. Satya Inform., vol. 6, no. 01, pp. 22–37, 2022, doi: 10.59134/jsk.v6i01.36.
D. Sawitri, “Internet Of Things Memasuki Era Society5.0,” KITEKTRO J. Komputer, Inf. Teknol. dan Elektro, vol. 8, no. 1, pp. 31–35, 2023.
K. P. Aji, U. Darusalam, and N. D. Nathasia, “Perancangan Sistem Presensi Untuk Pegawai Dengan RFID Berbasis IoT Menggunakan NodeMCU ESP8266,” JOINTECS (Journal Inf. Technol. Comput. Sci., vol. 5, no. 1, p. 25, 2020, doi: 10.31328/jointecs.v5i1.1222.
I. A. Wisky, “IMPLEMENTASI SISTEM INFORMASI PENGELOLAAN DATA TRANSAKSI PENJUALAN DAN PERSEDIAAN PRODUK HASIL BUMI DENGAN MENGGUNAKAN BAHASA PEMROGRAMAN PERSONAL HOME PAGE DAN DATABASE MYSQL,” J. Sains dan Teknol. Vol.16, vol. 16, no. 2, 2016.
A. B. dan H. M. Y. Muhammad indra aji and Prodi, “Rancang Bangun Pembaca Rfid Reader 125 Khz Dengan Menggunakan Attiny 85,” Semin. Nas. Fak. Tek. Univ. Malikussaleh Tahun, pp. 419–426, 2022.
D. B. P. Awang Hendrianto Pratomo1), “Presensi Perkuliahan Prodi Teknik Informatika UPN ‘Veteran’Yogyakarta Berbasis Kartu Pintar RFID,” Semin. Nas. Inform., vol. 2015, no. November, pp. 54–67, 2015.
M. Andi Apriadi, Surya Michrandi ST., MT., Fairuz Azmi ST., “PERANCANGAN OTENTIKASI SIDIK JARI PADA BIOMETRIC PAYMENT DESIGN OF AUTHENTICATION FINGERPRINT FOR BIOMETRIC PAYMENT,” e-Proceeding Eng., vol. 3, no. 1, pp. 170–176, 2016.
M. Khasanah, “Implementasi Presensi Elektronik untuk Meningkatkan Kedisiplinan Guru dan Pegawai di Sekolah Dasar Islam,” JIEMAN J. Islam. Educ. Manag., vol. 3, no. 2, pp. 221–236, 2021, doi: 10.35719/jieman.v3i2.82.
O. Dermawan and M. A. Gandhi, “Sistem Absensi Fingerprint : Upaya Mendisiplinkan Kerja Pegawai,” J. Manag. Educ. JMIE, vol. 3, no. 1, pp. 30–37, 2018, [Online]. Available: http://jmie.ftk.uinjambi.ac.id
Bila bermanfaat silahkan share artikel ini
Berikan Komentar Anda terhadap artikel Rancang Bangun Sistem Presensi Biometrik Sidik Jari Berbasis IoT dengan Arduino Node MCU
Pages: 91-102
Copyright (c) 2024 Rizky Tri Kusuma, Solikhun Solikhun, Widodo Saputra, Agus Perdana Windarto, Della Fatricia Nasution
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
